From: Alexander Graf <agraf@suse.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 10/15] pl011: Convert CONFIG_PL011_SERIAL to Kconfig
Date: Thu, 25 Jan 2018 12:05:51 +0100 [thread overview]
Message-ID: <20180125110556.76352-11-agraf@suse.de> (raw)
In-Reply-To: <20180125110556.76352-1-agraf@suse.de>
We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.
This round goes to pl011.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/arm/Kconfig | 19 +++++++++++++++++++
drivers/serial/Kconfig | 6 ++++++
include/configs/highbank.h | 1 -
include/configs/mxs.h | 1 -
include/configs/spear-common.h | 1 -
include/configs/vexpress_aemv8a.h | 1 -
include/configs/vexpress_common.h | 1 -
include/configs/x600.h | 1 -
scripts/config_whitelist.txt | 1 -
9 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 97b8249432..1557e7cfdf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -400,49 +400,58 @@ config TARGET_APX4DEVKIT
bool "Support apx4devkit"
select CPU_ARM926EJS
select SUPPORT_SPL
+ select PL011_SERIAL
config TARGET_XFI3
bool "Support xfi3"
select CPU_ARM926EJS
select SUPPORT_SPL
+ select PL011_SERIAL
config TARGET_M28EVK
bool "Support m28evk"
select CPU_ARM926EJS
select SUPPORT_SPL
+ select PL011_SERIAL
config TARGET_MX23EVK
bool "Support mx23evk"
select CPU_ARM926EJS
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select PL011_SERIAL
config TARGET_MX28EVK
bool "Support mx28evk"
select CPU_ARM926EJS
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select PL011_SERIAL
config TARGET_MX23_OLINUXINO
bool "Support mx23_olinuxino"
select CPU_ARM926EJS
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select PL011_SERIAL
config TARGET_BG0900
bool "Support bg0900"
select CPU_ARM926EJS
select SUPPORT_SPL
+ select PL011_SERIAL
config TARGET_SANSA_FUZE_PLUS
bool "Support sansa_fuze_plus"
select CPU_ARM926EJS
select SUPPORT_SPL
+ select PL011_SERIAL
config TARGET_SC_SPS_1
bool "Support sc_sps_1"
select CPU_ARM926EJS
select SUPPORT_SPL
+ select PL011_SERIAL
config ORION5X
bool "Marvell Orion"
@@ -453,24 +462,28 @@ config TARGET_SPEAR300
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
imply CMD_SAVES
+ select PL011_SERIAL
config TARGET_SPEAR310
bool "Support spear310"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
imply CMD_SAVES
+ select PL011_SERIAL
config TARGET_SPEAR320
bool "Support spear320"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
imply CMD_SAVES
+ select PL011_SERIAL
config TARGET_SPEAR600
bool "Support spear600"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
imply CMD_SAVES
+ select PL011_SERIAL
config TARGET_STV0991
bool "Support stv0991"
@@ -486,6 +499,7 @@ config TARGET_X600
select BOARD_LATE_INIT
select CPU_ARM926EJS
select SUPPORT_SPL
+ select PL011_SERIAL
config TARGET_IMX31_PHYCORE
bool "Support imx31_phycore_eet"
@@ -541,14 +555,17 @@ config TARGET_VEXPRESS_CA15_TC2
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select PL011_SERIAL
config TARGET_VEXPRESS_CA5X2
bool "Support vexpress_ca5x2"
select CPU_V7
+ select PL011_SERIAL
config TARGET_VEXPRESS_CA9X4
bool "Support vexpress_ca9x4"
select CPU_V7
+ select PL011_SERIAL
config TARGET_BCM23550_W1D
bool "Support bcm23550_w1d"
@@ -607,6 +624,7 @@ config ARCH_S5PC1XX
config ARCH_HIGHBANK
bool "Calxeda Highbank"
select CPU_V7
+ select PL011_SERIAL
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
@@ -761,6 +779,7 @@ config TARGET_TS4600
bool "Support TS4600"
select CPU_ARM926EJS
select SUPPORT_SPL
+ select PL011_SERIAL
config ARCH_VF610
bool "Freescale Vybrid"
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 2816121dec..99aa817e63 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -453,6 +453,12 @@ config PL010_SERIAL
help
Select this to enable a UART for platforms using PL010.
+config PL011_SERIAL
+ bool "ARM PL011 driver"
+ depends on !DM_SERIAL
+ help
+ Select this to enable a UART for platforms using PL011.
+
config ROCKCHIP_SERIAL
bool "Rockchip on-chip UART support"
depends on DM_SERIAL && SPL_OF_PLATDATA
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index a5a524008b..726ae8a214 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -22,7 +22,6 @@
*/
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
-#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 150000000
#define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) }
#define CONFIG_CONS_INDEX 0
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 804b9e199c..3a27c15060 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -108,7 +108,6 @@
* DUART Serial Driver.
* Conflicts with AUART driver which can be set by board.
*/
-#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX 0
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 349232e1bf..c123e44d15 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -76,7 +76,6 @@
* Serial Configuration (PL011)
* CONFIG_PL01x_PORTS is defined in specific files
*/
-#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
#define CONFIG_CONS_INDEX 0
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 6203e14135..f18e2ee068 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -111,7 +111,6 @@
/* PL011 Serial Configuration */
#define CONFIG_CONS_INDEX 0
#define CONFIG_PL01X_SERIAL
-#define CONFIG_PL011_SERIAL
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_PL011_CLOCK 7273800
#else
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 294ca18186..94a352fef7 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -133,7 +133,6 @@
#define CONFIG_SYS_TIMER_COUNTS_DOWN
/* PL011 Serial Configuration */
-#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1}
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 7363057a5c..9990890a9a 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -38,7 +38,6 @@
#define CONFIG_SYS_SERIAL1 0xD0080000
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1 }
-#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
#define CONFIG_CONS_INDEX 0
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 5ee6b07c6d..a4159ebb36 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1627,7 +1627,6 @@ CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI
CONFIG_PIXIS_BRDCFG1_TDM
CONFIG_PIXIS_SGMII_CMD
CONFIG_PL011_CLOCK
-CONFIG_PL011_SERIAL
CONFIG_PL011_SERIAL_RLCR
CONFIG_PL01X_SERIAL
CONFIG_PL01x_PORTS
--
2.12.3
next prev parent reply other threads:[~2018-01-25 11:05 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-25 11:05 [U-Boot] [PATCH v3 00/15] RPi: Properly handle dynamic serial configuration Alexander Graf
2018-01-25 11:05 ` [U-Boot] [PATCH v3 01/15] serial: Use next serial device if probing fails Alexander Graf
2018-01-28 18:54 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-29 3:27 ` Derald D. Woods
2018-01-29 10:17 ` Alexander Graf
2018-01-29 22:40 ` Alexander Graf
2018-01-25 11:05 ` [U-Boot] [PATCH v3 02/15] rpi: Remove runtime disabling support for serial Alexander Graf
2018-01-28 18:54 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 03/15] serial: bcm283x_mu: Remove support for post-init disabling Alexander Graf
2018-01-28 18:54 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 04/15] rpi: Determine PL011/Mini-UART availability at runtime Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 05/15] serial_bcm283x_mu: Convert to dev_read Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 06/15] serial_bcm283x_mu: Always skip init Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot,v3,06/15] " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 07/15] serial_bcm283x_mu: Fail loading if not muxed Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 08/15] pl01x: Convert to dev_read Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot,v3,08/15] " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 09/15] pl010: Convert CONFIG_PL010_SERIAL to Kconfig Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` Alexander Graf [this message]
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, 10/15] pl011: Convert CONFIG_PL011_SERIAL " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 11/15] pl01x: Convert CONFIG_PL01X_SERIAL " Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 12/15] bcm2835_mu_serial: Convert " Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-31 8:34 ` [U-Boot] [PATCH v3 " Wolfgang Denk
2018-01-31 8:52 ` Alexander Graf
2018-01-31 13:04 ` Wolfgang Denk
2018-01-25 11:05 ` [U-Boot] [PATCH v3 14/15] bcm2835_pl011_serial: Add BCM2835 specific serial driver Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 15/15] bcm2835_pinctrl: Probe pre-reloc Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot,v3,15/15] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180125110556.76352-11-agraf@suse.de \
--to=agraf@suse.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox