From: Rob Clark <robdclark@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC 08/10] efi_loader: refactor boot device and loaded_image handling
Date: Thu, 27 Jul 2017 17:38:05 -0400 [thread overview]
Message-ID: <20170727213807.7523-9-robdclark@gmail.com> (raw)
In-Reply-To: <20170727213807.7523-1-robdclark@gmail.com>
Get rid of the hacky fake boot-device and duplicate device-path
constructing (which needs to match what efi_disk and efi_net do).
Instead convert over to use efi_device_path helpers to construct
device-paths, and use that to look up the actual boot device.
Also, extract out a helper to plug things in properly to the
loaded_image. In a following patch we'll want to re-use this in
efi_load_image() to handle the case of loading an image from a
file_path.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
cmd/bootefi.c | 163 +++++++++++++-----------------------------
include/efi_loader.h | 3 +
lib/efi_loader/efi_boottime.c | 35 +++++++++
3 files changed, 87 insertions(+), 114 deletions(-)
diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index d20775eccd..5b97958e4d 100644
--- a/cmd/bootefi.c
+++ b/cmd/bootefi.c
@@ -43,76 +43,16 @@ static struct efi_device_path_file_path bootefi_image_path[] = {
}
};
-static struct efi_device_path_file_path bootefi_device_path[] = {
- {
- .dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE,
- .dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH,
- .dp.length = sizeof(bootefi_image_path[0]),
- .str = { 'b','o','o','t','e','f','i' },
- }, {
- .dp.type = DEVICE_PATH_TYPE_END,
- .dp.sub_type = DEVICE_PATH_SUB_TYPE_END,
- .dp.length = sizeof(bootefi_image_path[0]),
- }
-};
-
-/* The EFI loaded_image interface for the image executed via "bootefi" */
-static struct efi_loaded_image loaded_image_info = {
- .device_handle = bootefi_device_path,
- .file_path = bootefi_image_path,
-};
-
-/* The EFI object struct for the image executed via "bootefi" */
-static struct efi_object loaded_image_info_obj = {
- .handle = &loaded_image_info,
- .protocols = {
- {
- /*
- * When asking for the loaded_image interface, just
- * return handle which points to loaded_image_info
- */
- .guid = &efi_guid_loaded_image,
- .protocol_interface = &loaded_image_info,
- },
- {
- /*
- * When asking for the device path interface, return
- * bootefi_device_path
- */
- .guid = &efi_guid_device_path,
- .protocol_interface = bootefi_device_path,
- },
- {
- .guid = &efi_guid_console_control,
- .protocol_interface = (void *) &efi_console_control
- },
- {
- .guid = &efi_guid_device_path_to_text_protocol,
- .protocol_interface = (void *) &efi_device_path_to_text
- },
- },
-};
-
-/* The EFI object struct for the device the "bootefi" image was loaded from */
-static struct efi_object bootefi_device_obj = {
- .handle = bootefi_device_path,
- .protocols = {
- {
- /* When asking for the device path interface, return
- * bootefi_device_path */
- .guid = &efi_guid_device_path,
- .protocol_interface = bootefi_device_path
- }
- },
-};
+/* if we have CONFIG_DM we construct a proper device-path from the
+ * boot device, otherwise fallback to using bootefi_device_path.
+ */
+static struct efi_device_path *bootefi_device_path;
/* Initialize and populate EFI object list */
static void efi_init_obj_list(void)
{
efi_obj_list_initalized = 1;
- list_add_tail(&loaded_image_info_obj.link, &efi_obj_list);
- list_add_tail(&bootefi_device_obj.link, &efi_obj_list);
efi_console_register();
#ifdef CONFIG_PARTITIONS
efi_disk_register();
@@ -121,13 +61,7 @@ static void efi_init_obj_list(void)
efi_gop_register();
#endif
#ifdef CONFIG_NET
- void *nethandle = loaded_image_info.device_handle;
- efi_net_register(&nethandle);
-
- if (!memcmp(bootefi_device_path[0].str, "N\0e\0t", 6))
- loaded_image_info.device_handle = nethandle;
- else
- loaded_image_info.device_handle = bootefi_device_path;
+ efi_net_register();
#endif
#ifdef CONFIG_GENERATE_SMBIOS_TABLE
efi_smbios_register();
@@ -212,12 +146,24 @@ static unsigned long efi_run_in_el2(asmlinkage ulong (*entry)(
*/
static unsigned long do_bootefi_exec(void *efi, void *fdt)
{
+ static struct efi_loaded_image loaded_image_info = {0};
+ static struct efi_object loaded_image_info_obj = {0};
+ ulong ret;
+
ulong (*entry)(void *image_handle, struct efi_system_table *st)
asmlinkage;
ulong fdt_pages, fdt_size, fdt_start, fdt_end;
const efi_guid_t fdt_guid = EFI_FDT_GUID;
bootm_headers_t img = { 0 };
+ /* Initialize and populate EFI object list */
+ if (!efi_obj_list_initalized)
+ efi_init_obj_list();
+
+ efi_setup_loaded_image(&loaded_image_info, &loaded_image_info_obj,
+ bootefi_device_path,
+ (struct efi_device_path *)bootefi_image_path);
+
/*
* gd lives in a fixed register which may get clobbered while we execute
* the payload. So save it here and restore it on every callback entry
@@ -255,10 +201,6 @@ static unsigned long do_bootefi_exec(void *efi, void *fdt)
if (!entry)
return -ENOENT;
- /* Initialize and populate EFI object list */
- if (!efi_obj_list_initalized)
- efi_init_obj_list();
-
/* Call our payload! */
debug("%s:%d Jumping to 0x%lx\n", __func__, __LINE__, (long)entry);
@@ -282,7 +224,12 @@ static unsigned long do_bootefi_exec(void *efi, void *fdt)
}
#endif
- return efi_do_enter(&loaded_image_info, &systab, entry);
+ ret = efi_do_enter(&loaded_image_info, &systab, entry);
+
+ /* image has returned, loaded-image obj goes *poof*: */
+ list_del(&loaded_image_info_obj.link);
+
+ return ret;
}
@@ -344,58 +291,46 @@ U_BOOT_CMD(
bootefi_help_text
);
-void efi_set_bootdev(const char *dev, const char *devnr, const char *path)
+static int parse_partnum(const char *devnr)
{
- __maybe_unused struct blk_desc *desc;
- char devname[32] = { 0 }; /* dp->str is u16[32] long */
- char *colon, *s;
-
-#if defined(CONFIG_BLK) || CONFIG_IS_ENABLED(ISO_PARTITION)
- desc = blk_get_dev(dev, simple_strtol(devnr, NULL, 10));
-#endif
-
-#ifdef CONFIG_BLK
- if (desc) {
- snprintf(devname, sizeof(devname), "%s", desc->bdev->name);
- } else
-#endif
-
- {
- /* Assemble the condensed device name we use in efi_disk.c */
- snprintf(devname, sizeof(devname), "%s%s", dev, devnr);
+ const char *str = strchr(devnr, ':');
+ if (str) {
+ str++;
+ return simple_strtoul(str, NULL, 16);
}
+ return 0;
+}
- colon = strchr(devname, ':');
-
-#if CONFIG_IS_ENABLED(ISO_PARTITION)
- /* For ISOs we create partition block devices */
- if (desc && (desc->type != DEV_TYPE_UNKNOWN) &&
- (desc->part_type == PART_TYPE_ISO)) {
- if (!colon)
- snprintf(devname, sizeof(devname), "%s:1", devname);
+void efi_set_bootdev(const char *dev, const char *devnr, const char *path)
+{
+ char filename[32] = { 0 }; /* dp->str is u16[32] long */
+ char *s;
- colon = NULL;
- }
-#endif
+ if (strcmp(dev, "Net")) {
+ static struct blk_desc *desc;
+ static int part;
- if (colon)
- *colon = '\0';
+ desc = blk_get_dev(dev, simple_strtol(devnr, NULL, 10));
+ part = parse_partnum(devnr);
- /* Patch bootefi_device_path to the target device */
- memset(bootefi_device_path[0].str, 0, sizeof(bootefi_device_path[0].str));
- ascii2unicode(bootefi_device_path[0].str, devname);
+ bootefi_device_path = efi_dp_from_part(desc, part);
+ } else {
+#ifdef CONFIG_NET
+ bootefi_device_path = efi_dp_from_eth();
+#endif
+ }
/* Patch bootefi_image_path to the target file path */
memset(bootefi_image_path[0].str, 0, sizeof(bootefi_image_path[0].str));
if (strcmp(dev, "Net")) {
/* Add leading / to fs paths, because they're absolute */
- snprintf(devname, sizeof(devname), "/%s", path);
+ snprintf(filename, sizeof(filename), "/%s", path);
} else {
- snprintf(devname, sizeof(devname), "%s", path);
+ snprintf(filename, sizeof(filename), "%s", path);
}
/* DOS style file path: */
- s = devname;
+ s = filename;
while ((s = strchr(s, '/')))
*s++ = '\\';
- ascii2unicode(bootefi_image_path[0].str, devname);
+ ascii2unicode(bootefi_image_path[0].str, filename);
}
diff --git a/include/efi_loader.h b/include/efi_loader.h
index c5cc15fc4c..208beffa78 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -201,6 +201,9 @@ efi_status_t efi_install_configuration_table(const efi_guid_t *guid, void *table
efi_status_t efi_get_protocol(struct efi_object *efiobj,
struct efi_handler *handler,
void **protocol_interface);
+void efi_setup_loaded_image(struct efi_loaded_image *info, struct efi_object *obj,
+ struct efi_device_path *device_path,
+ struct efi_device_path *file_path);
#ifdef CONFIG_EFI_LOADER_BOUNCE_BUFFER
extern void *efi_bounce_buffer;
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index 9ce550f5d2..aa342670c2 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -714,6 +714,41 @@ static efi_status_t EFIAPI efi_install_configuration_table_ext(efi_guid_t *guid,
return EFI_EXIT(efi_install_configuration_table(guid, table));
}
+/* Initialize a loaded_image_info + loaded_image_info object with correct
+ * protocols, boot-device, etc.
+ */
+void efi_setup_loaded_image(struct efi_loaded_image *info, struct efi_object *obj,
+ struct efi_device_path *device_path,
+ struct efi_device_path *file_path)
+{
+ obj->handle = info;
+
+ /*
+ * When asking for the device path interface, return
+ * bootefi_device_path
+ */
+ obj->protocols[0].guid = &efi_guid_device_path;
+ obj->protocols[0].protocol_interface = device_path;
+
+ /*
+ * When asking for the loaded_image interface, just
+ * return handle which points to loaded_image_info
+ */
+ obj->protocols[1].guid = &efi_guid_loaded_image;
+ obj->protocols[1].protocol_interface = info;
+
+ obj->protocols[2].guid = &efi_guid_console_control;
+ obj->protocols[2].protocol_interface = (void *)&efi_console_control;
+
+ obj->protocols[3].guid = &efi_guid_device_path_to_text_protocol;
+ obj->protocols[3].protocol_interface = (void *)&efi_guid_device_path_to_text_protocol;
+
+ info->file_path = file_path;
+ info->device_handle = efi_dp_find_obj(device_path);
+
+ list_add_tail(&obj->link, &efi_obj_list);
+}
+
static efi_status_t EFIAPI efi_load_image(bool boot_policy,
efi_handle_t parent_image,
struct efi_device_path *file_path,
--
2.13.0
next prev parent reply other threads:[~2017-07-27 21:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-27 21:37 [U-Boot] [RFC 00/10] efi_loader: bunch of EFI work for distro boot Rob Clark
2017-07-27 21:37 ` [U-Boot] [RFC 01/10] efi_loader: add back optional efi_handler::open() Rob Clark
2017-07-27 21:37 ` [U-Boot] [RFC 02/10] efi: fill in disk signature bits of hard drive device path Rob Clark
2017-07-27 21:38 ` [U-Boot] [RFC 03/10] efi: add some more device path structures Rob Clark
2017-07-27 21:38 ` [U-Boot] [RFC 04/10] fs: add fs_readdir() Rob Clark
2017-07-27 21:38 ` [U-Boot] [RFC 05/10] efi_loader: add device-path utils Rob Clark
2017-07-27 21:38 ` [U-Boot] [RFC 06/10] efi_loader: use proper device-paths for partitions Rob Clark
2017-07-27 21:38 ` [U-Boot] [RFC 07/10] efi_loader: use proper device-paths for net Rob Clark
2017-07-27 21:38 ` Rob Clark [this message]
2017-07-27 21:38 ` [U-Boot] [RFC 09/10] efi_loader: add file/filesys support Rob Clark
2017-07-27 21:38 ` [U-Boot] [RFC 10/10] efi_loader: support load_image() from a file-path Rob Clark
2017-07-27 22:50 ` Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170727213807.7523-9-robdclark@gmail.com \
--to=robdclark@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox