From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 06/12] x86: Add defconfig for theadorable-x86-conga with PCIe x4 blobs
Date: Mon, 17 Jul 2017 16:03:23 +0200 [thread overview]
Message-ID: <20170717140329.8199-6-sr@denx.de> (raw)
In-Reply-To: <20170717140329.8199-1-sr@denx.de>
This defconfig uses the PCIe x4 binary blobs from the congatec BIOS.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
---
...eadorable-x86-conga-qa3-e3845-pcie-x4_defconfig | 78 ++++++++++++++++++++++
1 file changed, 78 insertions(+)
create mode 100644 configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
new file mode 100644
index 0000000000..27cdec3985
--- /dev/null
+++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
@@ -0,0 +1,78 @@
+CONFIG_X86=y
+CONFIG_VENDOR_CONGATEC=y
+CONFIG_TARGET_THEADORABLE_X86_CONGA_QA3_E3845=y
+CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
+CONFIG_INTERNAL_UART=y
+CONFIG_HAVE_INTEL_ME=y
+CONFIG_FLASH_DESCRIPTOR_FILE="descriptor-pcie-x4.bin"
+CONFIG_ENABLE_MRC_CACHE=y
+CONFIG_SMP=y
+CONFIG_HAVE_VGA_BIOS=y
+CONFIG_VGA_BIOS_ADDR=0xfffa0000
+CONFIG_GENERATE_PIRQ_TABLE=y
+CONFIG_GENERATE_MP_TABLE=y
+CONFIG_GENERATE_ACPI_TABLE=y
+CONFIG_SEABIOS=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_BOOTSTAGE=y
+CONFIG_BOOTSTAGE_REPORT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_ARCH_MISC_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_BOOTSTAGE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CPU=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_INTEL=y
+CONFIG_WINBOND_W83627=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_DM_PCI=y
+CONFIG_DM_RTC=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0x3f8
+CONFIG_DEBUG_UART_CLOCK=1843200
+CONFIG_SYS_NS16550=y
+CONFIG_ICH_SPI=y
+CONFIG_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_VESA=y
+CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
+CONFIG_FRAMEBUFFER_VESA_MODE_114=y
+CONFIG_CONSOLE_SCROLL_LINES=5
+CONFIG_USE_PRIVATE_LIBGCC=y
--
2.13.3
next prev parent reply other threads:[~2017-07-17 14:03 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-17 14:03 [U-Boot] [PATCH 01/12] x86: theadorable-x86-dfi-bt700: Add Micron SPI support and move VIDEO blob Stefan Roese
2017-07-17 14:03 ` [U-Boot] [PATCH 02/12] x86: dfi: Add option to select different config headers for baseboards Stefan Roese
2017-07-18 1:14 ` Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 03/12] x86: conga: " Stefan Roese
2017-07-18 1:14 ` Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 04/12] x86: theadorable-x86: Add header file for common defines and env Stefan Roese
2017-07-18 1:14 ` Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 05/12] x86: conga-qeval20-qa3-e3845: Select CONFIG_BOARD_LATE_INIT Stefan Roese
2017-07-18 1:14 ` Bin Meng
2017-07-17 14:03 ` Stefan Roese [this message]
2017-07-18 1:14 ` [U-Boot] [PATCH 06/12] x86: Add defconfig for theadorable-x86-conga with PCIe x4 blobs Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 07/12] x86: theadorable-x86-conga-qa3-e3845_defconfig: Misc defconfig updates Stefan Roese
2017-07-18 1:15 ` Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 08/12] x86: theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig: " Stefan Roese
2017-07-18 1:15 ` Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 09/12] x86: dfi-bt700: Add xHCI USB hub reset Stefan Roese
2017-07-18 1:15 ` Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 10/12] x86: dfi-bt700.dtsi: Enable xHCI and add GPIO for the xHCI HUB reset Stefan Roese
2017-07-18 1:15 ` Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 11/12] x86: conga-qeval20-qa3-e3845.dts: Enable xHCI support in dts Stefan Roese
2017-07-18 1:15 ` Bin Meng
2017-07-17 14:03 ` [U-Boot] [PATCH 12/12] x86: theadorable-x86-xxx_defconfig: Misc defconfig updates Stefan Roese
2017-07-18 1:15 ` Bin Meng
2017-07-18 1:14 ` [U-Boot] [PATCH 01/12] x86: theadorable-x86-dfi-bt700: Add Micron SPI support and move VIDEO blob Bin Meng
2017-07-18 1:21 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170717140329.8199-6-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox