[U-Boot] [PATCH v0 13/20] efi_loader: use proper device-paths for partitions

[Peter Jones <pjones@redhat.com>]

On Fri, Aug 04, 2017 at 10:41:32PM +0200, Mark Kettenis wrote:
[...]
> ..and what you're sketching out here should work with recent enough
> versions of our bootloader.
> 
> However, to me having an ACPI Device Path component in there doesn't
> make much sense on a board without ACPI.  It certainly doesn't help
> mapping a boot path back to an actual hardware device.  Wouldn't it be
> more logical to a Hardware Device Path there instead?  In particular a
> Memory Mapped Device Path would make a lot of sense as the start
> address would make it fairly easy to do the mapping.

It was really an arbitrary choice, as Rob said.  I don't think there's
any big problem with changing it, but I'm not sure Memory Mapped is
correct.  As I read it, StartingAddress and EndingAddress in that class
should be pointing at some window into a memory map entry that is
holding the thing described /by/ the node, but there's really nothing
here.  It's just an arbitrary root node.

If we want something other than the ACPI path I made up, we should
probably just go with a Vendor Specific Device Path with a constant
well-known GUID of our choosing.  e61d73b9-a384-4acc-aeab-82e828f3628b,
say.

-- 
        Peter