From: Alexander Graf <agraf@suse.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 12/15] bcm2835_mu_serial: Convert to Kconfig
Date: Thu, 25 Jan 2018 12:05:53 +0100 [thread overview]
Message-ID: <20180125110556.76352-13-agraf@suse.de> (raw)
In-Reply-To: <20180125110556.76352-1-agraf@suse.de>
Setting config options using headers is deprecated. This patch converts
the BCM2835 Mini-UART to Kconfig.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
drivers/serial/Kconfig | 7 +++++++
include/configs/rpi.h | 3 ---
scripts/config_whitelist.txt | 1 -
3 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 4167683885..72281a7b64 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -388,6 +388,13 @@ config ATMEL_USART
configured in the device tree, and input clock frequency can
be got from the clk node.
+config BCM283X_MU_SERIAL
+ bool "Support for BCM283x Mini-UART"
+ depends on DM_SERIAL && ARCH_BCM283X
+ default y
+ help
+ Select this to enable Mini-UART support on BCM283X family of SoCs.
+
config BCM6345_SERIAL
bool "Support for BCM6345 UART"
depends on DM_SERIAL && ARCH_BMIPS
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 5ffe98015f..f2d3646753 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -75,9 +75,6 @@
#define CONFIG_MISC_INIT_R
#endif
-/* Console UART, can be configured dynamically in config.txt */
-#define CONFIG_BCM283X_MU_SERIAL
-
/* Console configuration */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 6e4e322986..5e02588066 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -121,7 +121,6 @@ CONFIG_BCH_CONST_M
CONFIG_BCH_CONST_PARAMS
CONFIG_BCH_CONST_T
CONFIG_BCM2835_GPIO
-CONFIG_BCM283X_MU_SERIAL
CONFIG_BIOSEMU
CONFIG_BITBANGMII_MULTI
CONFIG_BL1_OFFSET
--
2.12.3
next prev parent reply other threads:[~2018-01-25 11:05 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-25 11:05 [U-Boot] [PATCH v3 00/15] RPi: Properly handle dynamic serial configuration Alexander Graf
2018-01-25 11:05 ` [U-Boot] [PATCH v3 01/15] serial: Use next serial device if probing fails Alexander Graf
2018-01-28 18:54 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-29 3:27 ` Derald D. Woods
2018-01-29 10:17 ` Alexander Graf
2018-01-29 22:40 ` Alexander Graf
2018-01-25 11:05 ` [U-Boot] [PATCH v3 02/15] rpi: Remove runtime disabling support for serial Alexander Graf
2018-01-28 18:54 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 03/15] serial: bcm283x_mu: Remove support for post-init disabling Alexander Graf
2018-01-28 18:54 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 04/15] rpi: Determine PL011/Mini-UART availability at runtime Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 05/15] serial_bcm283x_mu: Convert to dev_read Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 06/15] serial_bcm283x_mu: Always skip init Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot,v3,06/15] " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 07/15] serial_bcm283x_mu: Fail loading if not muxed Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 08/15] pl01x: Convert to dev_read Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot,v3,08/15] " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 09/15] pl010: Convert CONFIG_PL010_SERIAL to Kconfig Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 10/15] pl011: Convert CONFIG_PL011_SERIAL " Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 11/15] pl01x: Convert CONFIG_PL01X_SERIAL " Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` Alexander Graf [this message]
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, 12/15] bcm2835_mu_serial: Convert " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-31 8:34 ` [U-Boot] [PATCH v3 " Wolfgang Denk
2018-01-31 8:52 ` Alexander Graf
2018-01-31 13:04 ` Wolfgang Denk
2018-01-25 11:05 ` [U-Boot] [PATCH v3 14/15] bcm2835_pl011_serial: Add BCM2835 specific serial driver Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 15/15] bcm2835_pinctrl: Probe pre-reloc Alexander Graf
2018-01-28 18:55 ` [U-Boot] [U-Boot,v3,15/15] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180125110556.76352-13-agraf@suse.de \
--to=agraf@suse.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox