From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Mon, 22 Jan 2018 11:38:53 -0500 Subject: [U-Boot] [PATCH v2] arm: add support for PDU001 In-Reply-To: <84ce0f72-225a-55f8-1955-65c63b54710b@ltec.ch> References: <1516619269-27243-1-git-send-email-fb@ltec.ch> <20180122151543.GG32220@bill-the-cat> <84ce0f72-225a-55f8-1955-65c63b54710b@ltec.ch> Message-ID: <20180122163853.GK32220@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Jan 22, 2018 at 05:33:59PM +0100, Felix Brack wrote: > Hi Tom, > > On 22.01.2018 16:15, Tom Rini wrote: > > On Mon, Jan 22, 2018 at 12:07:49PM +0100, Felix Brack wrote: > > > >> This patch adds support for the PDU001 board. > >> > >> Signed-off-by: Felix Brack > > [snip] > >> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > >> index f6d57f5..15349b3 100644 > >> --- a/arch/arm/Kconfig > >> +++ b/arch/arm/Kconfig > >> @@ -1339,6 +1339,7 @@ source "board/vscom/baltos/Kconfig" > >> source "board/woodburn/Kconfig" > >> source "board/work-microwave/work_92105/Kconfig" > >> source "board/zipitz2/Kconfig" > >> +source "board/eets/pdu001/Kconfig" > > > Sorry, missed that one. > > > This should stay alphabetized. > > > > [snip] > >> new file mode 100644 > >> index 0000000..0967e82 > >> --- /dev/null > >> +++ b/arch/arm/dts/am335x-pdu001.dts > > > > So, have you pushed this platform upstream to Linux? > > > Not yet. I would like to follow the same procedure for Linux as I did > for U-Boot, i.e. first finish the work on all drivers required by the board. OK. Please just make sure to keep it in sync with feedback you get from upstream there, thanks! > >> @@ -0,0 +1,612 @@ > >> +/* > >> + * pdu001.dts > >> + * > >> + * EETS GmbH PDU001 board device tree file > >> + * > >> + * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/ > >> + * > >> + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ > >> + * > >> + * SPDX-License-Identifier: GPL-2.0-or-later > > > > This is not a free-form tag. Here and elsewhere you want "GPL-2.0+". > > > Well, I followed the advice on https://spdx.org/licenses/ when using > this tag. According to SPDX "GPL-2.0+" is deprecated as of V2.0rc2 and > the use of "GPL-2.0-or-later" is suggested instead. However I'm fine > using "GPL-2.0+", just let me know. Ugh. For now, please do GPL-2.0+ and I'll take an action to do a treewide update to match what's preferred as of 3.0. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: