From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Thu, 9 Nov 2017 11:19:27 +0100 Subject: [U-Boot] [PATCH v5 0/8] Add support for GE PPD In-Reply-To: <1510155316-24596-1-git-send-email-martyn.welch@collabora.co.uk> References: <1510155316-24596-1-git-send-email-martyn.welch@collabora.co.uk> Message-ID: <20171109111927.64ff75e8@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Martyn, > *** Resend due to previous use of unsubscribed email address *** Just a small remark. You may consider using patman to get the list of u-boot community peers to be CC'ed for your patch. Or at least look for a custodian (in MAINTAINERS) responsible to IMX (NXP) SoC part of u-boot (in this case Stefano Babic or Fabio Estevam). The problem with sending code only to u-boot ML is that it may be overlooked by people, who are the best candidates to review it. > > This series adds support for the GE PPD. The initial patches in this > series resolve issues found during development and testing, extend > existing support and add new support for devices in the PPD. The final > patch in the series adds the board support for the PPD. > > Ian Ray (2): > ext4: recover from filesystem corruption when reading > bootcount: add support for bootcounter on EXT filesystem > > Martyn Welch (3): > pwm: imx: Enable PWM support on i.MX53 > arm: mx5: Add more register definitions > board: ge: make VPD code common > > Nandor Han (2): > imx: mxc_i2c: tweak the i2c transfer method > rtc: add support for s35392a > > Peter Senna Tschudin (1): > mx53: Add Board support for GE PPD > > README | 7 + > arch/arm/include/asm/arch-mx5/crm_regs.h | 8 + > arch/arm/include/asm/arch-mx5/imx-regs.h | 50 ++++ > arch/arm/mach-imx/mx5/Kconfig | 7 + > board/ge/bx50v3/Makefile | 2 +- > board/ge/bx50v3/bx50v3.c | 2 +- > board/ge/bx50v3/vpd_reader.c | 228 --------------- > board/ge/bx50v3/vpd_reader.h | 25 -- > board/ge/common/Makefile | 7 + > board/ge/common/vpd_reader.c | 197 +++++++++++++ > board/ge/common/vpd_reader.h | 17 ++ > board/ge/mx53ppd/Kconfig | 17 ++ > board/ge/mx53ppd/MAINTAINERS | 7 + > board/ge/mx53ppd/Makefile | 12 + > board/ge/mx53ppd/imximage.cfg | 87 ++++++ > board/ge/mx53ppd/mx53ppd.c | 457 > +++++++++++++++++++++++++++++++ > board/ge/mx53ppd/mx53ppd_video.c | 135 +++++++++ > board/ge/mx53ppd/ppd_gpio.h | 96 +++++++ > configs/mx53ppd_defconfig | 39 +++ > drivers/Kconfig | 2 + > drivers/bootcount/Kconfig | 58 ++++ > drivers/bootcount/Makefile | 1 + > drivers/bootcount/bootcount_ext.c | 62 +++++ > drivers/i2c/mxc_i2c.c | 25 +- > drivers/pwm/pwm-imx-util.c | 2 + > drivers/rtc/Kconfig | 6 + > drivers/rtc/Makefile | 1 + > drivers/rtc/s35392a.c | 365 > ++++++++++++++++++++++++ fs/ext4/ext4_common.c | > 10 + fs/ext4/ext4fs.c | 10 +- > include/configs/mx53ppd.h | 248 +++++++++++++++++ > lib/Kconfig | 3 + 32 files changed, > 1927 insertions(+), 266 deletions(-) delete mode 100644 > board/ge/bx50v3/vpd_reader.c delete mode 100644 > board/ge/bx50v3/vpd_reader.h create mode 100644 > board/ge/common/Makefile create mode 100644 > board/ge/common/vpd_reader.c create mode 100644 > board/ge/common/vpd_reader.h create mode 100644 > board/ge/mx53ppd/Kconfig create mode 100644 > board/ge/mx53ppd/MAINTAINERS create mode 100644 > board/ge/mx53ppd/Makefile create mode 100644 > board/ge/mx53ppd/imximage.cfg create mode 100644 > board/ge/mx53ppd/mx53ppd.c create mode 100644 > board/ge/mx53ppd/mx53ppd_video.c create mode 100644 > board/ge/mx53ppd/ppd_gpio.h create mode 100644 > configs/mx53ppd_defconfig create mode 100644 drivers/bootcount/Kconfig > create mode 100644 drivers/bootcount/bootcount_ext.c > create mode 100644 drivers/rtc/s35392a.c > create mode 100644 include/configs/mx53ppd.h > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: