public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Vignesh R <vigneshr@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible"
Date: Tue, 9 Jan 2018 18:49:19 +0530	[thread overview]
Message-ID: <20180109131920.23057-3-vigneshr@ti.com> (raw)
In-Reply-To: <20180109131920.23057-1-vigneshr@ti.com>

This reverts commit 57897c13de03ac0136d64641a3eab526c6810387.

Using bounce_buf.c to handle non-DMA alignment problems is bad as
bounce_buf.c does cache manipulations which is not required. Therefore
revert this patch in favour of local bounce buffer solution in the next
patch.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
 drivers/spi/cadence_qspi_apb.c   | 26 ++++++--------------------
 include/configs/k2g_evm.h        |  1 -
 include/configs/socfpga_common.h |  1 -
 include/configs/stv0991.h        |  1 -
 4 files changed, 6 insertions(+), 23 deletions(-)

diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index c7cb33aa8fc3..fa8af33ae19b 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -30,7 +30,6 @@
 #include <linux/errno.h>
 #include <wait_bit.h>
 #include <spi.h>
-#include <bouncebuf.h>
 #include "cadence_qspi.h"
 
 #define CQSPI_REG_POLL_US			1 /* 1us */
@@ -718,17 +717,6 @@ int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
 	unsigned int remaining = n_tx;
 	unsigned int write_bytes;
 	int ret;
-	struct bounce_buffer bb;
-	u8 *bb_txbuf;
-
-	/*
-	 * Handle non-4-byte aligned accesses via bounce buffer to
-	 * avoid data abort.
-	 */
-	ret = bounce_buffer_start(&bb, (void *)txbuf, n_tx, GEN_BB_READ);
-	if (ret)
-		return ret;
-	bb_txbuf = bb.bounce_buffer;
 
 	/* Configure the indirect read transfer bytes */
 	writel(n_tx, plat->regbase + CQSPI_REG_INDIRECTWRBYTES);
@@ -739,11 +727,11 @@ int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
 
 	while (remaining > 0) {
 		write_bytes = remaining > page_size ? page_size : remaining;
-		writesl(plat->ahbbase, bb_txbuf, write_bytes >> 2);
-		if (write_bytes % 4)
-			writesb(plat->ahbbase,
-				bb_txbuf + rounddown(write_bytes, 4),
-				write_bytes % 4);
+		/* Handle non-4-byte aligned access to avoid data abort. */
+		if (((uintptr_t)txbuf % 4) || (write_bytes % 4))
+			writesb(plat->ahbbase, txbuf, write_bytes);
+		else
+			writesl(plat->ahbbase, txbuf, write_bytes >> 2);
 
 		ret = wait_for_bit("QSPI", plat->regbase + CQSPI_REG_SDRAMLEVEL,
 				   CQSPI_REG_SDRAMLEVEL_WR_MASK <<
@@ -753,7 +741,7 @@ int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
 			goto failwr;
 		}
 
-		bb_txbuf += write_bytes;
+		txbuf += write_bytes;
 		remaining -= write_bytes;
 	}
 
@@ -764,7 +752,6 @@ int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
 		printf("Indirect write completion error (%i)\n", ret);
 		goto failwr;
 	}
-	bounce_buffer_stop(&bb);
 
 	/* Clear indirect completion status */
 	writel(CQSPI_REG_INDIRECTWR_DONE,
@@ -775,7 +762,6 @@ failwr:
 	/* Cancel the indirect write */
 	writel(CQSPI_REG_INDIRECTWR_CANCEL,
 	       plat->regbase + CQSPI_REG_INDIRECTWR);
-	bounce_buffer_stop(&bb);
 	return ret;
 }
 
diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
index 535e7124fc80..0a38922a519e 100644
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@@ -93,7 +93,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_CADENCE_QSPI
 #define CONFIG_CQSPI_REF_CLK 384000000
-#define CONFIG_BOUNCE_BUFFER
 #endif
 
 #define SPI_MTD_PARTS	KEYSTONE_SPI1_MTD_PARTS
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index ec8bb500504a..f6607b101ec5 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -184,7 +184,6 @@ unsigned int cm_get_l4_sp_clk_hz(void);
 unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_CQSPI_REF_CLK		cm_get_qspi_controller_clk_hz()
 #endif
-#define CONFIG_BOUNCE_BUFFER
 
 /*
  * Designware SPI support
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index fd96979bf897..beb8f1ae9a92 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -64,7 +64,6 @@
 + */
 #ifdef CONFIG_OF_CONTROL		/* QSPI is controlled via DT */
 #define CONFIG_CQSPI_REF_CLK		((30/4)/2)*1000*1000
-#define CONFIG_BOUNCE_BUFFER
 
 #endif
 
-- 
2.15.1

  parent reply	other threads:[~2018-01-09 13:19 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-09 13:19 [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses Vignesh R
2018-01-09 13:19 ` [U-Boot] [PATCH v2 1/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible" Vignesh R
2018-01-09 13:19 ` Vignesh R [this message]
2018-01-09 13:19 ` [U-Boot] [PATCH v2 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned Vignesh R
2018-01-15 11:36 ` [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses Vignesh R
2018-01-15 11:45   ` Marek Vasut
2018-01-15 12:01     ` Simon Goldschmidt
2018-01-15 13:47       ` Jason Rush
2018-01-23  8:12         ` Simon Goldschmidt
2018-01-23  8:45           ` Jagan Teki
2018-01-23  9:02             ` Vignesh R
2018-01-23  9:07               ` Jagan Teki
2018-01-23  9:16                 ` Vignesh R
2018-01-23  9:24                   ` Jagan Teki
2018-01-23  9:26                   ` Simon Goldschmidt
2018-01-23  9:31                     ` Jagan Teki
2018-01-23 10:05                       ` Vignesh R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180109131920.23057-3-vigneshr@ti.com \
    --to=vigneshr@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox