From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Sun, 28 Jan 2018 13:55:16 -0500 Subject: [U-Boot] [U-Boot, v3, 07/15] serial_bcm283x_mu: Fail loading if not muxed In-Reply-To: <20180125110556.76352-8-agraf@suse.de> References: <20180125110556.76352-8-agraf@suse.de> Message-ID: <20180128185516.GJ20149@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Jan 25, 2018 at 12:05:48PM +0100, Alexander Graf wrote: > The bcm283x mini-uart is only really usable as U-Boot serial output > when it is muxed to the UART pins of the RPi pin header. > > So fail probing in case it is not muxed correctly, as in that case > firmware did not initialize it properly either. > > Signed-off-by: Alexander Graf Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: