From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/3] x86: Introduce Intel Tangier SoC and Edison board
Date: Wed, 5 Jul 2017 23:56:25 +0300 [thread overview]
Message-ID: <20170705205628.52620-1-andriy.shevchenko@linux.intel.com> (raw)
This brings support for Intel Tangier SoC and Intel Edison board which is using
U-Boot as a main bootloader.
The series has implicit dependency to watchdog driver (V3 of which had been
sent earlier today).
Since v1:
- split patch 1 to 2 (Bin)
- move enum to sfi.h (Bin)
- remove unnecessary headers (Bin)
- add comment to SFI system table search (Bin)
- append and update copyright notices: sdram.c and tangier.c are almost done
by Intel (Simon)
- disable SD card slot (Simon)
- add Simon's tag to patch 1 and 2 (changes basically technical)
- add Edison support
Andy Shevchenko (2):
x86: Add dma-mapping.h to architectural code
x86: Add Intel Edison board files
Felipe Balbi (1):
x86: Add Intel Tangier support
arch/x86/Kconfig | 1 +
arch/x86/cpu/Makefile | 1 +
arch/x86/cpu/tangier/Kconfig | 24 +++++
arch/x86/cpu/tangier/Makefile | 7 ++
arch/x86/cpu/tangier/car.S | 13 +++
arch/x86/cpu/tangier/sdram.c | 206 +++++++++++++++++++++++++++++++++++++
arch/x86/cpu/tangier/tangier.c | 34 ++++++
arch/x86/dts/Makefile | 1 +
arch/x86/dts/edison.dts | 89 ++++++++++++++++
arch/x86/include/asm/dma-mapping.h | 41 ++++++++
arch/x86/include/asm/sfi.h | 19 ++++
board/intel/Kconfig | 8 ++
board/intel/edison/Kconfig | 26 +++++
board/intel/edison/Makefile | 1 +
board/intel/edison/config.mk | 18 ++++
board/intel/edison/edison.c | 104 +++++++++++++++++++
board/intel/edison/edison_start.S | 13 +++
configs/edison_defconfig | 53 ++++++++++
doc/README.x86 | 39 +++++++
include/configs/edison.h | 78 ++++++++++++++
20 files changed, 776 insertions(+)
create mode 100644 arch/x86/cpu/tangier/Kconfig
create mode 100644 arch/x86/cpu/tangier/Makefile
create mode 100644 arch/x86/cpu/tangier/car.S
create mode 100644 arch/x86/cpu/tangier/sdram.c
create mode 100644 arch/x86/cpu/tangier/tangier.c
create mode 100644 arch/x86/dts/edison.dts
create mode 100644 arch/x86/include/asm/dma-mapping.h
create mode 100644 board/intel/edison/Kconfig
create mode 100644 board/intel/edison/Makefile
create mode 100644 board/intel/edison/config.mk
create mode 100644 board/intel/edison/edison.c
create mode 100644 board/intel/edison/edison_start.S
create mode 100644 configs/edison_defconfig
create mode 100644 include/configs/edison.h
--
2.11.0
next reply other threads:[~2017-07-05 20:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-05 20:56 Andy Shevchenko [this message]
2017-07-05 20:56 ` [U-Boot] [PATCH v2 1/3] x86: Add dma-mapping.h to architectural code Andy Shevchenko
2017-07-06 4:07 ` Bin Meng
2017-07-07 3:59 ` Simon Glass
2017-07-22 5:16 ` Bin Meng
2017-07-05 20:56 ` [U-Boot] [PATCH v2 2/3] x86: Add Intel Tangier support Andy Shevchenko
2017-07-06 4:07 ` Bin Meng
2017-07-05 20:56 ` [U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files Andy Shevchenko
2017-07-06 4:07 ` Bin Meng
2017-07-06 9:44 ` Andy Shevchenko
2017-07-06 11:28 ` Andy Shevchenko
2017-07-06 11:33 ` Felipe Balbi
2017-07-06 12:08 ` Bin Meng
2017-07-06 12:07 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170705205628.52620-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox