From: Miquel RAYNAL <miquel.raynal@free-electrons.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Ethernet not functional on i.MX6DL Sabre Auto
Date: Wed, 12 Jul 2017 21:21:36 +0200 [thread overview]
Message-ID: <20170712212136.542ea690@xps13> (raw)
Hi,
I am using a Sabre Auto board with an i.MX6 Dual Lite.
When I compile U-boot with defconfig file mx6dlsabreauto_defconfig, the
network is not functionnal. Only the orange LED on the RJ45 port is
blinking and dhcp requests never end. In menuconfig I saw numerous
unselected options that I guess should be enabled. But event with that,
I could not get through:
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_FEC_MXC=y
The issue is present in v2017.05 and v2017.07 (did not tried previous
versions). Any idea of what could possibly be wrong ?
Boot log follows.
Thank you,
Miquèl
U-Boot 2017.07-dirty (Jul 12 2017 - 16:12:17 +0200)
CPU: Freescale i.MX6DL rev1.1 at 792MHz
CPU: Automotive temperature grade (-40C to 125C) at 44C
Reset cause: POR
Board: MX6Q-Sabreauto revA
I2C: ready
DRAM: 2 GiB
PMIC: PFUZE100 ID=0x10
Flash: 32 MiB
NAND: 256 MiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
No panel detected: default to Hannstar-XGA
Display: Hannstar-XGA (1024x768)
In: serial
Out: serial
Err: serial
Net: FEC [PRIME]
Hit any key to stop autoboot: 0
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17
Retry time exceeded; starting again
--
Miquel Raynal, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next reply other threads:[~2017-07-12 19:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-12 19:21 Miquel RAYNAL [this message]
2017-07-12 19:52 ` [U-Boot] Ethernet not functional on i.MX6DL Sabre Auto Fabio Estevam
2017-07-12 20:17 ` Fabio Estevam
2017-07-13 6:34 ` Miquel RAYNAL
2017-07-13 14:07 ` Fabio Estevam
2017-07-13 14:40 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170712212136.542ea690@xps13 \
--to=miquel.raynal@free-electrons.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox