* [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters
@ 2017-10-06 7:12 Stefan Roese
2017-10-06 7:12 ` [U-Boot] [PATCH 2/3] x86: theadorable-x86-common: Move "-generic" into kernel-ver variable Stefan Roese
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Stefan Roese @ 2017-10-06 7:12 UTC (permalink / raw)
To: u-boot
This is needed for the PCIe hotplug to work correctly on some boards.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
---
include/configs/theadorable-x86-common.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h
index 238056a65f..7621385fa2 100644
--- a/include/configs/theadorable-x86-common.h
+++ b/include/configs/theadorable-x86-common.h
@@ -58,7 +58,8 @@
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addmisc=setenv bootargs ${bootargs} " \
"intel-spi.writeable=1 vmalloc=300M " \
- "pci=realloc=on,hpmemsize=0x12000000\0" \
+ "pci=realloc=on,hpmemsize=0x12000000," \
+ "hpmemprefsize=0,hpiosize=0\0" \
"bootcmd=if env exists recovery_status;" \
"then run swupdate;" \
"else run yocto_boot;run swupdate;" \
--
2.14.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [U-Boot] [PATCH 2/3] x86: theadorable-x86-common: Move "-generic" into kernel-ver variable
2017-10-06 7:12 [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters Stefan Roese
@ 2017-10-06 7:12 ` Stefan Roese
2017-10-07 3:59 ` Bin Meng
2017-10-06 7:12 ` [U-Boot] [PATCH 3/3] x86: theadorable-x86-xxx_defconfig: Enable setexpr command Stefan Roese
2017-10-07 3:59 ` [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters Bin Meng
2 siblings, 1 reply; 9+ messages in thread
From: Stefan Roese @ 2017-10-06 7:12 UTC (permalink / raw)
To: u-boot
This enables the easier usage of "-custom" kernel versions as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
---
include/configs/theadorable-x86-common.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h
index 7621385fa2..c20803c535 100644
--- a/include/configs/theadorable-x86-common.h
+++ b/include/configs/theadorable-x86-common.h
@@ -46,7 +46,7 @@
"yocto_tty=" __stringify(DEF_ENV_YOCTO_TTY) "\0" \
"start_eth=if test -n \"${eth_init}\";" \
"then run eth_init;else sleep 0;fi\0" \
- "kernel-ver=4.8.0-54\0" \
+ "kernel-ver=4.8.0-54-generic\0" \
"boot=zboot 03000000 0 04000000 ${filesize}\0" \
"mtdparts=mtdparts=intel-spi:4k(descriptor),7084k(me)," \
"8k(env1),8k(env2),64k(mrc),640k(u-boot)," \
@@ -69,9 +69,9 @@
"ubuntu_args_quiet=setenv bootargs " \
"root=/dev/sda${ubuntu_part} ro quiet\0" \
"ubuntu_load=load scsi 0:${ubuntu_part} 03000000 " \
- "/boot/vmlinuz-${kernel-ver}-generic;" \
+ "/boot/vmlinuz-${kernel-ver};" \
"load scsi 0:${ubuntu_part} 04000000 " \
- "/boot/initrd.img-${kernel-ver}-generic\0" \
+ "/boot/initrd.img-${kernel-ver}\0" \
"ubuntu_boot=run ubuntu_args_quiet addmtd addmisc " \
"ubuntu_load boot\0" \
"ubuntu_boot_console=run ubuntu_args addtty_ubuntu " \
@@ -80,7 +80,7 @@
"net_boot=run start_eth net_args addtty_yocto addmtd addmisc;" \
"tftp 03000000 ${tftpdir}/bzImage;" \
"load scsi 0:${ubuntu_part} 04000000 " \
- "/boot/initrd.img-${kernel-ver}-generic;" \
+ "/boot/initrd.img-${kernel-ver};" \
"run boot\0" \
"yocto_args=setenv bootargs root=/dev/sda${yocto_part} " \
"panic=1\0" \
--
2.14.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [U-Boot] [PATCH 2/3] x86: theadorable-x86-common: Move "-generic" into kernel-ver variable
2017-10-06 7:12 ` [U-Boot] [PATCH 2/3] x86: theadorable-x86-common: Move "-generic" into kernel-ver variable Stefan Roese
@ 2017-10-07 3:59 ` Bin Meng
2017-10-07 4:04 ` Bin Meng
0 siblings, 1 reply; 9+ messages in thread
From: Bin Meng @ 2017-10-07 3:59 UTC (permalink / raw)
To: u-boot
On Fri, Oct 6, 2017 at 3:12 PM, Stefan Roese <sr@denx.de> wrote:
> This enables the easier usage of "-custom" kernel versions as well.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Bin Meng <bmeng.cn@gmail.com>
> ---
> include/configs/theadorable-x86-common.h | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 2/3] x86: theadorable-x86-common: Move "-generic" into kernel-ver variable
2017-10-07 3:59 ` Bin Meng
@ 2017-10-07 4:04 ` Bin Meng
0 siblings, 0 replies; 9+ messages in thread
From: Bin Meng @ 2017-10-07 4:04 UTC (permalink / raw)
To: u-boot
On Sat, Oct 7, 2017 at 11:59 AM, Bin Meng <bmeng.cn@gmail.com> wrote:
> On Fri, Oct 6, 2017 at 3:12 PM, Stefan Roese <sr@denx.de> wrote:
>> This enables the easier usage of "-custom" kernel versions as well.
>>
>> Signed-off-by: Stefan Roese <sr@denx.de>
>> Cc: Bin Meng <bmeng.cn@gmail.com>
>> ---
>> include/configs/theadorable-x86-common.h | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
applied to u-boot-x86, thanks!
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 3/3] x86: theadorable-x86-xxx_defconfig: Enable setexpr command
2017-10-06 7:12 [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters Stefan Roese
2017-10-06 7:12 ` [U-Boot] [PATCH 2/3] x86: theadorable-x86-common: Move "-generic" into kernel-ver variable Stefan Roese
@ 2017-10-06 7:12 ` Stefan Roese
2017-10-07 3:59 ` Bin Meng
2017-10-07 3:59 ` [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters Bin Meng
2 siblings, 1 reply; 9+ messages in thread
From: Stefan Roese @ 2017-10-06 7:12 UTC (permalink / raw)
To: u-boot
The setexpr command is useful for scripting, lets enable it for all
x86 based theadorable platforms.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
---
configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig | 1 -
configs/theadorable-x86-conga-qa3-e3845_defconfig | 1 -
configs/theadorable-x86-dfi-bt700_defconfig | 1 -
3 files changed, 3 deletions(-)
diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
index 1888f08928..344a8f25c2 100644
--- a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
+++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
@@ -27,7 +27,6 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
diff --git a/configs/theadorable-x86-conga-qa3-e3845_defconfig b/configs/theadorable-x86-conga-qa3-e3845_defconfig
index 4c9492cf1f..84a92c54da 100644
--- a/configs/theadorable-x86-conga-qa3-e3845_defconfig
+++ b/configs/theadorable-x86-conga-qa3-e3845_defconfig
@@ -26,7 +26,6 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
diff --git a/configs/theadorable-x86-dfi-bt700_defconfig b/configs/theadorable-x86-dfi-bt700_defconfig
index 348d917b3b..d42798e8e9 100644
--- a/configs/theadorable-x86-dfi-bt700_defconfig
+++ b/configs/theadorable-x86-dfi-bt700_defconfig
@@ -25,7 +25,6 @@ CONFIG_CMD_PART=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
--
2.14.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 3/3] x86: theadorable-x86-xxx_defconfig: Enable setexpr command
2017-10-06 7:12 ` [U-Boot] [PATCH 3/3] x86: theadorable-x86-xxx_defconfig: Enable setexpr command Stefan Roese
@ 2017-10-07 3:59 ` Bin Meng
2017-10-07 4:04 ` Bin Meng
0 siblings, 1 reply; 9+ messages in thread
From: Bin Meng @ 2017-10-07 3:59 UTC (permalink / raw)
To: u-boot
On Fri, Oct 6, 2017 at 3:12 PM, Stefan Roese <sr@denx.de> wrote:
> The setexpr command is useful for scripting, lets enable it for all
> x86 based theadorable platforms.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Bin Meng <bmeng.cn@gmail.com>
> ---
> configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig | 1 -
> configs/theadorable-x86-conga-qa3-e3845_defconfig | 1 -
> configs/theadorable-x86-dfi-bt700_defconfig | 1 -
> 3 files changed, 3 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 3/3] x86: theadorable-x86-xxx_defconfig: Enable setexpr command
2017-10-07 3:59 ` Bin Meng
@ 2017-10-07 4:04 ` Bin Meng
0 siblings, 0 replies; 9+ messages in thread
From: Bin Meng @ 2017-10-07 4:04 UTC (permalink / raw)
To: u-boot
On Sat, Oct 7, 2017 at 11:59 AM, Bin Meng <bmeng.cn@gmail.com> wrote:
> On Fri, Oct 6, 2017 at 3:12 PM, Stefan Roese <sr@denx.de> wrote:
>> The setexpr command is useful for scripting, lets enable it for all
>> x86 based theadorable platforms.
>>
>> Signed-off-by: Stefan Roese <sr@denx.de>
>> Cc: Bin Meng <bmeng.cn@gmail.com>
>> ---
>> configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig | 1 -
>> configs/theadorable-x86-conga-qa3-e3845_defconfig | 1 -
>> configs/theadorable-x86-dfi-bt700_defconfig | 1 -
>> 3 files changed, 3 deletions(-)
>>
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
applied to u-boot-x86, thanks!
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters
2017-10-06 7:12 [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters Stefan Roese
2017-10-06 7:12 ` [U-Boot] [PATCH 2/3] x86: theadorable-x86-common: Move "-generic" into kernel-ver variable Stefan Roese
2017-10-06 7:12 ` [U-Boot] [PATCH 3/3] x86: theadorable-x86-xxx_defconfig: Enable setexpr command Stefan Roese
@ 2017-10-07 3:59 ` Bin Meng
2017-10-07 4:04 ` Bin Meng
2 siblings, 1 reply; 9+ messages in thread
From: Bin Meng @ 2017-10-07 3:59 UTC (permalink / raw)
To: u-boot
On Fri, Oct 6, 2017 at 3:12 PM, Stefan Roese <sr@denx.de> wrote:
> This is needed for the PCIe hotplug to work correctly on some boards.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Bin Meng <bmeng.cn@gmail.com>
> ---
> include/configs/theadorable-x86-common.h | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters
2017-10-07 3:59 ` [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters Bin Meng
@ 2017-10-07 4:04 ` Bin Meng
0 siblings, 0 replies; 9+ messages in thread
From: Bin Meng @ 2017-10-07 4:04 UTC (permalink / raw)
To: u-boot
On Sat, Oct 7, 2017 at 11:59 AM, Bin Meng <bmeng.cn@gmail.com> wrote:
> On Fri, Oct 6, 2017 at 3:12 PM, Stefan Roese <sr@denx.de> wrote:
>> This is needed for the PCIe hotplug to work correctly on some boards.
>>
>> Signed-off-by: Stefan Roese <sr@denx.de>
>> Cc: Bin Meng <bmeng.cn@gmail.com>
>> ---
>> include/configs/theadorable-x86-common.h | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
applied to u-boot-x86, thanks!
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-10-07 4:04 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-06 7:12 [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters Stefan Roese
2017-10-06 7:12 ` [U-Boot] [PATCH 2/3] x86: theadorable-x86-common: Move "-generic" into kernel-ver variable Stefan Roese
2017-10-07 3:59 ` Bin Meng
2017-10-07 4:04 ` Bin Meng
2017-10-06 7:12 ` [U-Boot] [PATCH 3/3] x86: theadorable-x86-xxx_defconfig: Enable setexpr command Stefan Roese
2017-10-07 3:59 ` Bin Meng
2017-10-07 4:04 ` Bin Meng
2017-10-07 3:59 ` [U-Boot] [PATCH 1/3] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters Bin Meng
2017-10-07 4:04 ` Bin Meng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox