From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] configs: vf610: increase maximum size and enforce correct limit
Date: Mon, 30 Oct 2017 22:47:56 -0400 [thread overview]
Message-ID: <20171031024756.GD4635@bill-the-cat> (raw)
In-Reply-To: <e6cf519e06614f9bf774d85a4a85f209@agner.ch>
On Mon, Oct 30, 2017 at 09:59:04AM +0100, Stefan Agner wrote:
> Hi Tom, Stefano,
>
> Any chance to get this still into 2017.11? It allows to use 2017.11 on
> my board...
Stefano, this is your call, thanks!
>
> --
> Stefan
>
> On 2017-10-17 13:59, Stefan Agner wrote:
> > From: Stefan Agner <stefan.agner@toradex.com>
> >
> > On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB.
> > Currently 32KiB is reserved for the IMX header. However, this is
> > not reflected in the size limit. In v2017.11-rc2 the actual size
> > limit (512KiB-32KiB) has been reached for Colibri VF61, which
> > lead to a successful build of U-Boot but not a working binary.
> >
> > The IMX header is much smaller than 32KiB, typically around 1KiB.
> > Decrease the reserved size to 4KiB and specify the correct U-Boot
> > size limit. Apply this new base address and limit for all Vybrid
> > based boards.
> >
> > Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> > ---
> >
> > include/configs/colibri_vf.h | 4 ++--
> > include/configs/pcm052.h | 4 ++--
> > include/configs/vf610twr.h | 4 ++--
> > 3 files changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> > index 8166aa4afb..bf3bbffe24 100644
> > --- a/include/configs/colibri_vf.h
> > +++ b/include/configs/colibri_vf.h
> > @@ -75,8 +75,8 @@
> > #define CONFIG_FDTADDR 0x84000000
> >
> > /* We boot from the gfxRAM area of the OCRAM. */
> > -#define CONFIG_SYS_TEXT_BASE 0x3f408000
> > -#define CONFIG_BOARD_SIZE_LIMIT 524288
> > +#define CONFIG_SYS_TEXT_BASE 0x3f401000
> > +#define CONFIG_BOARD_SIZE_LIMIT 520192
> >
> > #define SD_BOOTCMD \
> > "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
> > diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
> > index 8144a83db2..060928bd30 100644
> > --- a/include/configs/pcm052.h
> > +++ b/include/configs/pcm052.h
> > @@ -89,8 +89,8 @@
> > #define CONFIG_LOADADDR 0x82000000
> >
> > /* We boot from the gfxRAM area of the OCRAM. */
> > -#define CONFIG_SYS_TEXT_BASE 0x3f408000
> > -#define CONFIG_BOARD_SIZE_LIMIT 524288
> > +#define CONFIG_SYS_TEXT_BASE 0x3f401000
> > +#define CONFIG_BOARD_SIZE_LIMIT 520192
> >
> > /* if no target-specific extra environment settings were defined by the
> > target, define an empty one */
> > diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
> > index 3430f27c40..ddfcd6f618 100644
> > --- a/include/configs/vf610twr.h
> > +++ b/include/configs/vf610twr.h
> > @@ -79,8 +79,8 @@
> > #define CONFIG_SYS_LOAD_ADDR 0x82000000
> >
> > /* We boot from the gfxRAM area of the OCRAM. */
> > -#define CONFIG_SYS_TEXT_BASE 0x3f408000
> > -#define CONFIG_BOARD_SIZE_LIMIT 524288
> > +#define CONFIG_SYS_TEXT_BASE 0x3f401000
> > +#define CONFIG_BOARD_SIZE_LIMIT 520192
> >
> > /*
> > * We do have 128MB of memory on the Vybrid Tower board. Leave the last
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171030/72b37f2f/attachment.sig>
next prev parent reply other threads:[~2017-10-31 2:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-17 11:59 [U-Boot] [PATCH] configs: vf610: increase maximum size and enforce correct limit Stefan Agner
2017-10-30 8:59 ` Stefan Agner
2017-10-31 2:47 ` Tom Rini [this message]
2017-10-31 9:59 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171031024756.GD4635@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox