From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Mon, 30 Oct 2017 22:47:56 -0400 Subject: [U-Boot] [PATCH] configs: vf610: increase maximum size and enforce correct limit In-Reply-To: References: <20171017115919.19570-1-stefan@agner.ch> Message-ID: <20171031024756.GD4635@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Oct 30, 2017 at 09:59:04AM +0100, Stefan Agner wrote: > Hi Tom, Stefano, > > Any chance to get this still into 2017.11? It allows to use 2017.11 on > my board... Stefano, this is your call, thanks! > > -- > Stefan > > On 2017-10-17 13:59, Stefan Agner wrote: > > From: Stefan Agner > > > > On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. > > Currently 32KiB is reserved for the IMX header. However, this is > > not reflected in the size limit. In v2017.11-rc2 the actual size > > limit (512KiB-32KiB) has been reached for Colibri VF61, which > > lead to a successful build of U-Boot but not a working binary. > > > > The IMX header is much smaller than 32KiB, typically around 1KiB. > > Decrease the reserved size to 4KiB and specify the correct U-Boot > > size limit. Apply this new base address and limit for all Vybrid > > based boards. > > > > Signed-off-by: Stefan Agner > > --- > > > > include/configs/colibri_vf.h | 4 ++-- > > include/configs/pcm052.h | 4 ++-- > > include/configs/vf610twr.h | 4 ++-- > > 3 files changed, 6 insertions(+), 6 deletions(-) > > > > diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h > > index 8166aa4afb..bf3bbffe24 100644 > > --- a/include/configs/colibri_vf.h > > +++ b/include/configs/colibri_vf.h > > @@ -75,8 +75,8 @@ > > #define CONFIG_FDTADDR 0x84000000 > > > > /* We boot from the gfxRAM area of the OCRAM. */ > > -#define CONFIG_SYS_TEXT_BASE 0x3f408000 > > -#define CONFIG_BOARD_SIZE_LIMIT 524288 > > +#define CONFIG_SYS_TEXT_BASE 0x3f401000 > > +#define CONFIG_BOARD_SIZE_LIMIT 520192 > > > > #define SD_BOOTCMD \ > > "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ > > diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h > > index 8144a83db2..060928bd30 100644 > > --- a/include/configs/pcm052.h > > +++ b/include/configs/pcm052.h > > @@ -89,8 +89,8 @@ > > #define CONFIG_LOADADDR 0x82000000 > > > > /* We boot from the gfxRAM area of the OCRAM. */ > > -#define CONFIG_SYS_TEXT_BASE 0x3f408000 > > -#define CONFIG_BOARD_SIZE_LIMIT 524288 > > +#define CONFIG_SYS_TEXT_BASE 0x3f401000 > > +#define CONFIG_BOARD_SIZE_LIMIT 520192 > > > > /* if no target-specific extra environment settings were defined by the > > target, define an empty one */ > > diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h > > index 3430f27c40..ddfcd6f618 100644 > > --- a/include/configs/vf610twr.h > > +++ b/include/configs/vf610twr.h > > @@ -79,8 +79,8 @@ > > #define CONFIG_SYS_LOAD_ADDR 0x82000000 > > > > /* We boot from the gfxRAM area of the OCRAM. */ > > -#define CONFIG_SYS_TEXT_BASE 0x3f408000 > > -#define CONFIG_BOARD_SIZE_LIMIT 524288 > > +#define CONFIG_SYS_TEXT_BASE 0x3f401000 > > +#define CONFIG_BOARD_SIZE_LIMIT 520192 > > > > /* > > * We do have 128MB of memory on the Vybrid Tower board. Leave the last > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: