[U-Boot] [PATCH 00/13] arm: am57xx: Add support for am574-idk

[U-Boot] [PATCH 00/13] arm: am57xx: Add support for am574-idk

[Lokesh Vutla]

am574x-idk board is similar to am572x-idk with am574x SoC.
This series adds support for this board.

Logs: http://pastebin.ubuntu.com/26207045/

Lokesh Vutla (12):
  arm: emif-common: Add ecc specific emif registers
  arm: emif-common: Add suppport for enabling ECC
  arm: keystone: Move cmd_ddr3 to a common place
  arm: ti: Generalize cmd_ddr3 command
  arm: dra762: Add support for device package identification
  board: ti: am574x-idk: Add epprom support
  board: ti: am574x-idk: Add hw data support
  board: ti: am574x-idk: Add ddr data support
  board: ti: am574x-idk: Update pinmux using latest PMT
  board: ti: am57xx: Enable CMD_DDR3
  ARM: dts: am574x-idk: Add initial support
  env: ti: Select dtb name for dra76x and am574

Tero Kristo (1):
  drivers: dma: ti-edma3: add support for memory fill

 arch/arm/dts/Makefile                              |   1 +
 arch/arm/dts/am572x-idk-common.dtsi                | 100 +++++++
 arch/arm/dts/am572x-idk.dts                        |  93 +------
 arch/arm/dts/am574x-idk.dts                        |  22 ++
 arch/arm/dts/am57xx-commercial-grade.dtsi          |   1 +
 arch/arm/dts/am57xx-industrial-grade.dtsi          |   1 +
 arch/arm/include/asm/arch-omap5/omap.h             |   3 +
 arch/arm/include/asm/arch-omap5/sys_proto.h        |   1 +
 arch/arm/include/asm/emif.h                        |  50 +++-
 arch/arm/include/asm/omap_common.h                 |  15 ++
 arch/arm/include/asm/ti-common/ti-edma3.h          |   2 +
 arch/arm/mach-keystone/Kconfig                     |   4 +
 arch/arm/mach-keystone/Makefile                    |   1 -
 arch/arm/mach-keystone/include/mach/hardware.h     |   1 +
 arch/arm/mach-omap2/emif-common.c                  |  95 ++++++-
 arch/arm/mach-omap2/hwinit-common.c                |  33 ++-
 arch/arm/mach-omap2/omap5/Kconfig                  |   1 +
 arch/arm/mach-omap2/omap5/hw_data.c                |   4 +
 arch/arm/mach-omap2/omap5/hwinit.c                 |  21 ++
 arch/arm/mach-omap2/omap5/sdram.c                  |   4 +
 board/ti/am57xx/board.c                            |  64 ++++-
 board/ti/am57xx/mux_data.h                         | 299 +++++++++++++++++++++
 board/ti/common/Kconfig                            |   7 +
 board/ti/common/Makefile                           |   3 +
 .../mach-keystone => board/ti/common}/cmd_ddr3.c   | 179 +++++++++---
 board/ti/dra7xx/evm.c                              |  17 +-
 configs/am57xx_evm_defconfig                       |   2 +-
 configs/am57xx_hs_evm_defconfig                    |   2 +-
 drivers/dma/ti-edma3.c                             |  55 +++-
 include/environment/ti/boot.h                      |   4 +-
 30 files changed, 927 insertions(+), 158 deletions(-)
 create mode 100644 arch/arm/dts/am572x-idk-common.dtsi
 create mode 100644 arch/arm/dts/am574x-idk.dts
 rename {arch/arm/mach-keystone => board/ti/common}/cmd_ddr3.c (54%)

-- 
2.15.1

[U-Boot] [PATCH 01/13] drivers: dma: ti-edma3: add support for memory fill

[Lokesh Vutla]

From: Tero Kristo <t-kristo@ti.com>

Add support for simple memory fill operation. With large data sizes
it is much faster to use EDMA for memory fill rather than CPU.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/include/asm/ti-common/ti-edma3.h |  2 ++
 drivers/dma/ti-edma3.c                    | 55 +++++++++++++++++++++++++++----
 2 files changed, 50 insertions(+), 7 deletions(-)

diff --git a/arch/arm/include/asm/ti-common/ti-edma3.h b/arch/arm/include/asm/ti-common/ti-edma3.h
index 6a7a321c1b..3f41d34a7a 100644
--- a/arch/arm/include/asm/ti-common/ti-edma3.h
+++ b/arch/arm/include/asm/ti-common/ti-edma3.h
@@ -119,5 +119,7 @@ void edma3_set_transfer_params(u32 base, int slot, int acnt,
 			       enum edma3_sync_dimension sync_mode);
 void edma3_transfer(unsigned long edma3_base_addr, unsigned int
 		edma_slot_num, void *dst, void *src, size_t len);
+void edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num,
+		void *dst, u8 val, size_t len);
 
 #endif
diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c
index 635eb7876d..852c9e1fd7 100644
--- a/drivers/dma/ti-edma3.c
+++ b/drivers/dma/ti-edma3.c
@@ -34,10 +34,14 @@
 #define EDMA3_QEESR				0x108c
 #define EDMA3_QSECR				0x1094
 
+#define EDMA_FILL_BUFFER_SIZE			512
+
 struct ti_edma3_priv {
 	u32 base;
 };
 
+static u8 edma_fill_buffer[EDMA_FILL_BUFFER_SIZE] __aligned(ARCH_DMA_MINALIGN);
+
 /**
  * qedma3_start - start qdma on a channel
  * @base: base address of edma
@@ -391,7 +395,7 @@ void qedma3_stop(u32 base, struct edma3_channel_config *cfg)
 }
 
 void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
-		      void *dst, void *src, size_t len)
+		      void *dst, void *src, size_t len, size_t s_len)
 {
 	struct edma3_slot_config        slot;
 	struct edma3_channel_config     edma_channel;
@@ -401,7 +405,11 @@ void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
 	unsigned int                    addr = (unsigned int) (dst);
 	unsigned int                    max_acnt  = 0x7FFFU;
 
-	if (len > max_acnt) {
+	if (len > s_len) {
+		b_cnt_value = (len / s_len);
+		rem_bytes = (len % s_len);
+		a_cnt_value = s_len;
+	} else if (len > max_acnt) {
 		b_cnt_value = (len / max_acnt);
 		rem_bytes  = (len % max_acnt);
 		a_cnt_value = max_acnt;
@@ -412,7 +420,10 @@ void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
 	slot.acnt       = a_cnt_value;
 	slot.bcnt       = b_cnt_value;
 	slot.ccnt       = 1;
-	slot.src_bidx   = a_cnt_value;
+	if (len == s_len)
+		slot.src_bidx = a_cnt_value;
+	else
+		slot.src_bidx = 0;
 	slot.dst_bidx   = a_cnt_value;
 	slot.src_cidx   = 0;
 	slot.dst_cidx   = 0;
@@ -438,8 +449,11 @@ void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
 
 	if (rem_bytes != 0) {
 		slot.opt        = 0;
-		slot.src        =
-			(b_cnt_value * max_acnt) + ((unsigned int) src);
+		if (len == s_len)
+			slot.src =
+				(b_cnt_value * max_acnt) + ((unsigned int) src);
+		else
+			slot.src = (unsigned int) src;
 		slot.acnt       = rem_bytes;
 		slot.bcnt       = 1;
 		slot.ccnt       = 1;
@@ -468,12 +482,39 @@ void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
 	}
 }
 
+void __edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num,
+		  void *dst, u8 val, size_t len)
+{
+	int xfer_len;
+	int max_xfer = EDMA_FILL_BUFFER_SIZE * 65535;
+
+	memset((void *)edma_fill_buffer, val, sizeof(edma_fill_buffer));
+
+	while (len) {
+		xfer_len = len;
+		if (xfer_len > max_xfer)
+			xfer_len = max_xfer;
+
+		__edma3_transfer(edma3_base_addr, edma_slot_num, dst,
+				 edma_fill_buffer, xfer_len,
+				 EDMA_FILL_BUFFER_SIZE);
+		len -= xfer_len;
+		dst += xfer_len;
+	}
+}
+
 #ifndef CONFIG_DMA
 
 void edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
 		    void *dst, void *src, size_t len)
 {
-	__edma3_transfer(edma3_base_addr, edma_slot_num, dst, src, len);
+	__edma3_transfer(edma3_base_addr, edma_slot_num, dst, src, len, len);
+}
+
+void edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num,
+		void *dst, u8 val, size_t len)
+{
+	__edma3_fill(edma3_base_addr, edma_slot_num, dst, val, len);
 }
 
 #else
@@ -488,7 +529,7 @@ static int ti_edma3_transfer(struct udevice *dev, int direction, void *dst,
 
 	switch (direction) {
 	case DMA_MEM_TO_MEM:
-		__edma3_transfer(priv->base, 1, dst, src, len);
+		__edma3_transfer(priv->base, 1, dst, src, len, len);
 		break;
 	default:
 		pr_err("Transfer type not implemented in DMA driver\n");
-- 
2.15.1

[U-Boot] [PATCH 02/13] arm: emif-common: Add ecc specific emif registers

[Lokesh Vutla]

This is a slight difference in emif_ddr_phy_status register offsets for
DRA7xx/keystone EMIF and older versions. And ecc registers are available only
in DRA7xx EMIF. Add support for this difference and ecc registers.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/include/asm/emif.h       | 17 ++++++++++++++++-
 arch/arm/mach-omap2/emif-common.c |  6 +++---
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 9a46340deb..a661ba9032 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -664,12 +664,27 @@ struct emif_reg_struct {
 	u32 emif_prio_class_serv_map;
 	u32 emif_connect_id_serv_1_map;
 	u32 emif_connect_id_serv_2_map;
-	u32 padding8[5];
+	u32 padding8;
+	u32 emif_ecc_ctrl_reg;
+	u32 emif_ecc_address_range_1;
+	u32 emif_ecc_address_range_2;
+	u32 padding8_1;
 	u32 emif_rd_wr_exec_thresh;
 	u32 emif_cos_config;
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_ARCH_KEYSTONE)
+	u32 padding9[2];
+	u32 emif_1b_ecc_err_cnt;
+	u32 emif_1b_ecc_err_thrush;
+	u32 emif_1b_ecc_err_dist_1;
+	u32 emif_1b_ecc_err_addr_log;
+	u32 emif_2b_ecc_err_addr_log;
+	u32 emif_ddr_phy_status[28];
+	u32 padding10[19];
+#else
 	u32 padding9[6];
 	u32 emif_ddr_phy_status[28];
 	u32 padding10[20];
+#endif
 	u32 emif_ddr_ext_phy_ctrl_1;
 	u32 emif_ddr_ext_phy_ctrl_1_shdw;
 	u32 emif_ddr_ext_phy_ctrl_2;
diff --git a/arch/arm/mach-omap2/emif-common.c b/arch/arm/mach-omap2/emif-common.c
index def7fe0f0a..2b03dbecf4 100644
--- a/arch/arm/mach-omap2/emif-common.c
+++ b/arch/arm/mach-omap2/emif-common.c
@@ -255,7 +255,7 @@ static void update_hwleveling_output(u32 base, const struct emif_regs *regs)
 	u32 *emif_ext_phy_ctrl_reg, *emif_phy_status;
 	u32 reg, i, phy;
 
-	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[7];
+	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[6];
 	phy = readl(&emif->emif_ddr_phy_ctrl_1);
 
 	/* Update PHY_REG_RDDQS_RATIO */
@@ -269,7 +269,7 @@ static void update_hwleveling_output(u32 base, const struct emif_regs *regs)
 
 	/* Update PHY_REG_FIFO_WE_SLAVE_RATIO */
 	emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_2;
-	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[12];
+	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[11];
 	if (!(phy & EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_MASK))
 		for (i = 0; i < PHY_FIFO_WE_SLAVE_RATIO_REGS; i++) {
 			reg = readl(emif_phy_status++);
@@ -279,7 +279,7 @@ static void update_hwleveling_output(u32 base, const struct emif_regs *regs)
 
 	/* Update PHY_REG_WR_DQ/DQS_SLAVE_RATIO */
 	emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_12;
-	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[17];
+	emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[16];
 	if (!(phy & EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_MASK))
 		for (i = 0; i < PHY_REG_WR_DQ_SLAVE_RATIO_REGS; i++) {
 			reg = readl(emif_phy_status++);
-- 
2.15.1

[U-Boot] [PATCH 03/13] arm: emif-common: Add suppport for enabling ECC

[Lokesh Vutla]

For data integrity, the EMIF1 supports ECC on the data
written or read from the SDRAM. Add support for enabling
ECC support in EMIF1.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
---
 arch/arm/include/asm/emif.h       | 31 ++++++++++++++
 arch/arm/mach-omap2/emif-common.c | 89 ++++++++++++++++++++++++++++++++++++++-
 2 files changed, 119 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index a661ba9032..6a2ccd2350 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -604,6 +604,34 @@
 
 #define EMIF_EXT_PHY_CTRL_TIMING_REG	0x5
 
+/* EMIF ECC CTRL reg */
+#define EMIF_ECC_CTRL_REG_ECC_EN_SHIFT			31
+#define EMIF_ECC_CTRL_REG_ECC_EN_MASK			(1 << 31)
+#define EMIF_ECC_CTRL_REG_ECC_ADDR_RGN_PROT_SHIFT	30
+#define EMIF_ECC_CTRL_REG_ECC_ADDR_RGN_PROT_MASK	(1 << 31)
+#define EMIF_ECC_CTRL_REG_ECC_VERIFY_DIS_SHIFT		29
+#define EMIF_ECC_CTRL_REG_ECC_VERIFY_DIS_MASK		(1 << 29)
+#define EMIF_ECC_REG_RMW_EN_SHIFT			28
+#define EMIF_ECC_REG_RMW_EN_MASK			(1 << 28)
+#define EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_SHIFT		1
+#define EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK		(1 << 1)
+#define EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_SHIFT		0
+#define EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK		(1 << 0)
+
+/* EMIF ECC ADDRESS RANGE */
+#define EMIF_ECC_REG_ECC_END_ADDR_SHIFT			16
+#define EMIF_ECC_REG_ECC_END_ADDR_MASK			(0xffff << 16)
+#define EMIF_ECC_REG_ECC_START_ADDR_SHIFT		0
+#define EMIF_ECC_REG_ECC_START_ADDR_MASK		(0xffff << 0)
+
+/* EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS */
+#define EMIF_INT_ONEBIT_ECC_ERR_SYS_SHIFT		5
+#define EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK		(1 << 5)
+#define EMIF_INT_TWOBIT_ECC_ERR_SYS_SHIFT		4
+#define EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK		(1 << 4)
+#define EMIF_INT_WR_ECC_ERR_SYS_SHIFT			3
+#define EMIF_INT_WR_ECC_ERR_SYS_MASK			(1 << 3)
+
 /* Reg mapping structure */
 struct emif_reg_struct {
 	u32 emif_mod_id_rev;
@@ -1205,6 +1233,9 @@ struct emif_regs {
 	u32 emif_connect_id_serv_1_map;
 	u32 emif_connect_id_serv_2_map;
 	u32 emif_cos_config;
+	u32 emif_ecc_ctrl_reg;
+	u32 emif_ecc_address_range_1;
+	u32 emif_ecc_address_range_2;
 };
 
 struct lpddr2_mr_regs {
diff --git a/arch/arm/mach-omap2/emif-common.c b/arch/arm/mach-omap2/emif-common.c
index 2b03dbecf4..e3ef37b077 100644
--- a/arch/arm/mach-omap2/emif-common.c
+++ b/arch/arm/mach-omap2/emif-common.c
@@ -17,6 +17,7 @@
 #include <asm/omap_sec_common.h>
 #include <asm/utils.h>
 #include <linux/compiler.h>
+#include <asm/ti-common/ti-edma3.h>
 
 static int emif1_enabled = -1, emif2_enabled = -1;
 
@@ -332,6 +333,71 @@ static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs)
 	update_hwleveling_output(base, regs);
 }
 
+static void dra7_reset_ddr_data(u32 base, u32 size)
+{
+#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
+	enable_edma3_clocks();
+
+	edma3_fill(EDMA3_BASE, 1, (void *)base, 0, size);
+
+	disable_edma3_clocks();
+#else
+	memset((void *)base, 0, size);
+#endif
+}
+
+static void dra7_enable_ecc(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+	u32 rgn, size;
+
+	/* ECC available only on dra76x EMIF1 */
+	if ((base != EMIF1_BASE) || !is_dra76x())
+		return;
+
+	if (regs->emif_ecc_ctrl_reg & EMIF_ECC_CTRL_REG_ECC_EN_MASK) {
+		writel(regs->emif_ecc_address_range_1,
+		       &emif->emif_ecc_address_range_1);
+		writel(regs->emif_ecc_address_range_2,
+		       &emif->emif_ecc_address_range_2);
+		writel(regs->emif_ecc_ctrl_reg, &emif->emif_ecc_ctrl_reg);
+
+		/* Set region1 memory with 0 */
+		rgn = ((regs->emif_ecc_address_range_1 &
+			EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16) +
+		       CONFIG_SYS_SDRAM_BASE;
+		size = (regs->emif_ecc_address_range_1 &
+			EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000;
+
+		if (regs->emif_ecc_ctrl_reg &
+		    EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK)
+			dra7_reset_ddr_data(rgn, size);
+
+		/* Set region2 memory with 0 */
+		rgn = ((regs->emif_ecc_address_range_2 &
+			EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16) +
+		       CONFIG_SYS_SDRAM_BASE;
+		size = (regs->emif_ecc_address_range_2 &
+			EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000;
+
+		if (regs->emif_ecc_ctrl_reg &
+		    EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK)
+			dra7_reset_ddr_data(rgn, size);
+
+#ifdef CONFIG_DRA7XX
+		/* Clear the status flags and other history */
+		writel(readl(&emif->emif_1b_ecc_err_cnt),
+		       &emif->emif_1b_ecc_err_cnt);
+		writel(0xffffffff, &emif->emif_1b_ecc_err_dist_1);
+		writel(0x1, &emif->emif_2b_ecc_err_addr_log);
+		writel(EMIF_INT_WR_ECC_ERR_SYS_MASK |
+		       EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK |
+		       EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK,
+		       &emif->emif_irqstatus_sys);
+#endif
+	}
+}
+
 static void dra7_ddr3_init(u32 base, const struct emif_regs *regs)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -368,8 +434,29 @@ static void dra7_ddr3_init(u32 base, const struct emif_regs *regs)
 
 	writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl);
 
-	if (regs->emif_rd_wr_lvl_rmp_ctl & EMIF_REG_RDWRLVL_EN_MASK)
+	if (regs->emif_rd_wr_lvl_rmp_ctl & EMIF_REG_RDWRLVL_EN_MASK) {
+		/*
+		 * Perform Dummy ECC setup just to allow hardware
+		 * leveling of ECC memories
+		 */
+		if (is_dra76x() && (base == EMIF1_BASE) &&
+		    (regs->emif_ecc_ctrl_reg & EMIF_ECC_CTRL_REG_ECC_EN_MASK)) {
+			writel(0, &emif->emif_ecc_address_range_1);
+			writel(0, &emif->emif_ecc_address_range_2);
+			writel(EMIF_ECC_CTRL_REG_ECC_EN_MASK |
+			       EMIF_ECC_CTRL_REG_ECC_ADDR_RGN_PROT_MASK,
+			       &emif->emif_ecc_ctrl_reg);
+		}
+
 		dra7_ddr3_leveling(base, regs);
+
+		/* Disable ECC */
+		if (is_dra76x())
+			writel(0, &emif->emif_ecc_ctrl_reg);
+	}
+
+	/* Enable ECC as necessary */
+	dra7_enable_ecc(base, regs);
 }
 
 static void omap5_ddr3_init(u32 base, const struct emif_regs *regs)
-- 
2.15.1

[U-Boot] [PATCH 04/13] arm: keystone: Move cmd_ddr3 to a common place

[Lokesh Vutla]

Move cmd_ddr3 to board/ti/common/ in order to make
it build for non-keystone TI platforms.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-keystone/Kconfig                         | 4 ++++
 arch/arm/mach-keystone/Makefile                        | 1 -
 board/ti/common/Kconfig                                | 7 +++++++
 board/ti/common/Makefile                               | 3 +++
 {arch/arm/mach-keystone => board/ti/common}/cmd_ddr3.c | 5 ++---
 5 files changed, 16 insertions(+), 4 deletions(-)
 rename {arch/arm/mach-keystone => board/ti/common}/cmd_ddr3.c (98%)

diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index cababdba52..d24596eccb 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -7,16 +7,19 @@ choice
 config TARGET_K2HK_EVM
 	bool "TI Keystone 2 Kepler/Hawking EVM"
 	select SPL_BOARD_INIT if SPL
+	select CMD_DDR3
 	imply DM_I2C
 
 config TARGET_K2E_EVM
 	bool "TI Keystone 2 Edison EVM"
 	select SPL_BOARD_INIT if SPL
+	select CMD_DDR3
 	imply DM_I2C
 
 config TARGET_K2L_EVM
 	bool "TI Keystone 2 Lamar EVM"
 	select SPL_BOARD_INIT if SPL
+	select CMD_DDR3
 	imply DM_I2C
 
 config TARGET_K2G_EVM
@@ -24,6 +27,7 @@ config TARGET_K2G_EVM
         select BOARD_LATE_INIT
 	select SPL_BOARD_INIT if SPL
         select TI_I2C_BOARD_DETECT
+	select CMD_DDR3
 	imply DM_I2C
 
 endchoice
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index 8253a3bcc1..3e076e12ec 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -13,7 +13,6 @@ ifndef CONFIG_SPL_BUILD
 obj-y	+= cmd_clock.o
 obj-y	+= cmd_mon.o
 obj-y	+= cmd_poweroff.o
-obj-y	+= cmd_ddr3.o
 endif
 obj-y	+= msmc.o
 obj-y	+= ddr3.o
diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig
index c21eb8c2d2..d7c05e2451 100644
--- a/board/ti/common/Kconfig
+++ b/board/ti/common/Kconfig
@@ -42,3 +42,10 @@ config TI_COMMON_CMD_OPTIONS
 	imply CMD_SPI
 	imply CMD_TIME
 	imply CMD_USB if USB
+
+config CMD_DDR3
+	bool "command for verifying DDR features"
+	help
+	   Support for testing ddr3 on TI platforms. This command
+	   supports memory verification, memory comapre and ecc
+	   verification if supported.
diff --git a/board/ti/common/Makefile b/board/ti/common/Makefile
index 7170eac81e..66025040bc 100644
--- a/board/ti/common/Makefile
+++ b/board/ti/common/Makefile
@@ -4,3 +4,6 @@
 #
 
 obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o
+ifndef CONFIG_SPL_BUILD
+obj-${CONFIG_CMD_DDR3} += cmd_ddr3.o
+endif
diff --git a/arch/arm/mach-keystone/cmd_ddr3.c b/board/ti/common/cmd_ddr3.c
similarity index 98%
rename from arch/arm/mach-keystone/cmd_ddr3.c
rename to board/ti/common/cmd_ddr3.c
index d3eab0711c..b6435a43f4 100644
--- a/arch/arm/mach-keystone/cmd_ddr3.c
+++ b/board/ti/common/cmd_ddr3.c
@@ -1,8 +1,7 @@
 /*
- * Keystone2: DDR3 test commands
+ * EMIF: DDR3 test commands
  *
- * (C) Copyright 2012-2014
- *     Texas Instruments Incorporated, <www.ti.com>
+ * Copyright (C) 2012-2017 Texas Instruments Incorporated, <www.ti.com>
  *
  * SPDX-License-Identifier:     GPL-2.0+
  */
-- 
2.15.1

[U-Boot] [PATCH 04/13] arm: keystone: Move cmd_ddr3 to a common place

[Tom Rini]

On Mon, Dec 18, 2017 at 03:04:16PM +0530, Lokesh Vutla wrote:

> Move cmd_ddr3 to board/ti/common/ in order to make
> it build for non-keystone TI platforms.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[snip]
> diff --git a/board/ti/common/Makefile b/board/ti/common/Makefile
> index 7170eac81e..66025040bc 100644
> --- a/board/ti/common/Makefile
> +++ b/board/ti/common/Makefile
> @@ -4,3 +4,6 @@
>  #
>  
>  obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o
> +ifndef CONFIG_SPL_BUILD
> +obj-${CONFIG_CMD_DDR3} += cmd_ddr3.o
> +endif

We shouldn't need games like that now to have all strings be discarded,
now that we're mandating gcc-6 or later.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171218/30fba7c3/attachment.sig>

[U-Boot] [PATCH 04/13] arm: keystone: Move cmd_ddr3 to a common place

[Lokesh Vutla]

On Tuesday 19 December 2017 01:33 AM, Tom Rini wrote:
> On Mon, Dec 18, 2017 at 03:04:16PM +0530, Lokesh Vutla wrote:
> 
>> Move cmd_ddr3 to board/ti/common/ in order to make
>> it build for non-keystone TI platforms.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> [snip]
>> diff --git a/board/ti/common/Makefile b/board/ti/common/Makefile
>> index 7170eac81e..66025040bc 100644
>> --- a/board/ti/common/Makefile
>> +++ b/board/ti/common/Makefile
>> @@ -4,3 +4,6 @@
>>  #
>>  
>>  obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o
>> +ifndef CONFIG_SPL_BUILD
>> +obj-${CONFIG_CMD_DDR3} += cmd_ddr3.o
>> +endif
> 
> We shouldn't need games like that now to have all strings be discarded,
> now that we're mandating gcc-6 or later.  Thanks!
> 

whithout guarding with !SPL_BUILD, following build erroris seen if
SPL_ENV is not enabled:

#
env/built-in.o:(.data.env_htab+0xc): undefined reference to
`env_flags_validate'
lib/built-in.o: In function `hsearch_r':
/home/lokesh/working/mainline/u-boot/lib/hashtable.c:380: undefined
reference to `env_callback_init'
/home/lokesh/working/mainline/u-boot/lib/hashtable.c:382: undefined
reference to `env_flags_init'
scripts/Makefile.spl:343: recipe for target 'spl/u-boot-spl' failed
make[1]: *** [spl/u-boot-spl] Error 1
Makefile:1400: recipe for target 'spl/u-boot-spl' failed
make: *** [spl/u-boot-spl] Error 2


gcc-6 is being used. Am I missing something?

Thanks and regards,
Lokesh

[U-Boot] [PATCH 04/13] arm: keystone: Move cmd_ddr3 to a common place

[Tom Rini]

On Tue, Dec 19, 2017 at 10:31:19AM +0530, Lokesh Vutla wrote:
> 
> 
> On Tuesday 19 December 2017 01:33 AM, Tom Rini wrote:
> > On Mon, Dec 18, 2017 at 03:04:16PM +0530, Lokesh Vutla wrote:
> > 
> >> Move cmd_ddr3 to board/ti/common/ in order to make
> >> it build for non-keystone TI platforms.
> >>
> >> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> > [snip]
> >> diff --git a/board/ti/common/Makefile b/board/ti/common/Makefile
> >> index 7170eac81e..66025040bc 100644
> >> --- a/board/ti/common/Makefile
> >> +++ b/board/ti/common/Makefile
> >> @@ -4,3 +4,6 @@
> >>  #
> >>  
> >>  obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o
> >> +ifndef CONFIG_SPL_BUILD
> >> +obj-${CONFIG_CMD_DDR3} += cmd_ddr3.o
> >> +endif
> > 
> > We shouldn't need games like that now to have all strings be discarded,
> > now that we're mandating gcc-6 or later.  Thanks!
> 
> whithout guarding with !SPL_BUILD, following build erroris seen if
> SPL_ENV is not enabled:
> 
> #
> env/built-in.o:(.data.env_htab+0xc): undefined reference to
> `env_flags_validate'
> lib/built-in.o: In function `hsearch_r':
> /home/lokesh/working/mainline/u-boot/lib/hashtable.c:380: undefined
> reference to `env_callback_init'
> /home/lokesh/working/mainline/u-boot/lib/hashtable.c:382: undefined
> reference to `env_flags_init'
> scripts/Makefile.spl:343: recipe for target 'spl/u-boot-spl' failed
> make[1]: *** [spl/u-boot-spl] Error 1
> Makefile:1400: recipe for target 'spl/u-boot-spl' failed
> make: *** [spl/u-boot-spl] Error 2
> 
> 
> gcc-6 is being used. Am I missing something?

Hmmm, I would have expected it to be gc'd away.  But I guess we're
forcing commands to be linked in for some reason, I'll dig more just so
I know again but disregard my comment about removing the guard, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171219/45f81ab2/attachment.sig>

[U-Boot] [PATCH 04/13] arm: keystone: Move cmd_ddr3 to a common place

[Tom Rini]

On Tue, Dec 19, 2017 at 10:31:19AM +0530, Lokesh Vutla wrote:
> 
> 
> On Tuesday 19 December 2017 01:33 AM, Tom Rini wrote:
> > On Mon, Dec 18, 2017 at 03:04:16PM +0530, Lokesh Vutla wrote:
> > 
> >> Move cmd_ddr3 to board/ti/common/ in order to make
> >> it build for non-keystone TI platforms.
> >>
> >> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> > [snip]
> >> diff --git a/board/ti/common/Makefile b/board/ti/common/Makefile
> >> index 7170eac81e..66025040bc 100644
> >> --- a/board/ti/common/Makefile
> >> +++ b/board/ti/common/Makefile
> >> @@ -4,3 +4,6 @@
> >>  #
> >>  
> >>  obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o
> >> +ifndef CONFIG_SPL_BUILD
> >> +obj-${CONFIG_CMD_DDR3} += cmd_ddr3.o
> >> +endif

While I'm looking at this again, we should probably mirror cmd/mvebu
here and move this to cmd/ti/ instead of board/ti/common/, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171219/95195222/attachment.sig>

[U-Boot] [PATCH 05/13] arm: ti: Generalize cmd_ddr3 command

[Lokesh Vutla]

Keystone and DRA7 based TI platforms uses same
EMIF memory controller. cmd_ddr3 command is customized
for keystone platforms, make it generic so that it can
be re used for DRA7  platforms.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/include/asm/emif.h                    |   2 +
 arch/arm/mach-keystone/include/mach/hardware.h |   1 +
 board/ti/common/cmd_ddr3.c                     | 174 ++++++++++++++++++++-----
 3 files changed, 141 insertions(+), 36 deletions(-)

diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 6a2ccd2350..b9fa3bb827 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -17,7 +17,9 @@
 #include <asm/io.h>
 
 /* Base address */
+#ifndef EMIF1_BASE
 #define EMIF1_BASE				0x4c000000
+#endif
 #define EMIF2_BASE				0x4d000000
 
 #define EMIF_4D					0x4
diff --git a/arch/arm/mach-keystone/include/mach/hardware.h b/arch/arm/mach-keystone/include/mach/hardware.h
index 1969a10ab3..6629406870 100644
--- a/arch/arm/mach-keystone/include/mach/hardware.h
+++ b/arch/arm/mach-keystone/include/mach/hardware.h
@@ -78,6 +78,7 @@ typedef volatile unsigned int   *dv_reg_p;
 #define KS2_DDR3A_EMIF_CTRL_BASE	0x21010000
 #define KS2_DDR3A_EMIF_DATA_BASE	0x80000000
 #define KS2_DDR3A_DDRPHYC		0x02329000
+#define EMIF1_BASE			KS2_DDR3A_EMIF_CTRL_BASE
 
 #define KS2_DDR3_MIDR_OFFSET            0x00
 #define KS2_DDR3_STATUS_OFFSET          0x04
diff --git a/board/ti/common/cmd_ddr3.c b/board/ti/common/cmd_ddr3.c
index b6435a43f4..0e35d5cbbd 100644
--- a/board/ti/common/cmd_ddr3.c
+++ b/board/ti/common/cmd_ddr3.c
@@ -7,23 +7,25 @@
  */
 
 #include <asm/arch/hardware.h>
-#include <asm/arch/ddr3.h>
+#include <asm/cache.h>
+#include <asm/emif.h>
 #include <common.h>
 #include <command.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
+#ifdef CONFIG_ARCH_KEYSTONE
+#include <asm/arch/ddr3.h>
 #define DDR_MIN_ADDR		CONFIG_SYS_SDRAM_BASE
-#define STACKSIZE		(512 << 10)     /* 512 KiB */
-
+#define STACKSIZE              (512 << 10)     /* 512 KiB */
 #define DDR_REMAP_ADDR		0x80000000
 #define ECC_START_ADDR1		((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17)
 
-#define ECC_END_ADDR1		(((gd->start_addr_sp - DDR_REMAP_ADDR - \
-				 STACKSIZE) >> 17) - 2)
+#define ECC_END_ADDR1          (((gd->start_addr_sp - DDR_REMAP_ADDR - \
+				STACKSIZE) >> 17) - 2)
+#endif
 
 #define DDR_TEST_BURST_SIZE	1024
 
+DECLARE_GLOBAL_DATA_PTR;
 static int ddr_memory_test(u32 start_address, u32 end_address, int quick)
 {
 	u32 index_start, value, index;
@@ -153,57 +155,157 @@ static int ddr_memory_compare(u32 address1, u32 address2, u32 size)
 	return 0;
 }
 
-static int ddr_memory_ecc_err(u32 base, u32 address, u32 ecc_err)
+#ifndef CONFIG_ARCH_KEYSTONE
+static void ddr_check_ecc_status(void)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+	u32 err_1b = readl(&emif->emif_1b_ecc_err_cnt);
+	u32 int_status = readl(&emif->emif_irqstatus_raw_sys);
+	int ecc_test = 0;
+	char *env;
+
+	env = env_get("ecc_test");
+	if (env)
+		ecc_test = simple_strtol(env, NULL, 0);
+
+	puts("ECC test Status:\n");
+	if (int_status & EMIF_INT_WR_ECC_ERR_SYS_MASK)
+		puts("\tECC test: DDR ECC write error interrupted\n");
+
+	if (int_status & EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK)
+		if (!ecc_test)
+			panic("\tECC test: DDR ECC 2-bit error interrupted");
+
+	if (int_status & EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK)
+		puts("\tECC test: DDR ECC 1-bit error interrupted\n");
+
+	if (err_1b)
+		printf("\tECC test: 1-bit ECC err count: 0x%x\n", err_1b);
+}
+#endif
+
+static int ddr_memory_ecc_err(u32 addr, u32 ecc_err)
 {
-	u32 value1, value2, value3;
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+	u32 ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg);
+	u32 val1, val2, val3;
+
+	debug("Disabling D-Cache before ECC test\n");
+	dcache_disable();
+	invalidate_dcache_all();
+
+	puts("Testing DDR ECC:\n");
+	puts("\tECC test: Disabling DDR ECC ...\n");
+	writel(0, &emif->emif_ecc_ctrl_reg);
+
+	val1 = readl(addr);
+	val2 = val1 ^ ecc_err;
+	writel(val2, addr);
+
+	val3 = readl(addr);
+	printf("\tECC test: addr 0x%x, read data 0x%x, written data 0x%x, err pattern: 0x%x, read after write data 0x%x\n",
+	       addr, val1, val2, ecc_err, val3);
 
-	puts("Disabling DDR ECC ...\n");
-	ddr3_disable_ecc(base);
+	puts("\tECC test: Enabling DDR ECC ...\n");
+#ifdef CONFIG_ARCH_KEYSTONE
+	ecc_ctrl = ECC_START_ADDR1 | (ECC_END_ADDR1 << 16);
+	__raw_writel(ecc_ctrl, EMIF1_BASE + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
+	ddr3_enable_ecc(EMIF1_BASE, 1);
 
-	value1 = __raw_readl(address);
-	value2 = value1 ^ ecc_err;
-	__raw_writel(value2, address);
+	val1 = __raw_readl(addr);
+	printf("ECC err test, addr 0x%x, read data 0x%x\n", addr, val1);
 
-	value3 = __raw_readl(address);
-	printf("ECC err test, addr 0x%x, read data 0x%x, wrote data 0x%x, err pattern: 0x%x, read after write data 0x%x\n",
-	       address, value1, value2, ecc_err, value3);
+	ddr3_check_ecc_int(EMIF1_BASE);
+#else
+	writel(ecc_ctrl, &emif->emif_ecc_ctrl_reg);
 
-	__raw_writel(ECC_START_ADDR1 | (ECC_END_ADDR1 << 16),
-		     base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
+	val1 = readl(addr);
+	printf("\tECC test: addr 0x%x, read data 0x%x\n", addr, val1);
 
-	puts("Enabling DDR ECC ...\n");
-	ddr3_enable_ecc(base, 1);
+	ddr_check_ecc_status();
 
-	value1 = __raw_readl(address);
-	printf("ECC err test, addr 0x%x, read data 0x%x\n", address, value1);
+	debug("Enabling D-cache back after ECC test\n");
+	enable_caches();
+#endif
 
-	ddr3_check_ecc_int(base);
 	return 0;
 }
 
+static int is_addr_valid(u32 addr)
+{
+#ifndef CONFIG_ARCH_KEYSTONE
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+	u32 start_addr, end_addr, range, ecc_ctrl;
+
+	ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg);
+
+	printf("%s: emif1_base = 0x%x,  Ecc ctrl = 0x%x \n", __func__, EMIF1_BASE, ecc_ctrl);
+
+	/* Check in ecc address range 1 */
+	if (ecc_ctrl & EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK) {
+		range = readl(&emif->emif_ecc_address_range_1);
+		start_addr = ((range & EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16)
+				+ CONFIG_SYS_SDRAM_BASE;
+		end_addr = start_addr + (range & EMIF_ECC_REG_ECC_END_ADDR_MASK)
+				+ 0xFFFF;
+		if ((addr >= start_addr) && (addr <= end_addr))
+			/* addr within ecc address range 1 */
+			return 1;
+	}
+
+	/* Check in ecc address range 2 */
+	if (ecc_ctrl & EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK) {
+		range = readl(&emif->emif_ecc_address_range_2);
+		start_addr = ((range & EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16)
+				+ CONFIG_SYS_SDRAM_BASE;
+		end_addr = start_addr + (range & EMIF_ECC_REG_ECC_END_ADDR_MASK)
+				+ 0xFFFF;
+		if ((addr >= start_addr) && (addr <= end_addr))
+			/* addr within ecc address range 2 */
+			return 1;
+	}
+
+	return 0;
+#else
+	if ((addr < CONFIG_SYS_SDRAM_BASE) ||
+	    (addr > (CONFIG_SYS_SDRAM_BASE + CONFIG_MAX_RAM_BANK_SIZE - 1))) {
+		puts("Invalid address!\n");
+		return 1;
+	}
+
+	return 1;
+#endif
+}
+
+static int is_ecc_enabled(void)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+	u32 ecc_ctrl = readl(&emif->emif_ecc_ctrl_reg);
+
+	return (ecc_ctrl & EMIF_ECC_CTRL_REG_ECC_EN_MASK) &&
+		(ecc_ctrl & EMIF_ECC_REG_RMW_EN_MASK);
+}
+
 static int do_ddr_test(cmd_tbl_t *cmdtp,
 		       int flag, int argc, char * const argv[])
 {
 	u32 start_addr, end_addr, size, ecc_err;
 
 	if ((argc == 4) && (strncmp(argv[1], "ecc_err", 8) == 0)) {
-		if (!ddr3_ecc_support_rmw(KS2_DDR3A_EMIF_CTRL_BASE)) {
-			puts("ECC RMW isn't supported for this SOC\n");
-			return 1;
+		if (!is_ecc_enabled()) {
+			puts("ECC not enabled. Please Enable ECC any try again\n");
+			return CMD_RET_FAILURE;
 		}
 
 		start_addr = simple_strtoul(argv[2], NULL, 16);
 		ecc_err = simple_strtoul(argv[3], NULL, 16);
 
-		if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
-		    (start_addr > (CONFIG_SYS_SDRAM_BASE +
-		     CONFIG_MAX_RAM_BANK_SIZE - 1))) {
-			puts("Invalid address!\n");
-			return cmd_usage(cmdtp);
+		if (!is_addr_valid(start_addr)) {
+			puts("Invalid address. Please enter ECC supported address!\n");
+			return CMD_RET_FAILURE;
 		}
 
-		ddr_memory_ecc_err(KS2_DDR3A_EMIF_CTRL_BASE,
-				   start_addr, ecc_err);
+		ddr_memory_ecc_err(start_addr, ecc_err);
 		return 0;
 	}
 
@@ -216,10 +318,10 @@ static int do_ddr_test(cmd_tbl_t *cmdtp,
 
 	if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
 	    (start_addr > (CONFIG_SYS_SDRAM_BASE +
-	     CONFIG_MAX_RAM_BANK_SIZE - 1)) ||
+	     get_effective_memsize() - 1)) ||
 	    (end_addr < CONFIG_SYS_SDRAM_BASE) ||
 	    (end_addr > (CONFIG_SYS_SDRAM_BASE +
-	     CONFIG_MAX_RAM_BANK_SIZE - 1)) || (start_addr >= end_addr)) {
+	     get_effective_memsize() - 1)) || (start_addr >= end_addr)) {
 		puts("Invalid start or end address!\n");
 		return cmd_usage(cmdtp);
 	}
-- 
2.15.1

[U-Boot] [PATCH 06/13] arm: dra762: Add support for device package identification

[Lokesh Vutla]

DRA762 comes in two packages:
- ABZ: Pin compatible package with DRA742 with DDR at 1333MHz
- ACD: High performance(OPP_PLUS) package with new IPs

Both the above packages uses the same IDCODE hence needs to
differentiate using package information in DIE_ID_2.
Add support for the same. Also update clock, ddr, emif information.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/include/asm/arch-omap5/omap.h      |  3 +++
 arch/arm/include/asm/arch-omap5/sys_proto.h |  1 +
 arch/arm/include/asm/omap_common.h          | 14 ++++++++++++
 arch/arm/mach-omap2/hwinit-common.c         | 33 +++++++++++++++++++++++++++--
 arch/arm/mach-omap2/omap5/hw_data.c         |  4 ++++
 arch/arm/mach-omap2/omap5/hwinit.c          | 21 ++++++++++++++++++
 arch/arm/mach-omap2/omap5/sdram.c           |  4 ++++
 board/ti/dra7xx/evm.c                       | 17 +++++++++++----
 8 files changed, 91 insertions(+), 6 deletions(-)

diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 81feac704a..f8e7f06442 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -66,6 +66,9 @@
 #define DRA722_CONTROL_ID_CODE_ES2_0		0x1B9BC02F
 #define DRA722_CONTROL_ID_CODE_ES2_1		0x2B9BC02F
 
+#define DRA762_ABZ_PACKAGE			0x2
+#define DRA762_ACD_PACKAGE			0x3
+
 /* UART */
 #define UART1_BASE		(OMAP54XX_L4_PER_BASE + 0x6a000)
 #define UART2_BASE		(OMAP54XX_L4_PER_BASE + 0x6c000)
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index ab0e7fae9c..a6b3557b50 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -62,6 +62,7 @@ u32 omap_sdram_size(void);
 u32 cortex_rev(void);
 void save_omap_boot_params(void);
 void init_omap_revision(void);
+void init_package_revision(void);
 void do_io_settings(void);
 void sri2c_init(void);
 int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 481e9389c4..9624fb81fa 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -743,6 +743,18 @@ static inline u8 is_dra76x(void)
 	extern u32 *const omap_si_rev;
 	return (*omap_si_rev & 0xFFF00000) == DRA76X;
 }
+
+static inline u8 is_dra76x_abz(void)
+{
+	extern u32 *const omap_si_rev;
+	return (*omap_si_rev & 0xF) == 2;
+}
+
+static inline u8 is_dra76x_acd(void)
+{
+	extern u32 *const omap_si_rev;
+	return (*omap_si_rev & 0xF) == 3;
+}
 #endif
 
 /*
@@ -778,6 +790,8 @@ static inline u8 is_dra76x(void)
 #define DRA722_ES2_0	0x07220200
 #define DRA722_ES2_1	0x07220210
 
+#define DRA762_ABZ_ES1_0	0x07620102
+#define DRA762_ACD_ES1_0	0x07620103
 /*
  * silicon device type
  * Moving to common from cpu.h, since it is shared by various omap devices
diff --git a/arch/arm/mach-omap2/hwinit-common.c b/arch/arm/mach-omap2/hwinit-common.c
index 56890a0c54..4f491e60f2 100644
--- a/arch/arm/mach-omap2/hwinit-common.c
+++ b/arch/arm/mach-omap2/hwinit-common.c
@@ -66,7 +66,7 @@ static void omap_rev_string(void)
 	u32 major_rev = (omap_rev & 0x00000F00) >> 8;
 	u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
 
-	const char *sec_s;
+	const char *sec_s, *package = NULL;
 
 	switch (get_device_type()) {
 	case TST_DEVICE:
@@ -85,11 +85,29 @@ static void omap_rev_string(void)
 		sec_s = "?";
 	}
 
+#if defined(CONFIG_DRA7XX)
+	if (is_dra76x()) {
+		switch (omap_rev & 0xF) {
+		case DRA762_ABZ_PACKAGE:
+			package = "ABZ";
+			break;
+		case DRA762_ACD_PACKAGE:
+		default:
+			package = "ACD";
+			break;
+		}
+	}
+#endif
+
 	if (soc_variant)
 		printf("OMAP");
 	else
 		printf("DRA");
-	printf("%x-%s ES%x.%x\n", omap_variant, sec_s, major_rev, minor_rev);
+	printf("%x-%s ES%x.%x", omap_variant, sec_s, major_rev, minor_rev);
+	if (package)
+		printf(" %s package\n", package);
+	else
+		puts("\n");
 }
 
 #ifdef CONFIG_SPL_BUILD
@@ -127,6 +145,16 @@ void s_init(void)
 {
 }
 
+/**
+ * init_package_revision() - Initialize package revision
+ *
+ * Function to get the pacakage information. This is expected to be
+ * overridden in the SoC family file where desired.
+ */
+void __weak init_package_revision(void)
+{
+}
+
 /**
  * early_system_init - Does Early system initialization.
  *
@@ -146,6 +174,7 @@ void early_system_init(void)
 {
 	init_omap_revision();
 	hw_data_init();
+	init_package_revision();
 
 #ifdef CONFIG_SPL_BUILD
 	if (warm_reset())
diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c
index 3bdb114bb6..bb05e1920b 100644
--- a/arch/arm/mach-omap2/omap5/hw_data.c
+++ b/arch/arm/mach-omap2/omap5/hw_data.c
@@ -746,6 +746,8 @@ void __weak hw_data_init(void)
 	*ctrl = &omap5_ctrl;
 	break;
 
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
 	case DRA762_ES1_0:
 	*prcm = &dra7xx_prcm;
 	*dplls_data = &dra76x_dplls;
@@ -792,6 +794,8 @@ void get_ioregs(const struct ctrl_ioregs **regs)
 	case DRA752_ES1_1:
 	case DRA752_ES2_0:
 	case DRA762_ES1_0:
+	case DRA762_ACD_ES1_0:
+	case DRA762_ABZ_ES1_0:
 		*regs = &ioregs_dra7xx_es1;
 		break;
 	case DRA722_ES1_0:
diff --git a/arch/arm/mach-omap2/omap5/hwinit.c b/arch/arm/mach-omap2/omap5/hwinit.c
index 14a35dd284..57f2a8664c 100644
--- a/arch/arm/mach-omap2/omap5/hwinit.c
+++ b/arch/arm/mach-omap2/omap5/hwinit.c
@@ -389,6 +389,27 @@ void init_omap_revision(void)
 	init_cpu_configuration();
 }
 
+void init_package_revision(void)
+{
+	unsigned int die_id[4] = { 0 };
+	u8 package;
+
+	omap_die_id(die_id);
+	package = (die_id[2] >> 16) & 0x3;
+
+	if (is_dra76x()) {
+		switch (package) {
+		case DRA762_ABZ_PACKAGE:
+			*omap_si_rev = DRA762_ABZ_ES1_0;
+			break;
+		case DRA762_ACD_PACKAGE:
+		default:
+			*omap_si_rev = DRA762_ACD_ES1_0;
+			break;
+		}
+	}
+}
+
 void omap_die_id(unsigned int *die_id)
 {
 	die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0);
diff --git a/arch/arm/mach-omap2/omap5/sdram.c b/arch/arm/mach-omap2/omap5/sdram.c
index 8fb962e39d..c0e0e0888c 100644
--- a/arch/arm/mach-omap2/omap5/sdram.c
+++ b/arch/arm/mach-omap2/omap5/sdram.c
@@ -481,6 +481,8 @@ void __weak emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
 		*size = ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_666MHz);
 		break;
 	case DRA762_ES1_0:
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
 	case DRA722_ES2_0:
 	case DRA722_ES2_1:
 		*regs = dra_ddr3_ext_phy_ctrl_const_base_666MHz_es2;
@@ -711,6 +713,8 @@ const struct read_write_regs *get_bug_regs(u32 *iterations)
 		*iterations = sizeof(omap5_bug_00339_regs)/
 			     sizeof(omap5_bug_00339_regs[0]);
 		break;
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
 	case DRA762_ES1_0:
 	case DRA752_ES1_0:
 	case DRA752_ES1_1:
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 6bcfa48231..41868822b1 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -285,6 +285,8 @@ void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
 			break;
 		}
 		break;
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
 	case DRA762_ES1_0:
 		if (emif_nr == 1)
 			*regs = &emif_1_regs_ddr3_666_mhz_1cs_dra76;
@@ -347,6 +349,8 @@ void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
 	ram_size = board_ti_get_emif_size();
 
 	switch (omap_revision()) {
+	case DRA762_ABZ_ES1_0:
+	case DRA762_ACD_ES1_0:
 	case DRA762_ES1_0:
 	case DRA752_ES1_0:
 	case DRA752_ES1_1:
@@ -655,8 +659,10 @@ int board_late_init(void)
 			name = "dra71x";
 		else
 			name = "dra72x";
-	} else if (is_dra76x()) {
-		name = "dra76x";
+	} else if (is_dra76x_abz()) {
+		name = "dra76x_abz";
+	} else if (is_dra76x_acd()) {
+		name = "dra76x_acd";
 	} else {
 		name = "dra7xx";
 	}
@@ -793,6 +799,7 @@ void recalibrate_iodelay(void)
 		iodelay = dra742_es1_1_iodelay_cfg_array;
 		niodelays = ARRAY_SIZE(dra742_es1_1_iodelay_cfg_array);
 		break;
+	case DRA762_ACD_ES1_0:
 	case DRA762_ES1_0:
 		pads = dra76x_core_padconf_array;
 		npads = ARRAY_SIZE(dra76x_core_padconf_array);
@@ -801,6 +808,7 @@ void recalibrate_iodelay(void)
 		break;
 	default:
 	case DRA752_ES2_0:
+	case DRA762_ABZ_ES1_0:
 		pads = dra74x_core_padconf_array;
 		npads = ARRAY_SIZE(dra74x_core_padconf_array);
 		iodelay = dra742_es2_0_iodelay_cfg_array;
@@ -1125,9 +1133,10 @@ int board_fit_config_name_match(const char *name)
 		} else if (!strcmp(name, "dra72-evm")) {
 			return 0;
 		}
-	} else if (is_dra76x() && !strcmp(name, "dra76-evm")) {
+	} else if (is_dra76x_acd() && !strcmp(name, "dra76-evm")) {
 		return 0;
-	} else if (!is_dra72x() && !is_dra76x() && !strcmp(name, "dra7-evm")) {
+	} else if (!is_dra72x() && !is_dra76x_acd() &&
+		   !strcmp(name, "dra7-evm")) {
 		return 0;
 	}
 
-- 
2.15.1

[U-Boot] [PATCH 07/13] board: ti: am574x-idk: Add epprom support

[Lokesh Vutla]

am574x-idk is a board based on TI's am574 processor
Add eeprom support.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/am57xx/board.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index f79aefd400..082346d2b1 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -43,6 +43,7 @@
 #define board_is_am572x_evm_reva3()	\
 				(board_ti_is("AM572PM_") && \
 				 !strncmp("A.30", board_ti_get_rev(), 3))
+#define board_is_am574x_idk()	board_ti_is("AM574IDK")
 #define board_is_am572x_idk()	board_ti_is("AM572IDK")
 #define board_is_am571x_idk()	board_ti_is("AM571IDK")
 
@@ -481,6 +482,8 @@ void do_board_detect(void)
 		bname = "BeagleBoard X15";
 	else if (board_is_am572x_evm())
 		bname = "AM572x EVM";
+	else if (board_is_am574x_idk())
+		bname = "AM574x IDK";
 	else if (board_is_am572x_idk())
 		bname = "AM572x IDK";
 	else if (board_is_am571x_idk())
@@ -513,6 +516,8 @@ static void setup_board_eeprom_env(void)
 			name = "am57xx_evm_reva3";
 		else
 			name = "am57xx_evm";
+	} else if (board_is_am574x_idk()) {
+		name = "am574x_idk";
 	} else if (board_is_am572x_idk()) {
 		name = "am572x_idk";
 	} else if (board_is_am571x_idk()) {
-- 
2.15.1

[U-Boot] [PATCH 08/13] board: ti: am574x-idk: Add hw data support

[Lokesh Vutla]

Update prcm, voltages support for am574x-idk.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/include/asm/omap_common.h | 1 +
 board/ti/am57xx/board.c            | 9 ++++++---
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 9624fb81fa..5710136e88 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -597,6 +597,7 @@ extern struct prcm_regs const dra7xx_prcm;
 extern struct dplls const **dplls_data;
 extern struct dplls dra7xx_dplls;
 extern struct dplls dra72x_dplls;
+extern struct dplls dra76x_dplls;
 extern struct vcores_data const **omap_vcores;
 extern const u32 sys_clk_array[8];
 extern struct omap_sys_ctrl_regs const **ctrl;
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 082346d2b1..2d14ae54fe 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -535,7 +535,7 @@ invalid_eeprom:
 
 void vcores_init(void)
 {
-	if (board_is_am572x_idk())
+	if (board_is_am572x_idk() || board_is_am574x_idk())
 		*omap_vcores = &am572x_idk_volts;
 	else if (board_is_am571x_idk())
 		*omap_vcores = &am571x_idk_volts;
@@ -548,6 +548,8 @@ void hw_data_init(void)
 	*prcm = &dra7xx_prcm;
 	if (is_dra72x())
 		*dplls_data = &dra72x_dplls;
+	else if (is_dra76x())
+		*dplls_data = &dra76x_dplls;
 	else
 		*dplls_data = &dra7xx_dplls;
 	*ctrl = &dra7xx_ctrl;
@@ -688,7 +690,7 @@ void recalibrate_iodelay(void)
 	int pconf_sz, iod_sz, delta_iod_sz = 0;
 	int ret;
 
-	if (board_is_am572x_idk()) {
+	if (board_is_am572x_idk() || board_is_am574x_idk()) {
 		pconf = core_padconf_array_essential_am572x_idk;
 		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
 		iod = iodelay_cfg_array_am572x_idk;
@@ -995,7 +997,8 @@ int board_eth_init(bd_t *bis)
 	writel(ctrl_val, (*ctrl)->control_core_control_io1);
 
 	/* The phy address for the AM57xx IDK are different than x15 */
-	if (board_is_am572x_idk() || board_is_am571x_idk()) {
+	if (board_is_am572x_idk() || board_is_am571x_idk() ||
+	    board_is_am574x_idk()) {
 		cpsw_data.slave_data[0].phy_addr = 0;
 		cpsw_data.slave_data[1].phy_addr = 1;
 	}
-- 
2.15.1

[U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support

[Lokesh Vutla]

AM574x-idk has the following DDR parts attached:
EMIF1: MT41K256M16HA (1GB with ECC)
EMIF2: MT41K256M16HA (1GB without ECC)

Enabling 2GB DDR without interleaving between EMIFs. And
enabling ECC on EMIF1.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
---
 board/ti/am57xx/board.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 3 deletions(-)

diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 2d14ae54fe..1377c7b1fe 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -89,10 +89,18 @@ static const struct dmm_lisa_map_regs am571x_idk_lisa_regs = {
 	.is_ma_present  = 0x1
 };
 
+static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
+	.dmm_lisa_map_2 = 0xc0600200,
+	.dmm_lisa_map_3 = 0x80600100,
+	.is_ma_present  = 0x1
+};
+
 void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
 {
 	if (board_is_am571x_idk())
 		*dmm_lisa_regs = &am571x_idk_lisa_regs;
+	else if (board_is_am574x_idk())
+		*dmm_lisa_regs = &am574x_idk_lisa_regs;
 	else
 		*dmm_lisa_regs = &beagle_x15_lisa_regs;
 }
@@ -231,8 +239,8 @@ static const struct emif_regs am571x_emif1_ddr3_666mhz_emif_regs = {
 	.ref_ctrl			= 0x0000514d,
 	.ref_ctrl_final			= 0x0000144a,
 	.sdram_tim1			= 0xd333887c,
-	.sdram_tim2			= 0x40b37fe3,
-	.sdram_tim3			= 0x409f8ada,
+	.sdram_tim2			= 0x30b37fe3,
+	.sdram_tim3			= 0x409f8ad8,
 	.read_idle_ctrl			= 0x00050000,
 	.zq_config			= 0x5007190b,
 	.temp_alert_config		= 0x00000000,
@@ -249,17 +257,50 @@ static const struct emif_regs am571x_emif1_ddr3_666mhz_emif_regs = {
 	.emif_rd_wr_exec_thresh		= 0x00000305
 };
 
+static const struct emif_regs am574x_emif1_ddr3_666mhz_emif_ecc_regs = {
+	.sdram_config_init		= 0x61863332,
+	.sdram_config			= 0x61863332,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl			= 0x0000514d,
+	.ref_ctrl_final			= 0x0000144a,
+	.sdram_tim1			= 0xd333887c,
+	.sdram_tim2			= 0x30b37fe3,
+	.sdram_tim3			= 0x409f8ad8,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x5007190b,
+	.temp_alert_config		= 0x00000000,
+	.emif_ddr_phy_ctlr_1_init	= 0x0024400f,
+	.emif_ddr_phy_ctlr_1		= 0x0e24400f,
+	.emif_ddr_ext_phy_ctrl_1	= 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2	= 0x00910091,
+	.emif_ddr_ext_phy_ctrl_3	= 0x00950095,
+	.emif_ddr_ext_phy_ctrl_4	= 0x009b009b,
+	.emif_ddr_ext_phy_ctrl_5	= 0x009e009e,
+	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
+	.emif_rd_wr_lvl_ctl		= 0x00000000,
+	.emif_rd_wr_exec_thresh		= 0x00000305,
+	.emif_ecc_ctrl_reg		= 0xD0000001,
+	.emif_ecc_address_range_1	= 0x3FFF0000,
+	.emif_ecc_address_range_2	= 0x00000000
+};
+
 void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
 {
 	switch (emif_nr) {
 	case 1:
 		if (board_is_am571x_idk())
 			*regs = &am571x_emif1_ddr3_666mhz_emif_regs;
+		else if (board_is_am574x_idk())
+			*regs = &am574x_emif1_ddr3_666mhz_emif_ecc_regs;
 		else
 			*regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs;
 		break;
 	case 2:
-		*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
+		if (board_is_am574x_idk())
+			*regs = &am571x_emif1_ddr3_666mhz_emif_regs;
+		else
+			*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
 		break;
 	}
 }
-- 
2.15.1

[U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support

[Lukasz Majewski]

Hi Lokesh,

> AM574x-idk has the following DDR parts attached:
> EMIF1: MT41K256M16HA (1GB with ECC)
> EMIF2: MT41K256M16HA (1GB without ECC)
> 
> Enabling 2GB DDR without interleaving between EMIFs. And
> enabling ECC on EMIF1.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
> ---
>  board/ti/am57xx/board.c | 47
> ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 44
> insertions(+), 3 deletions(-)
> 
> diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
> index 2d14ae54fe..1377c7b1fe 100644
> --- a/board/ti/am57xx/board.c
> +++ b/board/ti/am57xx/board.c
> @@ -89,10 +89,18 @@ static const struct dmm_lisa_map_regs
> am571x_idk_lisa_regs = { .is_ma_present  = 0x1
>  };
>  
> +static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
> +	.dmm_lisa_map_2 = 0xc0600200,
> +	.dmm_lisa_map_3 = 0x80600100,
> +	.is_ma_present  = 0x1
> +};
> +
>  void emif_get_dmm_regs(const struct dmm_lisa_map_regs
> **dmm_lisa_regs) {
>  	if (board_is_am571x_idk())
>  		*dmm_lisa_regs = &am571x_idk_lisa_regs;
> +	else if (board_is_am574x_idk())
> +		*dmm_lisa_regs = &am574x_idk_lisa_regs;
>  	else
>  		*dmm_lisa_regs = &beagle_x15_lisa_regs;
>  }
> @@ -231,8 +239,8 @@ static const struct emif_regs
> am571x_emif1_ddr3_666mhz_emif_regs =
> { .ref_ctrl			=
> 0x0000514d, .ref_ctrl_final			=
> 0x0000144a, .sdram_tim1			= 0xd333887c,
> -	.sdram_tim2			= 0x40b37fe3,
> -	.sdram_tim3			= 0x409f8ada,
> +	.sdram_tim2			= 0x30b37fe3,
> +	.sdram_tim3			= 0x409f8ad8,
>  	.read_idle_ctrl			= 0x00050000,
>  	.zq_config			= 0x5007190b,
>  	.temp_alert_config		= 0x00000000,
> @@ -249,17 +257,50 @@ static const struct emif_regs
> am571x_emif1_ddr3_666mhz_emif_regs =
> { .emif_rd_wr_exec_thresh		= 0x00000305 };
>  
> +static const struct emif_regs am574x_emif1_ddr3_666mhz_emif_ecc_regs
> = {
> +	.sdram_config_init		= 0x61863332,
> +	.sdram_config			= 0x61863332,
> +	.sdram_config2			= 0x08000000,
> +	.ref_ctrl			= 0x0000514d,
> +	.ref_ctrl_final			= 0x0000144a,
> +	.sdram_tim1			= 0xd333887c,
> +	.sdram_tim2			= 0x30b37fe3,
> +	.sdram_tim3			= 0x409f8ad8,
> +	.read_idle_ctrl			= 0x00050000,
> +	.zq_config			= 0x5007190b,
> +	.temp_alert_config		= 0x00000000,
> +	.emif_ddr_phy_ctlr_1_init	= 0x0024400f,
> +	.emif_ddr_phy_ctlr_1		= 0x0e24400f,
> +	.emif_ddr_ext_phy_ctrl_1	= 0x10040100,
> +	.emif_ddr_ext_phy_ctrl_2	= 0x00910091,
> +	.emif_ddr_ext_phy_ctrl_3	= 0x00950095,
> +	.emif_ddr_ext_phy_ctrl_4	= 0x009b009b,
> +	.emif_ddr_ext_phy_ctrl_5	= 0x009e009e,
> +	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
> +	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
> +	.emif_rd_wr_lvl_ctl		= 0x00000000,
> +	.emif_rd_wr_exec_thresh		= 0x00000305,
> +	.emif_ecc_ctrl_reg		= 0xD0000001,
> +	.emif_ecc_address_range_1	= 0x3FFF0000,
> +	.emif_ecc_address_range_2	= 0x00000000
> +};

I'm wondering if it would be possible to:

Embed this memory setup (even as binary blob) to SPL FIT -> Those
values are generated from TI supplied excel sheet (when memory details
are provided).


Pros:
----

- Since the same EMIF controller is used, one could only adjust the
  binary blob, when new memory (faster, slower, from other manufacturer)
  is used in the product.

- There would be no need to add such code to the board file.

> +
>  void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
>  {
>  	switch (emif_nr) {
>  	case 1:
>  		if (board_is_am571x_idk())
>  			*regs = &am571x_emif1_ddr3_666mhz_emif_regs;
> +		else if (board_is_am574x_idk())
> +			*regs =
> &am574x_emif1_ddr3_666mhz_emif_ecc_regs; else
>  			*regs =
> &beagle_x15_emif1_ddr3_532mhz_emif_regs; break;
>  	case 2:
> -		*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
> +		if (board_is_am574x_idk())
> +			*regs = &am571x_emif1_ddr3_666mhz_emif_regs;
> +		else
> +			*regs =
> &beagle_x15_emif2_ddr3_532mhz_emif_regs; break;
>  	}
>  }



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171218/1046041a/attachment.sig>

[U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support

[Lokesh Vutla]

Hi Lukas,

On Monday 18 December 2017 04:46 PM, Lukasz Majewski wrote:
> Hi Lokesh,
> 
>> AM574x-idk has the following DDR parts attached:
>> EMIF1: MT41K256M16HA (1GB with ECC)
>> EMIF2: MT41K256M16HA (1GB without ECC)
>>
>> Enabling 2GB DDR without interleaving between EMIFs. And
>> enabling ECC on EMIF1.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
>> ---
>>  board/ti/am57xx/board.c | 47
>> ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 44
>> insertions(+), 3 deletions(-)
>>
>> diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
>> index 2d14ae54fe..1377c7b1fe 100644
>> --- a/board/ti/am57xx/board.c
>> +++ b/board/ti/am57xx/board.c
>> @@ -89,10 +89,18 @@ static const struct dmm_lisa_map_regs
>> am571x_idk_lisa_regs = { .is_ma_present  = 0x1
>>  };
>>  
>> +static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
>> +	.dmm_lisa_map_2 = 0xc0600200,
>> +	.dmm_lisa_map_3 = 0x80600100,
>> +	.is_ma_present  = 0x1
>> +};
>> +
>>  void emif_get_dmm_regs(const struct dmm_lisa_map_regs
>> **dmm_lisa_regs) {
>>  	if (board_is_am571x_idk())
>>  		*dmm_lisa_regs = &am571x_idk_lisa_regs;
>> +	else if (board_is_am574x_idk())
>> +		*dmm_lisa_regs = &am574x_idk_lisa_regs;
>>  	else
>>  		*dmm_lisa_regs = &beagle_x15_lisa_regs;
>>  }
>> @@ -231,8 +239,8 @@ static const struct emif_regs
>> am571x_emif1_ddr3_666mhz_emif_regs =
>> { .ref_ctrl			=
>> 0x0000514d, .ref_ctrl_final			=
>> 0x0000144a, .sdram_tim1			= 0xd333887c,
>> -	.sdram_tim2			= 0x40b37fe3,
>> -	.sdram_tim3			= 0x409f8ada,
>> +	.sdram_tim2			= 0x30b37fe3,
>> +	.sdram_tim3			= 0x409f8ad8,
>>  	.read_idle_ctrl			= 0x00050000,
>>  	.zq_config			= 0x5007190b,
>>  	.temp_alert_config		= 0x00000000,
>> @@ -249,17 +257,50 @@ static const struct emif_regs
>> am571x_emif1_ddr3_666mhz_emif_regs =
>> { .emif_rd_wr_exec_thresh		= 0x00000305 };
>>  
>> +static const struct emif_regs am574x_emif1_ddr3_666mhz_emif_ecc_regs
>> = {
>> +	.sdram_config_init		= 0x61863332,
>> +	.sdram_config			= 0x61863332,
>> +	.sdram_config2			= 0x08000000,
>> +	.ref_ctrl			= 0x0000514d,
>> +	.ref_ctrl_final			= 0x0000144a,
>> +	.sdram_tim1			= 0xd333887c,
>> +	.sdram_tim2			= 0x30b37fe3,
>> +	.sdram_tim3			= 0x409f8ad8,
>> +	.read_idle_ctrl			= 0x00050000,
>> +	.zq_config			= 0x5007190b,
>> +	.temp_alert_config		= 0x00000000,
>> +	.emif_ddr_phy_ctlr_1_init	= 0x0024400f,
>> +	.emif_ddr_phy_ctlr_1		= 0x0e24400f,
>> +	.emif_ddr_ext_phy_ctrl_1	= 0x10040100,
>> +	.emif_ddr_ext_phy_ctrl_2	= 0x00910091,
>> +	.emif_ddr_ext_phy_ctrl_3	= 0x00950095,
>> +	.emif_ddr_ext_phy_ctrl_4	= 0x009b009b,
>> +	.emif_ddr_ext_phy_ctrl_5	= 0x009e009e,
>> +	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
>> +	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
>> +	.emif_rd_wr_lvl_ctl		= 0x00000000,
>> +	.emif_rd_wr_exec_thresh		= 0x00000305,
>> +	.emif_ecc_ctrl_reg		= 0xD0000001,
>> +	.emif_ecc_address_range_1	= 0x3FFF0000,
>> +	.emif_ecc_address_range_2	= 0x00000000
>> +};
> 
> I'm wondering if it would be possible to:
> 
> Embed this memory setup (even as binary blob) to SPL FIT -> Those
> values are generated from TI supplied excel sheet (when memory details
> are provided).
> 
> 
> Pros:
> ----
> 
> - Since the same EMIF controller is used, one could only adjust the
>   binary blob, when new memory (faster, slower, from other manufacturer)
>   is used in the product.
> 
> - There would be no need to add such code to the board file.

yeah, ddr is not the only thing that comes in this bucket, PMIC data as
well can be also made in similar way. I mean all the board related
information can be moved out. But then the binary size will still remain
the same. Also, we will need a new driver to parse these new binary formats.

As of now, the ddr excel sheet outputs the data in the $patch format, so
still sticking to this format.

Yeah, i agree that it would be nice if we can come up with the separate
binary for all board related info(i guess DT can be re used here).

Thanks and regards,
Lokesh

> 
>> +
>>  void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
>>  {
>>  	switch (emif_nr) {
>>  	case 1:
>>  		if (board_is_am571x_idk())
>>  			*regs = &am571x_emif1_ddr3_666mhz_emif_regs;
>> +		else if (board_is_am574x_idk())
>> +			*regs =
>> &am574x_emif1_ddr3_666mhz_emif_ecc_regs; else
>>  			*regs =
>> &beagle_x15_emif1_ddr3_532mhz_emif_regs; break;
>>  	case 2:
>> -		*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
>> +		if (board_is_am574x_idk())
>> +			*regs = &am571x_emif1_ddr3_666mhz_emif_regs;
>> +		else
>> +			*regs =
>> &beagle_x15_emif2_ddr3_532mhz_emif_regs; break;
>>  	}
>>  }
> 
> 
> 
> Best regards,
> 
> Lukasz Majewski
> 
> --
> 
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> 

[U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support

[Lukasz Majewski]

Hi Lokesh,

> Hi Lukas,
> 
> On Monday 18 December 2017 04:46 PM, Lukasz Majewski wrote:
> > Hi Lokesh,
> >   
> >> AM574x-idk has the following DDR parts attached:
> >> EMIF1: MT41K256M16HA (1GB with ECC)
> >> EMIF2: MT41K256M16HA (1GB without ECC)
> >>
> >> Enabling 2GB DDR without interleaving between EMIFs. And
> >> enabling ECC on EMIF1.
> >>
> >> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> >> Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
> >> ---
> >>  board/ti/am57xx/board.c | 47
> >> ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 44
> >> insertions(+), 3 deletions(-)
> >>
> >> diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
> >> index 2d14ae54fe..1377c7b1fe 100644
> >> --- a/board/ti/am57xx/board.c
> >> +++ b/board/ti/am57xx/board.c
> >> @@ -89,10 +89,18 @@ static const struct dmm_lisa_map_regs
> >> am571x_idk_lisa_regs = { .is_ma_present  = 0x1
> >>  };
> >>  
> >> +static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
> >> +	.dmm_lisa_map_2 = 0xc0600200,
> >> +	.dmm_lisa_map_3 = 0x80600100,
> >> +	.is_ma_present  = 0x1
> >> +};
> >> +
> >>  void emif_get_dmm_regs(const struct dmm_lisa_map_regs
> >> **dmm_lisa_regs) {
> >>  	if (board_is_am571x_idk())
> >>  		*dmm_lisa_regs = &am571x_idk_lisa_regs;
> >> +	else if (board_is_am574x_idk())
> >> +		*dmm_lisa_regs = &am574x_idk_lisa_regs;
> >>  	else
> >>  		*dmm_lisa_regs = &beagle_x15_lisa_regs;
> >>  }
> >> @@ -231,8 +239,8 @@ static const struct emif_regs
> >> am571x_emif1_ddr3_666mhz_emif_regs =
> >> { .ref_ctrl			=
> >> 0x0000514d, .ref_ctrl_final			=
> >> 0x0000144a, .sdram_tim1			= 0xd333887c,
> >> -	.sdram_tim2			= 0x40b37fe3,
> >> -	.sdram_tim3			= 0x409f8ada,
> >> +	.sdram_tim2			= 0x30b37fe3,
> >> +	.sdram_tim3			= 0x409f8ad8,
> >>  	.read_idle_ctrl			= 0x00050000,
> >>  	.zq_config			= 0x5007190b,
> >>  	.temp_alert_config		= 0x00000000,
> >> @@ -249,17 +257,50 @@ static const struct emif_regs
> >> am571x_emif1_ddr3_666mhz_emif_regs =
> >> { .emif_rd_wr_exec_thresh		= 0x00000305 };
> >>  
> >> +static const struct emif_regs
> >> am574x_emif1_ddr3_666mhz_emif_ecc_regs = {
> >> +	.sdram_config_init		= 0x61863332,
> >> +	.sdram_config			= 0x61863332,
> >> +	.sdram_config2			= 0x08000000,
> >> +	.ref_ctrl			= 0x0000514d,
> >> +	.ref_ctrl_final			= 0x0000144a,
> >> +	.sdram_tim1			= 0xd333887c,
> >> +	.sdram_tim2			= 0x30b37fe3,
> >> +	.sdram_tim3			= 0x409f8ad8,
> >> +	.read_idle_ctrl			= 0x00050000,
> >> +	.zq_config			= 0x5007190b,
> >> +	.temp_alert_config		= 0x00000000,
> >> +	.emif_ddr_phy_ctlr_1_init	= 0x0024400f,
> >> +	.emif_ddr_phy_ctlr_1		= 0x0e24400f,
> >> +	.emif_ddr_ext_phy_ctrl_1	= 0x10040100,
> >> +	.emif_ddr_ext_phy_ctrl_2	= 0x00910091,
> >> +	.emif_ddr_ext_phy_ctrl_3	= 0x00950095,
> >> +	.emif_ddr_ext_phy_ctrl_4	= 0x009b009b,
> >> +	.emif_ddr_ext_phy_ctrl_5	= 0x009e009e,
> >> +	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
> >> +	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
> >> +	.emif_rd_wr_lvl_ctl		= 0x00000000,
> >> +	.emif_rd_wr_exec_thresh		= 0x00000305,
> >> +	.emif_ecc_ctrl_reg		= 0xD0000001,
> >> +	.emif_ecc_address_range_1	= 0x3FFF0000,
> >> +	.emif_ecc_address_range_2	= 0x00000000
> >> +};  
> > 
> > I'm wondering if it would be possible to:
> > 
> > Embed this memory setup (even as binary blob) to SPL FIT -> Those
> > values are generated from TI supplied excel sheet (when memory
> > details are provided).
> > 
> > 
> > Pros:
> > ----
> > 
> > - Since the same EMIF controller is used, one could only adjust the
> >   binary blob, when new memory (faster, slower, from other
> > manufacturer) is used in the product.
> > 
> > - There would be no need to add such code to the board file.  
> 
> yeah, ddr is not the only thing that comes in this bucket, PMIC data
> as well can be also made in similar way. I mean all the board related
> information can be moved out.

I think that the EMIF controller configuration is a bit special.

As you pointed out - for the whole AM57xx family one EMIF controller
type is used.

> But then the binary size will still
> remain the same. 

The goal here would be to not make the binary smaller, but reducing the
maintanence effort.

Example use case - company X has a product. They are using single u-boot
(with SPL and dts). The only thing, which they need to change is the
data needed for setting up proper memory configuration (DDR2/DDR3,
speed - 1500, 1333, ECC enabled/disabled, module size, etc). This all is
done in EMIF.

With separate EMIF blob configuration they don't need to rebuild u-boot
- they only change memory configuration binary data.

This data has a separate room in the non-volatile memory (e.g. SPI-NOR
flash). 

> Also, we will need a new driver to parse these new
> binary formats.

EMIF configuration data is IIRC 128 B at most. It is even possible to
copy 1:1 the binary data to EMIF (as it is now done in the u-boot code).

Hence, the "driver" would boil down to "memcpy".

> 
> As of now, the ddr excel sheet outputs the data in the $patch format,
> so still sticking to this format.

As stated before, those Ctrl+C and Ctrl+V data are then copied (in for
loop) to the EMIF registers.

Why not wrap EMIF binary data to FIT, store on non-volatile memory and
on each reset read it and "just" copy this data to EMIF? As fallback we
can use the "from excel" structure.

> 
> Yeah, i agree that it would be nice if we can come up with the
> separate binary for all board related info(i guess DT can be re used
> here).

Not all board related info - just EMIF.

DT is not an option here - it would require re-flashing u-boot binary.

> 
> Thanks and regards,
> Lokesh
> 
> >   
> >> +
> >>  void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
> >>  {
> >>  	switch (emif_nr) {
> >>  	case 1:
> >>  		if (board_is_am571x_idk())
> >>  			*regs =
> >> &am571x_emif1_ddr3_666mhz_emif_regs;
> >> +		else if (board_is_am574x_idk())
> >> +			*regs =
> >> &am574x_emif1_ddr3_666mhz_emif_ecc_regs; else
> >>  			*regs =
> >> &beagle_x15_emif1_ddr3_532mhz_emif_regs; break;
> >>  	case 2:
> >> -		*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
> >> +		if (board_is_am574x_idk())
> >> +			*regs =
> >> &am571x_emif1_ddr3_666mhz_emif_regs;
> >> +		else
> >> +			*regs =
> >> &beagle_x15_emif2_ddr3_532mhz_emif_regs; break;
> >>  	}
> >>  }  
> > 
> > 
> > 
> > Best regards,
> > 
> > Lukasz Majewski
> > 
> > --
> > 
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email:
> > wd at denx.de 



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171219/50f8e859/attachment.sig>

[U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support

[Lokesh Vutla]

Hi Lukas,

Sorry for the delayed response.

On Tuesday 19 December 2017 03:04 PM, Lukasz Majewski wrote:
> Hi Lokesh,
> 
>> Hi Lukas,
>>
>> On Monday 18 December 2017 04:46 PM, Lukasz Majewski wrote:
>>> Hi Lokesh,
>>>   
>>>> AM574x-idk has the following DDR parts attached:
>>>> EMIF1: MT41K256M16HA (1GB with ECC)
>>>> EMIF2: MT41K256M16HA (1GB without ECC)
>>>>
>>>> Enabling 2GB DDR without interleaving between EMIFs. And
>>>> enabling ECC on EMIF1.
>>>>
>>>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>>>> Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
>>>> ---
>>>>  board/ti/am57xx/board.c | 47
>>>> ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 44
>>>> insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
>>>> index 2d14ae54fe..1377c7b1fe 100644
>>>> --- a/board/ti/am57xx/board.c
>>>> +++ b/board/ti/am57xx/board.c
>>>> @@ -89,10 +89,18 @@ static const struct dmm_lisa_map_regs
>>>> am571x_idk_lisa_regs = { .is_ma_present  = 0x1
>>>>  };
>>>>  
>>>> +static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
>>>> +	.dmm_lisa_map_2 = 0xc0600200,
>>>> +	.dmm_lisa_map_3 = 0x80600100,
>>>> +	.is_ma_present  = 0x1
>>>> +};
>>>> +
>>>>  void emif_get_dmm_regs(const struct dmm_lisa_map_regs
>>>> **dmm_lisa_regs) {
>>>>  	if (board_is_am571x_idk())
>>>>  		*dmm_lisa_regs = &am571x_idk_lisa_regs;
>>>> +	else if (board_is_am574x_idk())
>>>> +		*dmm_lisa_regs = &am574x_idk_lisa_regs;
>>>>  	else
>>>>  		*dmm_lisa_regs = &beagle_x15_lisa_regs;
>>>>  }
>>>> @@ -231,8 +239,8 @@ static const struct emif_regs
>>>> am571x_emif1_ddr3_666mhz_emif_regs =
>>>> { .ref_ctrl			=
>>>> 0x0000514d, .ref_ctrl_final			=
>>>> 0x0000144a, .sdram_tim1			= 0xd333887c,
>>>> -	.sdram_tim2			= 0x40b37fe3,
>>>> -	.sdram_tim3			= 0x409f8ada,
>>>> +	.sdram_tim2			= 0x30b37fe3,
>>>> +	.sdram_tim3			= 0x409f8ad8,
>>>>  	.read_idle_ctrl			= 0x00050000,
>>>>  	.zq_config			= 0x5007190b,
>>>>  	.temp_alert_config		= 0x00000000,
>>>> @@ -249,17 +257,50 @@ static const struct emif_regs
>>>> am571x_emif1_ddr3_666mhz_emif_regs =
>>>> { .emif_rd_wr_exec_thresh		= 0x00000305 };
>>>>  
>>>> +static const struct emif_regs
>>>> am574x_emif1_ddr3_666mhz_emif_ecc_regs = {
>>>> +	.sdram_config_init		= 0x61863332,
>>>> +	.sdram_config			= 0x61863332,
>>>> +	.sdram_config2			= 0x08000000,
>>>> +	.ref_ctrl			= 0x0000514d,
>>>> +	.ref_ctrl_final			= 0x0000144a,
>>>> +	.sdram_tim1			= 0xd333887c,
>>>> +	.sdram_tim2			= 0x30b37fe3,
>>>> +	.sdram_tim3			= 0x409f8ad8,
>>>> +	.read_idle_ctrl			= 0x00050000,
>>>> +	.zq_config			= 0x5007190b,
>>>> +	.temp_alert_config		= 0x00000000,
>>>> +	.emif_ddr_phy_ctlr_1_init	= 0x0024400f,
>>>> +	.emif_ddr_phy_ctlr_1		= 0x0e24400f,
>>>> +	.emif_ddr_ext_phy_ctrl_1	= 0x10040100,
>>>> +	.emif_ddr_ext_phy_ctrl_2	= 0x00910091,
>>>> +	.emif_ddr_ext_phy_ctrl_3	= 0x00950095,
>>>> +	.emif_ddr_ext_phy_ctrl_4	= 0x009b009b,
>>>> +	.emif_ddr_ext_phy_ctrl_5	= 0x009e009e,
>>>> +	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
>>>> +	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
>>>> +	.emif_rd_wr_lvl_ctl		= 0x00000000,
>>>> +	.emif_rd_wr_exec_thresh		= 0x00000305,
>>>> +	.emif_ecc_ctrl_reg		= 0xD0000001,
>>>> +	.emif_ecc_address_range_1	= 0x3FFF0000,
>>>> +	.emif_ecc_address_range_2	= 0x00000000
>>>> +};  
>>>
>>> I'm wondering if it would be possible to:
>>>
>>> Embed this memory setup (even as binary blob) to SPL FIT -> Those
>>> values are generated from TI supplied excel sheet (when memory
>>> details are provided).
>>>
>>>
>>> Pros:
>>> ----
>>>
>>> - Since the same EMIF controller is used, one could only adjust the
>>>   binary blob, when new memory (faster, slower, from other
>>> manufacturer) is used in the product.
>>>
>>> - There would be no need to add such code to the board file.  
>>
>> yeah, ddr is not the only thing that comes in this bucket, PMIC data
>> as well can be also made in similar way. I mean all the board related
>> information can be moved out.
> 
> I think that the EMIF controller configuration is a bit special.
> 
> As you pointed out - for the whole AM57xx family one EMIF controller
> type is used.
> 
>> But then the binary size will still
>> remain the same. 
> 
> The goal here would be to not make the binary smaller, but reducing the
> maintanence effort.
> 
> Example use case - company X has a product. They are using single u-boot
> (with SPL and dts). The only thing, which they need to change is the
> data needed for setting up proper memory configuration (DDR2/DDR3,
> speed - 1500, 1333, ECC enabled/disabled, module size, etc). This all is
> done in EMIF.
> 
> With separate EMIF blob configuration they don't need to rebuild u-boot
> - they only change memory configuration binary data.
> 
> This data has a separate room in the non-volatile memory (e.g. SPI-NOR
> flash). 
> 
>> Also, we will need a new driver to parse these new
>> binary formats.
> 
> EMIF configuration data is IIRC 128 B at most. It is even possible to
> copy 1:1 the binary data to EMIF (as it is now done in the u-boot code).
> 
> Hence, the "driver" would boil down to "memcpy".


Agreed. This should be doable. Tom, do you have any comments on this new
sequence?


On a side node, I will post a v2 for this series with the existing data.
Cleanup can be done for the entire supported boards once the above
discussion is concluded.


Thanks and regards,
Lokesh

[U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support

[Lukasz Majewski]

Hi Lokesh,

> Hi Lukas,
> 
> Sorry for the delayed response.

No problem :-). Happy new year :-)

> 
> On Tuesday 19 December 2017 03:04 PM, Lukasz Majewski wrote:
> > Hi Lokesh,
> >   
> >> Hi Lukas,
> >>
> >> On Monday 18 December 2017 04:46 PM, Lukasz Majewski wrote:  
> >>> Hi Lokesh,
> >>>     
> >>>> AM574x-idk has the following DDR parts attached:
> >>>> EMIF1: MT41K256M16HA (1GB with ECC)
> >>>> EMIF2: MT41K256M16HA (1GB without ECC)
> >>>>
> >>>> Enabling 2GB DDR without interleaving between EMIFs. And
> >>>> enabling ECC on EMIF1.
> >>>>
> >>>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> >>>> Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
> >>>> ---
> >>>>  board/ti/am57xx/board.c | 47
> >>>> ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed,
> >>>> 44 insertions(+), 3 deletions(-)
> >>>>
> >>>> diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
> >>>> index 2d14ae54fe..1377c7b1fe 100644
> >>>> --- a/board/ti/am57xx/board.c
> >>>> +++ b/board/ti/am57xx/board.c
> >>>> @@ -89,10 +89,18 @@ static const struct dmm_lisa_map_regs
> >>>> am571x_idk_lisa_regs = { .is_ma_present  = 0x1
> >>>>  };
> >>>>  
> >>>> +static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
> >>>> +	.dmm_lisa_map_2 = 0xc0600200,
> >>>> +	.dmm_lisa_map_3 = 0x80600100,
> >>>> +	.is_ma_present  = 0x1
> >>>> +};
> >>>> +
> >>>>  void emif_get_dmm_regs(const struct dmm_lisa_map_regs
> >>>> **dmm_lisa_regs) {
> >>>>  	if (board_is_am571x_idk())
> >>>>  		*dmm_lisa_regs = &am571x_idk_lisa_regs;
> >>>> +	else if (board_is_am574x_idk())
> >>>> +		*dmm_lisa_regs = &am574x_idk_lisa_regs;
> >>>>  	else
> >>>>  		*dmm_lisa_regs = &beagle_x15_lisa_regs;
> >>>>  }
> >>>> @@ -231,8 +239,8 @@ static const struct emif_regs
> >>>> am571x_emif1_ddr3_666mhz_emif_regs =
> >>>> { .ref_ctrl			=
> >>>> 0x0000514d, .ref_ctrl_final			=
> >>>> 0x0000144a, .sdram_tim1			= 0xd333887c,
> >>>> -	.sdram_tim2			= 0x40b37fe3,
> >>>> -	.sdram_tim3			= 0x409f8ada,
> >>>> +	.sdram_tim2			= 0x30b37fe3,
> >>>> +	.sdram_tim3			= 0x409f8ad8,
> >>>>  	.read_idle_ctrl			= 0x00050000,
> >>>>  	.zq_config			= 0x5007190b,
> >>>>  	.temp_alert_config		= 0x00000000,
> >>>> @@ -249,17 +257,50 @@ static const struct emif_regs
> >>>> am571x_emif1_ddr3_666mhz_emif_regs =
> >>>> { .emif_rd_wr_exec_thresh		= 0x00000305 };
> >>>>  
> >>>> +static const struct emif_regs
> >>>> am574x_emif1_ddr3_666mhz_emif_ecc_regs = {
> >>>> +	.sdram_config_init		= 0x61863332,
> >>>> +	.sdram_config			= 0x61863332,
> >>>> +	.sdram_config2			= 0x08000000,
> >>>> +	.ref_ctrl			= 0x0000514d,
> >>>> +	.ref_ctrl_final			= 0x0000144a,
> >>>> +	.sdram_tim1			= 0xd333887c,
> >>>> +	.sdram_tim2			= 0x30b37fe3,
> >>>> +	.sdram_tim3			= 0x409f8ad8,
> >>>> +	.read_idle_ctrl			= 0x00050000,
> >>>> +	.zq_config			= 0x5007190b,
> >>>> +	.temp_alert_config		= 0x00000000,
> >>>> +	.emif_ddr_phy_ctlr_1_init	= 0x0024400f,
> >>>> +	.emif_ddr_phy_ctlr_1		= 0x0e24400f,
> >>>> +	.emif_ddr_ext_phy_ctrl_1	= 0x10040100,
> >>>> +	.emif_ddr_ext_phy_ctrl_2	= 0x00910091,
> >>>> +	.emif_ddr_ext_phy_ctrl_3	= 0x00950095,
> >>>> +	.emif_ddr_ext_phy_ctrl_4	= 0x009b009b,
> >>>> +	.emif_ddr_ext_phy_ctrl_5	= 0x009e009e,
> >>>> +	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
> >>>> +	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
> >>>> +	.emif_rd_wr_lvl_ctl		= 0x00000000,
> >>>> +	.emif_rd_wr_exec_thresh		= 0x00000305,
> >>>> +	.emif_ecc_ctrl_reg		= 0xD0000001,
> >>>> +	.emif_ecc_address_range_1	= 0x3FFF0000,
> >>>> +	.emif_ecc_address_range_2	= 0x00000000
> >>>> +};    
> >>>
> >>> I'm wondering if it would be possible to:
> >>>
> >>> Embed this memory setup (even as binary blob) to SPL FIT -> Those
> >>> values are generated from TI supplied excel sheet (when memory
> >>> details are provided).
> >>>
> >>>
> >>> Pros:
> >>> ----
> >>>
> >>> - Since the same EMIF controller is used, one could only adjust
> >>> the binary blob, when new memory (faster, slower, from other
> >>> manufacturer) is used in the product.
> >>>
> >>> - There would be no need to add such code to the board file.    
> >>
> >> yeah, ddr is not the only thing that comes in this bucket, PMIC
> >> data as well can be also made in similar way. I mean all the board
> >> related information can be moved out.  
> > 
> > I think that the EMIF controller configuration is a bit special.
> > 
> > As you pointed out - for the whole AM57xx family one EMIF controller
> > type is used.
> >   
> >> But then the binary size will still
> >> remain the same.   
> > 
> > The goal here would be to not make the binary smaller, but reducing
> > the maintanence effort.
> > 
> > Example use case - company X has a product. They are using single
> > u-boot (with SPL and dts). The only thing, which they need to
> > change is the data needed for setting up proper memory
> > configuration (DDR2/DDR3, speed - 1500, 1333, ECC enabled/disabled,
> > module size, etc). This all is done in EMIF.
> > 
> > With separate EMIF blob configuration they don't need to rebuild
> > u-boot
> > - they only change memory configuration binary data.
> > 
> > This data has a separate room in the non-volatile memory (e.g.
> > SPI-NOR flash). 
> >   
> >> Also, we will need a new driver to parse these new
> >> binary formats.  
> > 
> > EMIF configuration data is IIRC 128 B at most. It is even possible
> > to copy 1:1 the binary data to EMIF (as it is now done in the
> > u-boot code).
> > 
> > Hence, the "driver" would boil down to "memcpy".  
> 
> 
> Agreed. This should be doable. Tom, do you have any comments on this
> new sequence?

Ok. Lets wait for Tom's opinion.

> 
> 
> On a side node, I will post a v2 for this series with the existing
> data. Cleanup can be done for the entire supported boards once the
> above discussion is concluded.
> 
> 
> Thanks and regards,
> Lokesh



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180102/08e4f552/attachment.sig>

[U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support

[Tom Rini]

On Fri, Dec 29, 2017 at 11:47:27AM +0530, Lokesh Vutla wrote:
> Hi Lukas,
> 
> Sorry for the delayed response.
> 
> On Tuesday 19 December 2017 03:04 PM, Lukasz Majewski wrote:
> > Hi Lokesh,
> > 
> >> Hi Lukas,
> >>
> >> On Monday 18 December 2017 04:46 PM, Lukasz Majewski wrote:
> >>> Hi Lokesh,
> >>>   
> >>>> AM574x-idk has the following DDR parts attached:
> >>>> EMIF1: MT41K256M16HA (1GB with ECC)
> >>>> EMIF2: MT41K256M16HA (1GB without ECC)
> >>>>
> >>>> Enabling 2GB DDR without interleaving between EMIFs. And
> >>>> enabling ECC on EMIF1.
> >>>>
> >>>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> >>>> Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
> >>>> ---
> >>>>  board/ti/am57xx/board.c | 47
> >>>> ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 44
> >>>> insertions(+), 3 deletions(-)
> >>>>
> >>>> diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
> >>>> index 2d14ae54fe..1377c7b1fe 100644
> >>>> --- a/board/ti/am57xx/board.c
> >>>> +++ b/board/ti/am57xx/board.c
> >>>> @@ -89,10 +89,18 @@ static const struct dmm_lisa_map_regs
> >>>> am571x_idk_lisa_regs = { .is_ma_present  = 0x1
> >>>>  };
> >>>>  
> >>>> +static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
> >>>> +	.dmm_lisa_map_2 = 0xc0600200,
> >>>> +	.dmm_lisa_map_3 = 0x80600100,
> >>>> +	.is_ma_present  = 0x1
> >>>> +};
> >>>> +
> >>>>  void emif_get_dmm_regs(const struct dmm_lisa_map_regs
> >>>> **dmm_lisa_regs) {
> >>>>  	if (board_is_am571x_idk())
> >>>>  		*dmm_lisa_regs = &am571x_idk_lisa_regs;
> >>>> +	else if (board_is_am574x_idk())
> >>>> +		*dmm_lisa_regs = &am574x_idk_lisa_regs;
> >>>>  	else
> >>>>  		*dmm_lisa_regs = &beagle_x15_lisa_regs;
> >>>>  }
> >>>> @@ -231,8 +239,8 @@ static const struct emif_regs
> >>>> am571x_emif1_ddr3_666mhz_emif_regs =
> >>>> { .ref_ctrl			=
> >>>> 0x0000514d, .ref_ctrl_final			=
> >>>> 0x0000144a, .sdram_tim1			= 0xd333887c,
> >>>> -	.sdram_tim2			= 0x40b37fe3,
> >>>> -	.sdram_tim3			= 0x409f8ada,
> >>>> +	.sdram_tim2			= 0x30b37fe3,
> >>>> +	.sdram_tim3			= 0x409f8ad8,
> >>>>  	.read_idle_ctrl			= 0x00050000,
> >>>>  	.zq_config			= 0x5007190b,
> >>>>  	.temp_alert_config		= 0x00000000,
> >>>> @@ -249,17 +257,50 @@ static const struct emif_regs
> >>>> am571x_emif1_ddr3_666mhz_emif_regs =
> >>>> { .emif_rd_wr_exec_thresh		= 0x00000305 };
> >>>>  
> >>>> +static const struct emif_regs
> >>>> am574x_emif1_ddr3_666mhz_emif_ecc_regs = {
> >>>> +	.sdram_config_init		= 0x61863332,
> >>>> +	.sdram_config			= 0x61863332,
> >>>> +	.sdram_config2			= 0x08000000,
> >>>> +	.ref_ctrl			= 0x0000514d,
> >>>> +	.ref_ctrl_final			= 0x0000144a,
> >>>> +	.sdram_tim1			= 0xd333887c,
> >>>> +	.sdram_tim2			= 0x30b37fe3,
> >>>> +	.sdram_tim3			= 0x409f8ad8,
> >>>> +	.read_idle_ctrl			= 0x00050000,
> >>>> +	.zq_config			= 0x5007190b,
> >>>> +	.temp_alert_config		= 0x00000000,
> >>>> +	.emif_ddr_phy_ctlr_1_init	= 0x0024400f,
> >>>> +	.emif_ddr_phy_ctlr_1		= 0x0e24400f,
> >>>> +	.emif_ddr_ext_phy_ctrl_1	= 0x10040100,
> >>>> +	.emif_ddr_ext_phy_ctrl_2	= 0x00910091,
> >>>> +	.emif_ddr_ext_phy_ctrl_3	= 0x00950095,
> >>>> +	.emif_ddr_ext_phy_ctrl_4	= 0x009b009b,
> >>>> +	.emif_ddr_ext_phy_ctrl_5	= 0x009e009e,
> >>>> +	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
> >>>> +	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
> >>>> +	.emif_rd_wr_lvl_ctl		= 0x00000000,
> >>>> +	.emif_rd_wr_exec_thresh		= 0x00000305,
> >>>> +	.emif_ecc_ctrl_reg		= 0xD0000001,
> >>>> +	.emif_ecc_address_range_1	= 0x3FFF0000,
> >>>> +	.emif_ecc_address_range_2	= 0x00000000
> >>>> +};  
> >>>
> >>> I'm wondering if it would be possible to:
> >>>
> >>> Embed this memory setup (even as binary blob) to SPL FIT -> Those
> >>> values are generated from TI supplied excel sheet (when memory
> >>> details are provided).
> >>>
> >>>
> >>> Pros:
> >>> ----
> >>>
> >>> - Since the same EMIF controller is used, one could only adjust the
> >>>   binary blob, when new memory (faster, slower, from other
> >>> manufacturer) is used in the product.
> >>>
> >>> - There would be no need to add such code to the board file.  
> >>
> >> yeah, ddr is not the only thing that comes in this bucket, PMIC data
> >> as well can be also made in similar way. I mean all the board related
> >> information can be moved out.
> > 
> > I think that the EMIF controller configuration is a bit special.
> > 
> > As you pointed out - for the whole AM57xx family one EMIF controller
> > type is used.
> > 
> >> But then the binary size will still
> >> remain the same. 
> > 
> > The goal here would be to not make the binary smaller, but reducing the
> > maintanence effort.
> > 
> > Example use case - company X has a product. They are using single u-boot
> > (with SPL and dts). The only thing, which they need to change is the
> > data needed for setting up proper memory configuration (DDR2/DDR3,
> > speed - 1500, 1333, ECC enabled/disabled, module size, etc). This all is
> > done in EMIF.
> > 
> > With separate EMIF blob configuration they don't need to rebuild u-boot
> > - they only change memory configuration binary data.
> > 
> > This data has a separate room in the non-volatile memory (e.g. SPI-NOR
> > flash). 
> > 
> >> Also, we will need a new driver to parse these new
> >> binary formats.
> > 
> > EMIF configuration data is IIRC 128 B at most. It is even possible to
> > copy 1:1 the binary data to EMIF (as it is now done in the u-boot code).
> > 
> > Hence, the "driver" would boil down to "memcpy".
> 
> 
> Agreed. This should be doable. Tom, do you have any comments on this new
> sequence?

Sorry for the delayed response.  I'm not sure this is a good idea, at
least not without seeing a patch doing it.  While a lot of this data is
fairly opaque, the structs that say field X is value Y is helpful at
times when debugging the odd problem.  And there's always the
programming sequence issues as well.  So, I guess I'd have to see a
patch where moving in this direction really does make life easier /
cleaner to be convinced it's a good idea.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180110/39ef3e69/attachment.sig>

[U-Boot] [PATCH 10/13] board: ti: am574x-idk: Update pinmux using latest PMT

[Lokesh Vutla]

Update the board pinmux for AM574x-IDK board using latest PMT[1] and the
board files named am574x_idk_v1p3b_sr2p0 that were auto generated on
13th October, 2017 by "Ahmad Rashed <a-rashed@ti.com>".

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/am57xx/board.c    |   7 +-
 board/ti/am57xx/mux_data.h | 299 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 305 insertions(+), 1 deletion(-)

diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 1377c7b1fe..8862ee932c 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -731,11 +731,16 @@ void recalibrate_iodelay(void)
 	int pconf_sz, iod_sz, delta_iod_sz = 0;
 	int ret;
 
-	if (board_is_am572x_idk() || board_is_am574x_idk()) {
+	if (board_is_am572x_idk()) {
 		pconf = core_padconf_array_essential_am572x_idk;
 		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
 		iod = iodelay_cfg_array_am572x_idk;
 		iod_sz = ARRAY_SIZE(iodelay_cfg_array_am572x_idk);
+	} else if (board_is_am574x_idk()) {
+		pconf = core_padconf_array_essential_am574x_idk;
+		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am574x_idk);
+		iod = iodelay_cfg_array_am574x_idk;
+		iod_sz = ARRAY_SIZE(iodelay_cfg_array_am574x_idk);
 	} else if (board_is_am571x_idk()) {
 		pconf = core_padconf_array_essential_am571x_idk;
 		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am571x_idk);
diff --git a/board/ti/am57xx/mux_data.h b/board/ti/am57xx/mux_data.h
index b4a71bd7c8..a48f681840 100644
--- a/board/ti/am57xx/mux_data.h
+++ b/board/ti/am57xx/mux_data.h
@@ -298,6 +298,226 @@ const struct pad_conf_entry core_padconf_array_delta_x15_sr2_0[] = {
 	{VOUT1_D23, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d23.vout1_d23 */
 };
 
+const struct pad_conf_entry core_padconf_array_essential_am574x_idk[] = {
+	{GPMC_A0, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a0.vin4b_d0 */
+	{GPMC_A1, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a1.vin4b_d1 */
+	{GPMC_A2, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a2.vin4b_d2 */
+	{GPMC_A3, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a3.vin4b_d3 */
+	{GPMC_A4, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a4.vin4b_d4 */
+	{GPMC_A5, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a5.vin4b_d5 */
+	{GPMC_A6, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a6.vin4b_d6 */
+	{GPMC_A7, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a7.vin4b_d7 */
+	{GPMC_A8, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a8.vin4b_hsync1 */
+	{GPMC_A9, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a9.vin4b_vsync1 */
+	{GPMC_A10, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a10.vin4b_clk1 */
+	{GPMC_A11, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a11.vin4b_de1 */
+	{GPMC_A12, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a12.vin4b_fld1 */
+	{GPMC_A13, (M1 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a13.qspi1_rtclk */
+	{GPMC_A14, (M1 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a14.qspi1_d3 */
+	{GPMC_A15, (M1 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a15.qspi1_d2 */
+	{GPMC_A16, (M1 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a16.qspi1_d0 */
+	{GPMC_A17, (M1 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a17.qspi1_d1 */
+	{GPMC_A18, (M1 | PIN_OUTPUT | MANUAL_MODE)},	/* gpmc_a18.qspi1_sclk */
+	{GPMC_A19, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a19.mmc2_dat4 */
+	{GPMC_A20, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a20.mmc2_dat5 */
+	{GPMC_A21, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a21.mmc2_dat6 */
+	{GPMC_A22, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a22.mmc2_dat7 */
+	{GPMC_A23, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a23.mmc2_clk */
+	{GPMC_A24, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a24.mmc2_dat0 */
+	{GPMC_A25, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a25.mmc2_dat1 */
+	{GPMC_A26, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a26.mmc2_dat2 */
+	{GPMC_A27, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a27.mmc2_dat3 */
+	{GPMC_CS1, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_cs1.mmc2_cmd */
+	{GPMC_CS2, (M1 | PIN_OUTPUT | MANUAL_MODE)},	/* gpmc_cs2.qspi1_cs0 */
+	{VIN1A_D5, (M14 | PIN_OUTPUT)},	/* vin1a_d5.gpio3_9 */
+	{VIN1A_D6, (M14 | PIN_OUTPUT)},	/* vin1a_d6.gpio3_10 */
+	{VIN1A_D7, (M14 | PIN_OUTPUT)},	/* vin1a_d7.gpio3_11 */
+	{VIN1A_D8, (M14 | PIN_OUTPUT)},	/* vin1a_d8.gpio3_12 */
+	{VIN1A_D10, (M14 | PIN_INPUT_PULLDOWN)},	/* vin1a_d10.gpio3_14 */
+	{VIN1A_D12, (M14 | PIN_INPUT)},	/* vin1a_d12.gpio3_16 */
+	{VIN1A_D13, (M14 | PIN_OUTPUT)},	/* vin1a_d13.gpio3_17 */
+	{VIN1A_D14, (M14 | PIN_OUTPUT)},	/* vin1a_d14.gpio3_18 */
+	{VIN1A_D15, (M14 | PIN_OUTPUT)},	/* vin1a_d15.gpio3_19 */
+	{VIN1A_D17, (M14 | PIN_OUTPUT)},	/* vin1a_d17.gpio3_21 */
+	{VIN1A_D18, (M14 | PIN_OUTPUT_PULLDOWN)},	/* vin1a_d18.gpio3_22 */
+	{VIN1A_D19, (M14 | PIN_OUTPUT_PULLUP)},	/* vin1a_d19.gpio3_23 */
+	{VIN1A_D22, (M14 | PIN_INPUT)},	/* vin1a_d22.gpio3_26 */
+	{VIN2A_CLK0, (M14 | PIN_INPUT_PULLUP)},	/* vin2a_clk0.gpio3_28 */
+	{VIN2A_DE0, (M14 | PIN_INPUT_PULLUP)},	/* vin2a_de0.gpio3_29 */
+	{VIN2A_FLD0, (M14 | PIN_INPUT_PULLUP)},	/* vin2a_fld0.gpio3_30 */
+	{VIN2A_HSYNC0, (M14 | PIN_INPUT_PULLUP)},	/* vin2a_hsync0.gpio3_31 */
+	{VIN2A_VSYNC0, (M14 | PIN_INPUT)},	/* vin2a_vsync0.gpio4_0 */
+	{VIN2A_D0, (M11 | PIN_INPUT)},	/* vin2a_d0.pr1_uart0_rxd */
+	{VIN2A_D1, (M11 | PIN_OUTPUT)},	/* vin2a_d1.pr1_uart0_txd */
+	{VIN2A_D2, (M10 | PIN_OUTPUT)},	/* vin2a_d2.eCAP1_in_PWM1_out */
+	{VIN2A_D3, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d3.pr1_edc_latch0_in */
+	{VIN2A_D4, (M11 | PIN_OUTPUT)},	/* vin2a_d4.pr1_edc_sync0_out */
+	{VIN2A_D5, (M13 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d5.pr1_pru1_gpo2 */
+	{VIN2A_D10, (M11 | PIN_OUTPUT_PULLDOWN)},	/* vin2a_d10.pr1_mdio_mdclk */
+	{VIN2A_D11, (M11 | PIN_INPUT)},	/* vin2a_d11.pr1_mdio_data */
+	{VIN2A_D12, (M3 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d12.rgmii1_txc */
+	{VIN2A_D13, (M3 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d13.rgmii1_txctl */
+	{VIN2A_D14, (M3 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d14.rgmii1_txd3 */
+	{VIN2A_D15, (M3 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d15.rgmii1_txd2 */
+	{VIN2A_D16, (M3 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d16.rgmii1_txd1 */
+	{VIN2A_D17, (M3 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d17.rgmii1_txd0 */
+	{VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d18.rgmii1_rxc */
+	{VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d19.rgmii1_rxctl */
+	{VIN2A_D20, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d20.rgmii1_rxd3 */
+	{VIN2A_D21, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d21.rgmii1_rxd2 */
+	{VIN2A_D22, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d22.rgmii1_rxd1 */
+	{VIN2A_D23, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d23.rgmii1_rxd0 */
+	{VOUT1_CLK, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_clk.vout1_clk */
+	{VOUT1_DE, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_de.vout1_de */
+	{VOUT1_FLD, (M14 | PIN_OUTPUT)},	/* vout1_fld.gpio4_21 */
+	{VOUT1_HSYNC, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_hsync.vout1_hsync */
+	{VOUT1_VSYNC, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_vsync.vout1_vsync */
+	{VOUT1_D0, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d0.vout1_d0 */
+	{VOUT1_D1, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d1.vout1_d1 */
+	{VOUT1_D2, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d2.vout1_d2 */
+	{VOUT1_D3, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d3.vout1_d3 */
+	{VOUT1_D4, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d4.vout1_d4 */
+	{VOUT1_D5, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d5.vout1_d5 */
+	{VOUT1_D6, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d6.vout1_d6 */
+	{VOUT1_D7, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d7.vout1_d7 */
+	{VOUT1_D8, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d8.vout1_d8 */
+	{VOUT1_D9, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d9.vout1_d9 */
+	{VOUT1_D10, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d10.vout1_d10 */
+	{VOUT1_D11, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d11.vout1_d11 */
+	{VOUT1_D12, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d12.vout1_d12 */
+	{VOUT1_D13, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d13.vout1_d13 */
+	{VOUT1_D14, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d14.vout1_d14 */
+	{VOUT1_D15, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d15.vout1_d15 */
+	{VOUT1_D16, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d16.vout1_d16 */
+	{VOUT1_D17, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d17.vout1_d17 */
+	{VOUT1_D18, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d18.vout1_d18 */
+	{VOUT1_D19, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d19.vout1_d19 */
+	{VOUT1_D20, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d20.vout1_d20 */
+	{VOUT1_D21, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d21.vout1_d21 */
+	{VOUT1_D22, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d22.vout1_d22 */
+	{VOUT1_D23, (M0 | PIN_OUTPUT | SLEWCONTROL | MANUAL_MODE)},	/* vout1_d23.vout1_d23 */
+	{MDIO_MCLK, (M0 | PIN_INPUT_SLEW)},	/* mdio_mclk.mdio_mclk */
+	{MDIO_D, (M0 | PIN_INPUT | SLEWCONTROL)},	/* mdio_d.mdio_d */
+	{RGMII0_TXC, (M0 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txc.rgmii0_txc */
+	{RGMII0_TXCTL, (M0 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txctl.rgmii0_txctl */
+	{RGMII0_TXD3, (M0 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txd3.rgmii0_txd3 */
+	{RGMII0_TXD2, (M0 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txd2.rgmii0_txd2 */
+	{RGMII0_TXD1, (M0 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txd1.rgmii0_txd1 */
+	{RGMII0_TXD0, (M0 | PIN_OUTPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txd0.rgmii0_txd0 */
+	{RGMII0_RXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_rxc.rgmii0_rxc */
+	{RGMII0_RXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_rxctl.rgmii0_rxctl */
+	{RGMII0_RXD3, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* rgmii0_rxd3.rgmii0_rxd3 */
+	{RGMII0_RXD2, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* rgmii0_rxd2.rgmii0_rxd2 */
+	{RGMII0_RXD1, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* rgmii0_rxd1.rgmii0_rxd1 */
+	{RGMII0_RXD0, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* rgmii0_rxd0.rgmii0_rxd0 */
+	{USB1_DRVVBUS, (M0 | PIN_OUTPUT | SLEWCONTROL)},	/* usb1_drvvbus.usb1_drvvbus */
+	{USB2_DRVVBUS, (M0 | PIN_OUTPUT | SLEWCONTROL)},	/* usb2_drvvbus.usb2_drvvbus */
+	{GPIO6_14, (M0 | PIN_OUTPUT)},	/* gpio6_14.gpio6_14 */
+	{GPIO6_15, (M0 | PIN_OUTPUT)},	/* gpio6_15.gpio6_15 */
+	{GPIO6_16, (M0 | PIN_INPUT_PULLUP)},	/* gpio6_16.gpio6_16 */
+	{XREF_CLK0, (M11 | PIN_INPUT_PULLDOWN)},	/* xref_clk0.pr2_mii1_col */
+	{XREF_CLK1, (M11 | PIN_INPUT_PULLDOWN)},	/* xref_clk1.pr2_mii1_crs */
+	{XREF_CLK2, (M14 | PIN_OUTPUT)},	/* xref_clk2.gpio6_19 */
+	{XREF_CLK3, (M9 | PIN_OUTPUT_PULLDOWN)},	/* xref_clk3.clkout3 */
+	{MCASP1_ACLKX, (M11 | PIN_OUTPUT_PULLDOWN)},	/* mcasp1_aclkx.pr2_mdio_mdclk */
+	{MCASP1_FSX, (M11 | PIN_INPUT | SLEWCONTROL)},	/* mcasp1_fsx.pr2_mdio_data */
+	{MCASP1_ACLKR, (M14 | PIN_INPUT)},	/* mcasp1_aclkr.gpio5_0 */
+	{MCASP1_FSR, (M14 | PIN_INPUT)},	/* mcasp1_fsr.gpio5_1 */
+	{MCASP1_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr0.pr2_mii0_rxer */
+	{MCASP1_AXR1, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr1.pr2_mii_mt0_clk */
+	{MCASP1_AXR2, (M14 | PIN_INPUT)},	/* mcasp1_axr2.gpio5_4 */
+	{MCASP1_AXR3, (M14 | PIN_INPUT)},	/* mcasp1_axr3.gpio5_5 */
+	{MCASP1_AXR4, (M14 | PIN_OUTPUT)},	/* mcasp1_axr4.gpio5_6 */
+	{MCASP1_AXR5, (M14 | PIN_OUTPUT)},	/* mcasp1_axr5.gpio5_7 */
+	{MCASP1_AXR6, (M14 | PIN_OUTPUT)},	/* mcasp1_axr6.gpio5_8 */
+	{MCASP1_AXR7, (M14 | PIN_OUTPUT)},	/* mcasp1_axr7.gpio5_9 */
+	{MCASP1_AXR8, (M11 | PIN_OUTPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr8.pr2_mii0_txen */
+	{MCASP1_AXR9, (M11 | PIN_OUTPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr9.pr2_mii0_txd3 */
+	{MCASP1_AXR10, (M11 | PIN_OUTPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr10.pr2_mii0_txd2 */
+	{MCASP1_AXR11, (M11 | PIN_OUTPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr11.pr2_mii0_txd1 */
+	{MCASP1_AXR12, (M11 | PIN_OUTPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr12.pr2_mii0_txd0 */
+	{MCASP1_AXR13, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr13.pr2_mii_mr0_clk */
+	{MCASP1_AXR14, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr14.pr2_mii0_rxdv */
+	{MCASP1_AXR15, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr15.pr2_mii0_rxd3 */
+	{MCASP2_ACLKX, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp2_aclkx.pr2_mii0_rxd2 */
+	{MCASP2_FSX, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_fsx.pr2_mii0_rxd1 */
+	{MCASP2_AXR2, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_axr2.pr2_mii0_rxd0 */
+	{MCASP2_AXR3, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_axr3.pr2_mii0_rxlink */
+	{MCASP2_AXR4, (M14 | PIN_INPUT)},	/* mcasp2_axr4.gpio1_4 */
+	{MCASP2_AXR5, (M14 | PIN_OUTPUT)},	/* mcasp2_axr5.gpio6_7 */
+	{MCASP2_AXR6, (M14 | PIN_OUTPUT)},	/* mcasp2_axr6.gpio2_29 */
+	{MCASP2_AXR7, (M14 | PIN_INPUT)},	/* mcasp2_axr7.gpio1_5 */
+	{MCASP3_ACLKX, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp3_aclkx.pr2_mii0_crs */
+	{MCASP3_FSX, (M11 | PIN_INPUT_SLEW)},	/* mcasp3_fsx.pr2_mii0_col */
+	{MCASP3_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp3_axr0.pr2_mii1_rxer */
+	{MCASP3_AXR1, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp3_axr1.pr2_mii1_rxlink */
+	{MCASP4_ACLKX, (M2 | PIN_INPUT)},	/* mcasp4_aclkx.spi3_sclk */
+	{MCASP4_FSX, (M2 | PIN_INPUT)},	/* mcasp4_fsx.spi3_d1 */
+	{MCASP4_AXR1, (M2 | PIN_INPUT_PULLUP)},	/* mcasp4_axr1.spi3_cs0 */
+	{MCASP5_ACLKX, (M13 | PIN_OUTPUT | MANUAL_MODE)},	/* mcasp5_aclkx.pr2_pru1_gpo1 */
+	{MCASP5_FSX, (M12 | PIN_INPUT | MANUAL_MODE)},	/* mcasp5_fsx.pr2_pru1_gpi2 */
+	{MMC1_CLK, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_clk.mmc1_clk */
+	{MMC1_CMD, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_cmd.mmc1_cmd */
+	{MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat0.mmc1_dat0 */
+	{MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat1.mmc1_dat1 */
+	{MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat2.mmc1_dat2 */
+	{MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat3.mmc1_dat3 */
+	{MMC1_SDCD, (M14 | PIN_INPUT | SLEWCONTROL)},	/* mmc1_sdcd.gpio6_27 */
+	{MMC1_SDWP, (M14 | PIN_INPUT | SLEWCONTROL)},	/* mmc1_sdwp.gpio6_28 */
+	{GPIO6_10, (M11 | PIN_INPUT_PULLUP)},	/* gpio6_10.pr2_mii_mt1_clk */
+	{GPIO6_11, (M11 | PIN_OUTPUT_PULLUP)},	/* gpio6_11.pr2_mii1_txen */
+	{MMC3_CLK, (M11 | PIN_OUTPUT_PULLUP)},	/* mmc3_clk.pr2_mii1_txd3 */
+	{MMC3_CMD, (M11 | PIN_OUTPUT_PULLUP)},	/* mmc3_cmd.pr2_mii1_txd2 */
+	{MMC3_DAT0, (M11 | PIN_OUTPUT_PULLUP)},	/* mmc3_dat0.pr2_mii1_txd1 */
+	{MMC3_DAT1, (M11 | PIN_OUTPUT_PULLUP)},	/* mmc3_dat1.pr2_mii1_txd0 */
+	{MMC3_DAT2, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_dat2.pr2_mii_mr1_clk */
+	{MMC3_DAT3, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat3.pr2_mii1_rxdv */
+	{MMC3_DAT4, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat4.pr2_mii1_rxd3 */
+	{MMC3_DAT5, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat5.pr2_mii1_rxd2 */
+	{MMC3_DAT6, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat6.pr2_mii1_rxd1 */
+	{MMC3_DAT7, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat7.pr2_mii1_rxd0 */
+	{SPI1_SCLK, (M14 | PIN_OUTPUT)},	/* spi1_sclk.gpio7_7 */
+	{SPI1_D1, (M14 | PIN_OUTPUT)},	/* spi1_d1.gpio7_8 */
+	{SPI1_D0, (M14 | PIN_OUTPUT)},	/* spi1_d0.gpio7_9 */
+	{SPI1_CS0, (M14 | PIN_OUTPUT)},	/* spi1_cs0.gpio7_10 */
+	{SPI1_CS1, (M14 | PIN_OUTPUT)},	/* spi1_cs1.gpio7_11 */
+	{SPI1_CS2, (M14 | PIN_INPUT_SLEW)},	/* spi1_cs2.gpio7_12 */
+	{SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
+	{SPI2_SCLK, (M0 | PIN_INPUT)},	/* spi2_sclk.spi2_sclk */
+	{SPI2_D1, (M0 | PIN_INPUT | SLEWCONTROL)},	/* spi2_d1.spi2_d1 */
+	{SPI2_D0, (M0 | PIN_INPUT | SLEWCONTROL)},	/* spi2_d0.spi2_d0 */
+	{SPI2_CS0, (M0 | PIN_INPUT | SLEWCONTROL)},	/* spi2_cs0.spi2_cs0 */
+	{DCAN1_TX, (M15 | PULL_UP)},	/* dcan1_tx.safe for dcan1_tx */
+	{DCAN1_RX, (M15 | PULL_UP)},	/* dcan1_rx.safe for dcan1_rx */
+	{UART1_RXD, (M14 | PIN_OUTPUT | SLEWCONTROL)},	/* uart1_rxd.gpio7_22 */
+	{UART1_TXD, (M14 | PIN_OUTPUT | SLEWCONTROL)},	/* uart1_txd.gpio7_23 */
+	{UART2_RXD, (M4 | PIN_INPUT)},	/* uart2_rxd.uart2_rxd */
+	{UART2_TXD, (M0 | PIN_OUTPUT)},	/* uart2_txd.uart2_txd */
+	{UART2_CTSN, (M2 | PIN_INPUT)},	/* uart2_ctsn.uart3_rxd */
+	{UART2_RTSN, (M1 | PIN_OUTPUT)},	/* uart2_rtsn.uart3_txd */
+	{I2C1_SDA, (M0 | PIN_INPUT)},	/* i2c1_sda.i2c1_sda */
+	{I2C1_SCL, (M0 | PIN_INPUT)},	/* i2c1_scl.i2c1_scl */
+	{I2C2_SDA, (M1 | PIN_INPUT)},	/* i2c2_sda.hdmi1_ddc_scl */
+	{I2C2_SCL, (M1 | PIN_INPUT)},	/* i2c2_scl.hdmi1_ddc_sda */
+	{WAKEUP0, (M0 | PIN_INPUT)},	/* Wakeup0.Wakeup0 */
+	{WAKEUP1, (M0 | PIN_INPUT)},	/* Wakeup1.Wakeup1 */
+	{WAKEUP2, (M0 | PIN_INPUT)},	/* Wakeup2.Wakeup2 */
+	{WAKEUP3, (M0 | PIN_INPUT)},	/* Wakeup3.Wakeup3 */
+	{ON_OFF, (M0 | PIN_OUTPUT)},	/* on_off.on_off */
+	{RTC_PORZ, (M0 | PIN_INPUT)},	/* rtc_porz.rtc_porz */
+	{TMS, (M0 | PIN_INPUT_PULLUP)},	/* tms.tms */
+	{TDI, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* tdi.tdi */
+	{TDO, (M0 | PIN_OUTPUT_PULLUP)},	/* tdo.tdo */
+	{TCLK, (M0 | PIN_INPUT_PULLUP)},	/* tclk.tclk */
+	{TRSTN, (M0 | PIN_INPUT_PULLDOWN)},	/* trstn.trstn */
+	{RTCK, (M0 | PIN_OUTPUT_PULLUP)},	/* rtck.rtck */
+	{EMU0, (M0 | PIN_INPUT_PULLUP)},	/* emu0.emu0 */
+	{EMU1, (M0 | PIN_INPUT_PULLUP)},	/* emu1.emu1 */
+	{RESETN, (M0 | PIN_INPUT)},	/* resetn.resetn */
+	{NMIN_DSP, (M0 | PIN_INPUT)},	/* nmin_dsp.nmin_dsp */
+	{RSTOUTN, (M0 | PIN_OUTPUT)},	/* rstoutn.rstoutn */
+};
+
 const struct pad_conf_entry core_padconf_array_essential_am572x_idk[] = {
 	{GPMC_A0, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a0.vin4b_d0 */
 	{GPMC_A1, (M6 | PIN_INPUT | MANUAL_MODE)},	/* gpmc_a1.vin4b_d1 */
@@ -980,6 +1200,85 @@ const struct iodelay_cfg_entry iodelay_cfg_array_x15_sr2_0[] = {
 	{0x0CEC, 2739, 0},	/* CFG_VOUT1_VSYNC_OUT */
 };
 
+const struct iodelay_cfg_entry iodelay_cfg_array_am574x_idk[] = {
+	{0x0114, 2199, 621},	/* CFG_GPMC_A0_IN */
+	{0x0120, 0, 0},	/* CFG_GPMC_A10_IN */
+	{0x012C, 2133, 859},	/* CFG_GPMC_A11_IN */
+	{0x0138, 2258, 562},	/* CFG_GPMC_A12_IN */
+	{0x0144, 0, 0},	/* CFG_GPMC_A13_IN */
+	{0x0150, 2149, 1052},	/* CFG_GPMC_A14_IN */
+	{0x015C, 2121, 997},	/* CFG_GPMC_A15_IN */
+	{0x0168, 2159, 1134},	/* CFG_GPMC_A16_IN */
+	{0x0170, 0, 0},	/* CFG_GPMC_A16_OUT */
+	{0x0174, 2135, 1085},	/* CFG_GPMC_A17_IN */
+	{0x0188, 0, 0},	/* CFG_GPMC_A18_OUT */
+	{0x0198, 1989, 612},	/* CFG_GPMC_A1_IN */
+	{0x0204, 2218, 912},	/* CFG_GPMC_A2_IN */
+	{0x0210, 2168, 963},	/* CFG_GPMC_A3_IN */
+	{0x021C, 2196, 813},	/* CFG_GPMC_A4_IN */
+	{0x0228, 2082, 782},	/* CFG_GPMC_A5_IN */
+	{0x0234, 2098, 407},	/* CFG_GPMC_A6_IN */
+	{0x0240, 2343, 585},	/* CFG_GPMC_A7_IN */
+	{0x024C, 2030, 685},	/* CFG_GPMC_A8_IN */
+	{0x0258, 2116, 832},	/* CFG_GPMC_A9_IN */
+	{0x0374, 0, 0},	/* CFG_GPMC_CS2_OUT */
+	{0x0590, 1000, 3900},	/* CFG_MCASP5_ACLKX_OUT */
+	{0x05AC, 1000, 3800},	/* CFG_MCASP5_FSX_IN */
+	{0x06F0, 451, 0},	/* CFG_RGMII0_RXC_IN */
+	{0x06FC, 127, 1571},	/* CFG_RGMII0_RXCTL_IN */
+	{0x0708, 165, 1178},	/* CFG_RGMII0_RXD0_IN */
+	{0x0714, 136, 1302},	/* CFG_RGMII0_RXD1_IN */
+	{0x0720, 0, 1520},	/* CFG_RGMII0_RXD2_IN */
+	{0x072C, 28, 1690},	/* CFG_RGMII0_RXD3_IN */
+	{0x0740, 121, 0},	/* CFG_RGMII0_TXC_OUT */
+	{0x074C, 60, 0},	/* CFG_RGMII0_TXCTL_OUT */
+	{0x0758, 153, 0},	/* CFG_RGMII0_TXD0_OUT */
+	{0x0764, 35, 0},	/* CFG_RGMII0_TXD1_OUT */
+	{0x0770, 0, 0},	/* CFG_RGMII0_TXD2_OUT */
+	{0x077C, 172, 0},	/* CFG_RGMII0_TXD3_OUT */
+	{0x0A70, 147, 0},	/* CFG_VIN2A_D12_OUT */
+	{0x0A7C, 110, 0},	/* CFG_VIN2A_D13_OUT */
+	{0x0A88, 18, 0},	/* CFG_VIN2A_D14_OUT */
+	{0x0A94, 82, 0},	/* CFG_VIN2A_D15_OUT */
+	{0x0AA0, 33, 0},	/* CFG_VIN2A_D16_OUT */
+	{0x0AAC, 0, 0},	/* CFG_VIN2A_D17_OUT */
+	{0x0AB0, 417, 0},	/* CFG_VIN2A_D18_IN */
+	{0x0ABC, 156, 843},	/* CFG_VIN2A_D19_IN */
+	{0x0AD4, 223, 1413},	/* CFG_VIN2A_D20_IN */
+	{0x0AE0, 169, 1415},	/* CFG_VIN2A_D21_IN */
+	{0x0AEC, 43, 1150},	/* CFG_VIN2A_D22_IN */
+	{0x0AF8, 0, 1210},	/* CFG_VIN2A_D23_IN */
+	{0x0B30, 0, 200},	/* CFG_VIN2A_D5_OUT */
+	{0x0B9C, 1281, 497},	/* CFG_VOUT1_CLK_OUT */
+	{0x0BA8, 379, 0},	/* CFG_VOUT1_D0_OUT */
+	{0x0BB4, 441, 0},	/* CFG_VOUT1_D10_OUT */
+	{0x0BC0, 461, 0},	/* CFG_VOUT1_D11_OUT */
+	{0x0BCC, 1189, 0},	/* CFG_VOUT1_D12_OUT */
+	{0x0BD8, 312, 0},	/* CFG_VOUT1_D13_OUT */
+	{0x0BE4, 298, 0},	/* CFG_VOUT1_D14_OUT */
+	{0x0BF0, 284, 0},	/* CFG_VOUT1_D15_OUT */
+	{0x0BFC, 152, 0},	/* CFG_VOUT1_D16_OUT */
+	{0x0C08, 216, 0},	/* CFG_VOUT1_D17_OUT */
+	{0x0C14, 408, 0},	/* CFG_VOUT1_D18_OUT */
+	{0x0C20, 519, 0},	/* CFG_VOUT1_D19_OUT */
+	{0x0C2C, 475, 0},	/* CFG_VOUT1_D1_OUT */
+	{0x0C38, 316, 0},	/* CFG_VOUT1_D20_OUT */
+	{0x0C44, 59, 0},	/* CFG_VOUT1_D21_OUT */
+	{0x0C50, 221, 0},	/* CFG_VOUT1_D22_OUT */
+	{0x0C5C, 96, 0},	/* CFG_VOUT1_D23_OUT */
+	{0x0C68, 264, 0},	/* CFG_VOUT1_D2_OUT */
+	{0x0C74, 421, 0},	/* CFG_VOUT1_D3_OUT */
+	{0x0C80, 1257, 0},	/* CFG_VOUT1_D4_OUT */
+	{0x0C8C, 432, 0},	/* CFG_VOUT1_D5_OUT */
+	{0x0C98, 436, 0},	/* CFG_VOUT1_D6_OUT */
+	{0x0CA4, 440, 0},	/* CFG_VOUT1_D7_OUT */
+	{0x0CB0, 81, 100},	/* CFG_VOUT1_D8_OUT */
+	{0x0CBC, 471, 0},	/* CFG_VOUT1_D9_OUT */
+	{0x0CC8, 0, 0},	/* CFG_VOUT1_DE_OUT */
+	{0x0CE0, 0, 0},	/* CFG_VOUT1_HSYNC_OUT */
+	{0x0CEC, 815, 0},	/* CFG_VOUT1_VSYNC_OUT */
+};
+
 const struct iodelay_cfg_entry iodelay_cfg_array_am572x_idk[] = {
 	{0x0114, 1861, 901},	/* CFG_GPMC_A0_IN */
 	{0x0120, 0, 0},	/* CFG_GPMC_A10_IN */
-- 
2.15.1

[U-Boot] [PATCH 11/13] board: ti: am57xx: Enable CMD_DDR3

[Lokesh Vutla]

Enable CMD_DDR3 on all am57xx based platforms.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-omap2/omap5/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig
index 8c1730a6be..deb9873cc5 100644
--- a/arch/arm/mach-omap2/omap5/Kconfig
+++ b/arch/arm/mach-omap2/omap5/Kconfig
@@ -39,6 +39,7 @@ config TARGET_AM57XX_EVM
 	select BOARD_LATE_INIT
 	select DRA7XX
 	select TI_I2C_BOARD_DETECT
+	select CMD_DDR3
 	imply SCSI
 	imply SPL_THERMAL
 	imply DM_THERMAL
-- 
2.15.1

[U-Boot] [PATCH 11/13] board: ti: am57xx: Enable CMD_DDR3

[Lukasz Majewski]

Hi Lokesh,

> Enable CMD_DDR3 on all am57xx based platforms.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>  arch/arm/mach-omap2/omap5/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/mach-omap2/omap5/Kconfig
> b/arch/arm/mach-omap2/omap5/Kconfig index 8c1730a6be..deb9873cc5
> 100644 --- a/arch/arm/mach-omap2/omap5/Kconfig
> +++ b/arch/arm/mach-omap2/omap5/Kconfig
> @@ -39,6 +39,7 @@ config TARGET_AM57XX_EVM
>  	select BOARD_LATE_INIT
>  	select DRA7XX
>  	select TI_I2C_BOARD_DETECT
> +	select CMD_DDR3

I'm just curious - what is the purpose of this command?

>  	imply SCSI
>  	imply SPL_THERMAL
>  	imply DM_THERMAL



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171218/52beadfe/attachment.sig>

[U-Boot] [PATCH 11/13] board: ti: am57xx: Enable CMD_DDR3

[Lokesh Vutla]

Hi Lukas,

On Monday 18 December 2017 04:48 PM, Lukasz Majewski wrote:
> Hi Lokesh,
> 
>> Enable CMD_DDR3 on all am57xx based platforms.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>>  arch/arm/mach-omap2/omap5/Kconfig | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/mach-omap2/omap5/Kconfig
>> b/arch/arm/mach-omap2/omap5/Kconfig index 8c1730a6be..deb9873cc5
>> 100644 --- a/arch/arm/mach-omap2/omap5/Kconfig
>> +++ b/arch/arm/mach-omap2/omap5/Kconfig
>> @@ -39,6 +39,7 @@ config TARGET_AM57XX_EVM
>>  	select BOARD_LATE_INIT
>>  	select DRA7XX
>>  	select TI_I2C_BOARD_DETECT
>> +	select CMD_DDR3
> 
> I'm just curious - what is the purpose of this command?

This command supports memory testing and ecc testing.

Thanks and regards,
Lokesh

[U-Boot] [PATCH 12/13] ARM: dts: am574x-idk: Add initial support

[Lokesh Vutla]

Add initial dts support for am574x-idk

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
- DTS patch posted to kernel: https://patchwork.kernel.org/patch/10118295/
 arch/arm/dts/Makefile                     |   1 +
 arch/arm/dts/am572x-idk-common.dtsi       | 100 ++++++++++++++++++++++++++++++
 arch/arm/dts/am572x-idk.dts               |  93 +--------------------------
 arch/arm/dts/am574x-idk.dts               |  22 +++++++
 arch/arm/dts/am57xx-commercial-grade.dtsi |   1 +
 arch/arm/dts/am57xx-industrial-grade.dtsi |   1 +
 configs/am57xx_evm_defconfig              |   2 +-
 configs/am57xx_hs_evm_defconfig           |   2 +-
 8 files changed, 128 insertions(+), 94 deletions(-)
 create mode 100644 arch/arm/dts/am572x-idk-common.dtsi
 create mode 100644 arch/arm/dts/am574x-idk.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1c9ac1468b..c0fc414292 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -187,6 +187,7 @@ dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb	\
 dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
 	am57xx-beagle-x15-revc.dtb \
+	am574x-idk.dtb \
 	am572x-idk.dtb	\
 	am571x-idk.dtb
 dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
diff --git a/arch/arm/dts/am572x-idk-common.dtsi b/arch/arm/dts/am572x-idk-common.dtsi
new file mode 100644
index 0000000000..c6d858b310
--- /dev/null
+++ b/arch/arm/dts/am572x-idk-common.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+
+/ {
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	status-leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		cpu1-led {
+			label = "status1:red:cpu1";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu1";
+		};
+
+		usr1-led {
+			label = "status1:green:usr";
+			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/am572x-idk.dts b/arch/arm/dts/am572x-idk.dts
index a578fe97ba..9212931f25 100644
--- a/arch/arm/dts/am572x-idk.dts
+++ b/arch/arm/dts/am572x-idk.dts
@@ -9,8 +9,7 @@
 /dts-v1/;
 
 #include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am572x-idk-common.dtsi"
 #include "am57xx-idk-common.dtsi"
 #include "dra74x-mmc-iodelay.dtsi"
 
@@ -18,54 +17,6 @@
 	model = "TI AM5728 IDK";
 	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
 		     "ti,dra7";
-
-	memory at 0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	status-leds {
-		compatible = "gpio-leds";
-		cpu0-led {
-			label = "status0:red:cpu0";
-			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		usr0-led {
-			label = "status0:green:usr";
-			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		heartbeat-led {
-			label = "status0:blue:heartbeat";
-			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		cpu1-led {
-			label = "status1:red:cpu1";
-			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu1";
-		};
-
-		usr1-led {
-			label = "status1:green:usr";
-			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		mmc0-led {
-			label = "status1:blue:mmc0";
-			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
 };
 
 &mmc1 {
@@ -85,45 +36,3 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
-};
-
-&sn65hvs882 {
-	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-};
-
-&pcie1_rc {
-	status = "okay";
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/dts/am574x-idk.dts b/arch/arm/dts/am574x-idk.dts
new file mode 100644
index 0000000000..41e12a382d
--- /dev/null
+++ b/arch/arm/dts/am574x-idk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+	model = "TI AM5748 IDK";
+	compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7";
+};
+
+&qspi {
+	spi-max-frequency = <96000000>;
+	m25p80 at 0 {
+		spi-max-frequency = <96000000>;
+	};
+};
diff --git a/arch/arm/dts/am57xx-commercial-grade.dtsi b/arch/arm/dts/am57xx-commercial-grade.dtsi
index c183654464..3eed6e09c8 100644
--- a/arch/arm/dts/am57xx-commercial-grade.dtsi
+++ b/arch/arm/dts/am57xx-commercial-grade.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 &cpu_alert0 {
 	temperature = <80000>; /* milliCelsius */
 };
diff --git a/arch/arm/dts/am57xx-industrial-grade.dtsi b/arch/arm/dts/am57xx-industrial-grade.dtsi
index 70c8c4ba19..422f953fc8 100644
--- a/arch/arm/dts/am57xx-industrial-grade.dtsi
+++ b/arch/arm/dts/am57xx-industrial-grade.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 &cpu_alert0 {
 	temperature = <90000>; /* milliCelsius */
 };
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index fc96401d3e..e1738e00d0 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -35,7 +35,7 @@ CONFIG_CMD_SPL=y
 CONFIG_ISO_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk"
+CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index 681e2a54c8..25e620c6dc 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -38,7 +38,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=1
 CONFIG_ISO_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk"
+CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
-- 
2.15.1

[U-Boot] [PATCH 12/13] ARM: dts: am574x-idk: Add initial support

[Tom Rini]

On Mon, Dec 18, 2017 at 03:04:24PM +0530, Lokesh Vutla wrote:

> Add initial dts support for am574x-idk
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
> - DTS patch posted to kernel: https://patchwork.kernel.org/patch/10118295/
>  arch/arm/dts/Makefile                     |   1 +
>  arch/arm/dts/am572x-idk-common.dtsi       | 100 ++++++++++++++++++++++++++++++
>  arch/arm/dts/am572x-idk.dts               |  93 +--------------------------
>  arch/arm/dts/am574x-idk.dts               |  22 +++++++
>  arch/arm/dts/am57xx-commercial-grade.dtsi |   1 +
>  arch/arm/dts/am57xx-industrial-grade.dtsi |   1 +
>  configs/am57xx_evm_defconfig              |   2 +-
>  configs/am57xx_hs_evm_defconfig           |   2 +-
>  8 files changed, 128 insertions(+), 94 deletions(-)
>  create mode 100644 arch/arm/dts/am572x-idk-common.dtsi
>  create mode 100644 arch/arm/dts/am574x-idk.dts

What's the status of these DTS/DTSI files wrt the kernel?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171218/3bc2130a/attachment.sig>

[U-Boot] [PATCH 12/13] ARM: dts: am574x-idk: Add initial support

[Lokesh Vutla]

On Tuesday 19 December 2017 01:34 AM, Tom Rini wrote:
> On Mon, Dec 18, 2017 at 03:04:24PM +0530, Lokesh Vutla wrote:
> 
>> Add initial dts support for am574x-idk
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>> - DTS patch posted to kernel: https://patchwork.kernel.org/patch/10118295/
>>  arch/arm/dts/Makefile                     |   1 +
>>  arch/arm/dts/am572x-idk-common.dtsi       | 100 ++++++++++++++++++++++++++++++
>>  arch/arm/dts/am572x-idk.dts               |  93 +--------------------------
>>  arch/arm/dts/am574x-idk.dts               |  22 +++++++
>>  arch/arm/dts/am57xx-commercial-grade.dtsi |   1 +
>>  arch/arm/dts/am57xx-industrial-grade.dtsi |   1 +
>>  configs/am57xx_evm_defconfig              |   2 +-
>>  configs/am57xx_hs_evm_defconfig           |   2 +-
>>  8 files changed, 128 insertions(+), 94 deletions(-)
>>  create mode 100644 arch/arm/dts/am572x-idk-common.dtsi
>>  create mode 100644 arch/arm/dts/am574x-idk.dts
> 
> What's the status of these DTS/DTSI files wrt the kernel?  Thanks!
> 

DTS patches merged today. Will post a v2 of this series soon.

Thanks and regards,
Lokesh

[U-Boot] [PATCH 13/13] env: ti: Select dtb name for dra76x and am574

[Lokesh Vutla]

Select dtb name for am574x-idk and dra76x evm with acd package.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 include/environment/ti/boot.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h
index 799d9840aa..0a2342061c 100644
--- a/include/environment/ti/boot.h
+++ b/include/environment/ti/boot.h
@@ -67,7 +67,7 @@
 			"setenv fdtfile dra72-evm.dtb; fi;" \
 		"if test $board_name = dra71x; then " \
 			"setenv fdtfile dra71-evm.dtb; fi;" \
-		"if test $board_name = dra76x; then " \
+		"if test $board_name = dra76x_acd; then " \
 			"setenv fdtfile dra76-evm.dtb; fi;" \
 		"if test $board_name = beagle_x15; then " \
 			"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
@@ -77,6 +77,8 @@
 			"setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \
 		"if test $board_name = am572x_idk; then " \
 			"setenv fdtfile am572x-idk.dtb; fi;" \
+		"if test $board_name = am574x_idk; then " \
+			"setenv fdtfile am574x-idk.dtb; fi;" \
 		"if test $board_name = am57xx_evm; then " \
 			"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
 		"if test $board_name = am57xx_evm_reva3; then " \
-- 
2.15.1