From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Thu, 23 Nov 2017 17:34:50 +0100 Subject: [U-Boot] uboot xip eim nor In-Reply-To: <8ce4e5ccf3ae4a4c83b74f2b8f28045a@SGPMBX1020.APAC.bosch.com> References: <8ce4e5ccf3ae4a4c83b74f2b8f28045a@SGPMBX1020.APAC.bosch.com> Message-ID: <20171123173450.07a24afb@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 23 Nov 2017 08:53:10 +0000 "Amartya Shreyank (RBEI/ESD2)" wrote: > Hi, > > I am trying to configure uboot for xip from eim nor for a custom > imx6solo board. Can someone suggest what modifications are needed for > this in uboot. I have borrowed configurations from imx6 based boards > and stripped them down to bare minimum. Please look into mccmon6 board port (include/mccmon6.h) - it is imx6q. It uses EIM NOR for booting and storing u-boot/kernel. > > Also, if anyone can explain how do we select the values of the > following configs: CONFIG_SYS_TEXT_BASE > CONFIG_LOADADDR > The nor address starts at 0x0800 0000, if I set the > CONFIG_SYS_TEXT_BASE as nor start address. The load address inside > IVT header is 0x07fff908 which falls outside of NOR region. > > Best regards, > > Shreyank Amartya > RBEI/ESD2 > > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: