[U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK

[Peng Fan <van.freenix@gmail.com>]

Hi Diego,
On Thu, Jan 11, 2018 at 10:36:02AM -0200, Diego Dorta wrote:
>Hi Peng,
>
>2018-01-10 23:16 GMT-02:00 Peng Fan <van.freenix@gmail.com>:
>> Hi Diego,
>>
>> On Wed, Jan 10, 2018 at 11:08:54AM -0200, Diego Dorta wrote:
>>>Hi Peng,
>>>
>>>2018-01-10 3:20 GMT-02:00 Peng Fan <peng.fan@nxp.com>:
>>>> This patchset is to add i.MX8M and i.MX8MQ-EVK support
>>>>
>>>> V5:
>>>>  Drop wait_mask_set/clr_timeout and switch to use readl_poll_timeout in
>>>>  the patchset.
>>>>
>>>> V4:
>>>>  Regenerate patchset based on Tom's master tree.
>>>>  In this patchset, https://patchwork.ozlabs.org/patch/855027/
>>>>  "arm: imx: Rework i.MX specific commands to be excluded from SPL" from
>>>>  Tom is included to avoid merge conflicts because the i.mx8m change
>>>>  also has some modification to bootaux and arch/arm/mach-imx/Makefile.
>>>>  Because CONFIG_GPT_TIMER change, I did a small modification to apply
>>>>  Tom's patch, no function change.
>>>>
>>>>  Include ATF link in README.
>>>>
>>>> V3:
>>>>  This patchset based on https://patchwork.ozlabs.org/patch/855027/
>>>>  "arm: imx: Rework i.MX specific commands to be excluded from SPL" from
>>>>  Tom to avoid this patchset fail apply after Tom's patch merged.
>>>>
>>>>  Previously "power: pmic/regulator allow dm be omited by SPL" broke other
>>>>  boards, in V3 patchset, only touch pfuze100 related options.
>>>>
>>>>  Sharing code about get mac from fuse between mx7/mx8m
>>>>  Sharing code about bootaux between mx6/7/mx8m
>>>>  Sharing code about cpu speed grade between mx7/mx8m
>>>>  Sharing code about get boot device between mx7/mx8m
>>>>  Sharding code about mmc env between mx7/mx8m
>>>>
>>>>  Introduce wait_mask_set/clr_timeout to avoid deadloop in clock pll configuration
>>>>
>>>>  Correct authorship of fix building warning on fec arm64, patch 27/31.
>>>>
>>>>  Switch to use structure for DDR Controller. For DDR PHY registers,
>>>>  there are about more than 10 thousands registers, I could not convert
>>>>  them with detailed register name, and the script is generated from IC team,
>>>>  So I use regs[0xxxxx] arrays here fo easily converting between IC team
>>>>  released script and uboot ddr phy cod.
>>>>
>>>>  Improve REAMME file to include where to download firmware and imx-mkimage
>>>>  and how to build
>>>>
>>>>  Add review tags on the V2 patchset.
>>>>
>>>>  Hope this patchset could catch up next release :)
>>>>
>>>> V2:
>>>>
>>>>  patch 02/23: convert to structure, drop is_boot_from_usb and
>>>>               disconnect_from_usb
>>>>  patch 04/23: conver to use structure for the clock driver, removed the
>>>>               CCM_xxx macros. Add static for local functons.
>>>>               Add init_usdhc_clk, init_uart_clk and etc to not enable
>>>>               them all at default.
>>>>  patch 05/23: Add more commit msg for the sip part.
>>>>  patch 08/23: Merge the spl boot device with i.MX7
>>>>  patch 12/23: Typo fix and return error fix from Heiko for the SoC related part
>>>>  patch 22/23: Use a weak function ddr_init. If patch 23/23 could not be
>>>>               accepted at current stage, to make others still be could be
>>>>               compiled.
>>>>
>>>> The patchset depends on
>>>> https://patchwork.ozlabs.org/patch/841934/
>>>> https://patchwork.ozlabs.org/patch/841958/
>>>> to be tested on real hardware.
>>>>
>>>> V1:
>>>>
>>>> patch: "power: pmic.h: include dm/ofnode.h" and
>>>> "power: pmic/regulator allow dm be omited by SPL" is previously reviewed
>>>> in mailist to not merged. If no issue, you may pick it up.
>>>>
>>>> The board support is a large patch because of the ddr related code.
>>>> If it is not good, please first review/pick-up other patches if they
>>>> are ok.
>>>>
>>>>
>>>>
>>>> Peng Fan (29):
>>>>   imx: add i.MX8M into Kconfig
>>>>   imx: mx8m: add register definition header file
>>>>   imx: mx8m: add pin header file
>>>>   imx: mx8m: add clock driver
>>>>   imx: add sip function
>>>>   imx: boot_mode: add USB_BOOT entry
>>>>   imx: cpu: update cpu file to support i.MX8M
>>>>   imx: spl: implement spl_boot_device for i.MX8M
>>>>   imx: add i.MX8MQ SoC Revision and is_mx8m helper
>>>>   imx: add pad settings bit definition for i.MX8M
>>>>   imx: cpu: move speed/temp to common cpu
>>>>   imx: cpu: add cpu speed/grade for i.MX8M
>>>>   imx: refactor imx_get_mac_from_fuse
>>>>   imx: cleanup bootaux
>>>>   imx: bootaux: support i.MX8M
>>>>   imx: mx7: move get_boot_device to cpu.c
>>>>   imx: cpu: support get_boot_device for i.MX8M
>>>>   imx: mx7: move mmc env code to mmc_env.c
>>>>   imx: mx8m: add soc related settings and files
>>>>   imx: makefile: compile files for i.MX8M
>>>>   misc: ocotp: add i.MX8M support
>>>>   mmc: fsl_esdhc: support i.MX8M
>>>>   imx: lcdif: include i.MX8M
>>>>   gpio: mxc: add i.MX8M support
>>>>   net: fec: do not access reserved register for i.MX8M
>>>>   imx: imx8mq: add dtsi file
>>>>   power: pmic/regulator allow dm be omitted by SPL
>>>>   imx: mx8m: add ddr controller memory map
>>>>   imx: add i.MX8MQ EVK support
>>>>
>>>> Tom Rini (1):
>>>>   arm: imx: Rework i.MX specific commands to be excluded from SPL
>>>
>>>Thanks for your V5 patches, this time I had no problem on compiling it.
>>>
>>>But, even following your README step by step, the U-Boot hangs
>>>completely on this point:
>>>
>>>U-Boot SPL 2018.01-00038-gb464677cc7 (Jan 10 2018 - 09:50:45)
>>>PMIC:  PFUZE100 ID=0x10
>>>PMU message timeout
>>
>> Seems needs larger time wait.
>> Could you try
>> static inline void poll_pmu_message_ready(void)
>> {
>>         int ret;
>>         u32 val;
>>
>>         /*
>>          * When BIT0 set to 0, the PMU has a message for the user
>>          * 10ms seems not enough for poll message, so use 1s here.
>>          */
>>           ret = readl_poll_timeout(&regs->reg[0xd0004], val,
>>                             !(val & BIT(0)), 1000000);  --> Change 1000000 to 0?
>>            if (ret)
>>               puts("PMU message timeout\n");
>> }
>>
>
>I've just tested your suggestion and this time the U-Boot hangs it before:
>
>U-Boot SPL 2018.01-00038-gb464677cc7-dirty (Jan 11 2018 - 10:20:13)
>PMIC:  PFUZE100 ID=0x10
>
>
>> in board/freescale/mx8mq_evk/ddr/ddrphy_train.c
>> Not sure you are using latest B0 chip or not.
>>
>
>I only have the A0 chip, can you test on this one?

I test the patchset on my A0 board, it works. But I still
suggest using board with B0 chip. 

Thanks,
Peng

>
>> I'll wait for comments before sending new version patchset.
>>
>> Thanks,
>> Peng.
>>
>>>Normal Boot
>>>Trying to boot from MMC2
>>>
>>>Do you know how to solve it? If so, please add this information on the
>>>README file.
>>>
>>>Thanks,
>>>Diego
>
>Thanks,
>Diego

--