From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Sun, 28 Jan 2018 13:52:53 -0500 Subject: [U-Boot] [U-Boot, 5/6] ARM: dts: stm32: Add STM32F429 Evaluation board support In-Reply-To: <1516279174-30005-6-git-send-email-patrice.chotard@st.com> References: <1516279174-30005-6-git-send-email-patrice.chotard@st.com> Message-ID: <20180128185253.GD20149@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de On Thu, Jan 18, 2018 at 01:39:33PM +0100, patrice.chotard at st.com wrote: > From: Patrice Chotard > > This DT file comes from kernel v4.15, this board offers : > > _ STM32F429NIH6 microcontroller > _ 4.3” color TFT LCD with resistive touchscreen (480 x 272 pixels) > _ Six 5 V power supply options: > Power jack > ST-LINK/V2 USB connector > User USB HS connector > User USB FS1 connector > User USB FS2 connector > Daughterboard > _ SAI Audio DAC, stereo audio jack which supports headset with > microphone > _ Stereo digital microphone, audio terminal connector used to connect > external speakers > _ 2 GBytes (or more) SDIO interface MicroSD card > _ RF EEPROM on I2 C compatible serial interface > _ RS-232 communication > _ IrDA transceiver > _ JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded > _ IEEE-802.3-2002 compliant Ethernet connector > _ Camera module > _ 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash > _ Joystick with 4-directional control and selector > _ Reset, Wakeup and Tamper buttons > _ 4 color user LEDs > _ Extension connectors & memory connectors for daughterboard or > wrapping board > _ USB OTG HS and FS with Micro-AB connectors > _ RTC with backup battery > _ CAN2.0A/B compliant connection > _ Potentiometer > _ Motor control connector > > Signed-off-by: Patrice Chotard Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: