From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Fri, 13 Oct 2017 10:16:12 +0200 Subject: [U-Boot] fsl_esdhc driver is broken with DM In-Reply-To: <20171011184138.GO12015@bill-the-cat> References: <20171001144930.GG3503@bill-the-cat> <20171011184138.GO12015@bill-the-cat> Message-ID: <20171013101612.1b7c351e@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, 11 Oct 2017 14:41:38 -0400 Tom Rini wrote: > On Wed, Oct 11, 2017 at 01:09:04PM -0300, Fabio Estevam wrote: > > On Wed, Oct 11, 2017 at 1:06 PM, Jagan Teki > > wrote: > > > > > I've observed here, u-boot is unable to relocate. So when I build > > > U-Boot with removing u-boot,dm-spl from dts it works fine, but > > > idea here I need to use SPL_OF_CONTROL and it is not related to > > > DM_MMC I suppose. > > > > Ok, a different bug then. > > > > I was wondering if we could have some automated boot tests in > > U-Boot mainline? > > > > Something like https://kernelci.org/ for U-Boot? > > The problem(s) there are related to lack of hardware support for > testing firmware in a CI type environment. For example, I do > test/py/test.py on real hardware before every push cycle. The > problem for iMX in this case at least is that I haven't seen (nor had > a chance to come up with) the scripting to update u-boot from within > u-boot, to catch the kind of failures that we don't see when doing > the USB recovery boot method. I can test sabrelite via u-boot.imx > (and in theory I could test my hummingboard with SPL, but my quick > pass at enabling USB > gadget support there didn't seem to work). If possible you can update SPL and u-boot.img via TFTP.... > > I would very much welcome more labs running tests however. There's > already a few, but I guess the gap we see right here and now is that > there's none for iMX. > There is some ongoing work to provide such facility..... for imx6 boards. I will keep you informed. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: