* [U-Boot] [PATCH 1/3] phy: add support for bcm6348 usbh phy
2018-02-04 10:18 [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy Álvaro Fernández Rojas
@ 2018-02-04 10:18 ` Álvaro Fernández Rojas
2018-02-04 18:35 ` Daniel Schwierzeck
2018-03-17 19:30 ` Daniel Schwierzeck
2018-02-04 10:18 ` [U-Boot] [PATCH 2/3] mips: bmips: add support for bcm6348 usb Álvaro Fernández Rojas
` (2 subsequent siblings)
3 siblings, 2 replies; 8+ messages in thread
From: Álvaro Fernández Rojas @ 2018-02-04 10:18 UTC (permalink / raw)
To: u-boot
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
drivers/phy/Kconfig | 6 +++
drivers/phy/Makefile | 1 +
drivers/phy/bcm6348-usbh-phy.c | 94 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 101 insertions(+)
create mode 100644 drivers/phy/bcm6348-usbh-phy.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 3b9a09ce18..cec2130c05 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -59,6 +59,12 @@ config SPL_NOP_PHY
This is useful when a driver uses the PHY framework but no real PHY
hardware exists.
+config BCM6348_USBH_PHY
+ bool "BCM6348 USBH PHY support"
+ depends on PHY && ARCH_BMIPS
+ help
+ Support for the Broadcom MIPS BCM6348 USBH PHY.
+
config PIPE3_PHY
bool "Support omap's PIPE3 PHY"
depends on PHY && ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 668040b0bb..06e01e86eb 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
+obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o
obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
diff --git a/drivers/phy/bcm6348-usbh-phy.c b/drivers/phy/bcm6348-usbh-phy.c
new file mode 100644
index 0000000000..55e865c53d
--- /dev/null
+++ b/drivers/phy/bcm6348-usbh-phy.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ * Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+#define USBH_SETUP_PORT1_EN BIT(0)
+
+struct bcm6348_usbh_priv {
+ void __iomem *regs;
+};
+
+static int bcm6348_usbh_init(struct phy *phy)
+{
+ struct bcm6348_usbh_priv *priv = dev_get_priv(phy->dev);
+
+ writel_be(USBH_SETUP_PORT1_EN, priv->regs);
+
+ return 0;
+}
+
+static struct phy_ops bcm6348_usbh_ops = {
+ .init = bcm6348_usbh_init,
+};
+
+static const struct udevice_id bcm6348_usbh_ids[] = {
+ { .compatible = "brcm,bcm6348-usbh" },
+ { /* sentinel */ }
+};
+
+static int bcm6348_usbh_probe(struct udevice *dev)
+{
+ struct bcm6348_usbh_priv *priv = dev_get_priv(dev);
+ struct reset_ctl rst_ctl;
+ struct clk clk;
+ fdt_addr_t addr;
+ fdt_size_t size;
+ int ret;
+
+ addr = devfdt_get_addr_size_index(dev, 0, &size);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->regs = ioremap(addr, size);
+
+ /* enable usbh clock */
+ ret = clk_get_by_name(dev, "usbh", &clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_free(&clk);
+ if (ret < 0)
+ return ret;
+
+ /* perform reset */
+ ret = reset_get_by_index(dev, 0, &rst_ctl);
+ if (ret < 0)
+ return ret;
+
+ ret = reset_deassert(&rst_ctl);
+ if (ret < 0)
+ return ret;
+
+ ret = reset_free(&rst_ctl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+U_BOOT_DRIVER(bcm6348_usbh) = {
+ .name = "bcm6348-usbh",
+ .id = UCLASS_PHY,
+ .of_match = bcm6348_usbh_ids,
+ .ops = &bcm6348_usbh_ops,
+ .priv_auto_alloc_size = sizeof(struct bcm6348_usbh_priv),
+ .probe = bcm6348_usbh_probe,
+};
--
2.11.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* [U-Boot] [PATCH 1/3] phy: add support for bcm6348 usbh phy
2018-02-04 10:18 ` [U-Boot] [PATCH 1/3] phy: " Álvaro Fernández Rojas
@ 2018-02-04 18:35 ` Daniel Schwierzeck
2018-03-17 19:30 ` Daniel Schwierzeck
1 sibling, 0 replies; 8+ messages in thread
From: Daniel Schwierzeck @ 2018-02-04 18:35 UTC (permalink / raw)
To: u-boot
On 04.02.2018 11:18, Álvaro Fernández Rojas wrote:
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> drivers/phy/Kconfig | 6 +++
> drivers/phy/Makefile | 1 +
> drivers/phy/bcm6348-usbh-phy.c | 94 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 101 insertions(+)
> create mode 100644 drivers/phy/bcm6348-usbh-phy.c
>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
--
- Daniel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180204/eb4f1030/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 1/3] phy: add support for bcm6348 usbh phy
2018-02-04 10:18 ` [U-Boot] [PATCH 1/3] phy: " Álvaro Fernández Rojas
2018-02-04 18:35 ` Daniel Schwierzeck
@ 2018-03-17 19:30 ` Daniel Schwierzeck
2018-03-18 8:13 ` Álvaro Fernández Rojas
1 sibling, 1 reply; 8+ messages in thread
From: Daniel Schwierzeck @ 2018-03-17 19:30 UTC (permalink / raw)
To: u-boot
On 04.02.2018 11:18, Álvaro Fernández Rojas wrote:
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> drivers/phy/Kconfig | 6 +++
> drivers/phy/Makefile | 1 +
> drivers/phy/bcm6348-usbh-phy.c | 94 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 101 insertions(+)
> create mode 100644 drivers/phy/bcm6348-usbh-phy.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 3b9a09ce18..cec2130c05 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -59,6 +59,12 @@ config SPL_NOP_PHY
> This is useful when a driver uses the PHY framework but no real PHY
> hardware exists.
>
> +config BCM6348_USBH_PHY
> + bool "BCM6348 USBH PHY support"
> + depends on PHY && ARCH_BMIPS
> + help
> + Support for the Broadcom MIPS BCM6348 USBH PHY.
> +
> config PIPE3_PHY
> bool "Support omap's PIPE3 PHY"
> depends on PHY && ARCH_OMAP2PLUS
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 668040b0bb..06e01e86eb 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -7,6 +7,7 @@
>
> obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
> obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
> +obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o
> obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
> obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
> obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
> diff --git a/drivers/phy/bcm6348-usbh-phy.c b/drivers/phy/bcm6348-usbh-phy.c
> new file mode 100644
> index 0000000000..55e865c53d
> --- /dev/null
> +++ b/drivers/phy/bcm6348-usbh-phy.c
> @@ -0,0 +1,94 @@
> +/*
> + * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
> + *
> + * Derived from linux/arch/mips/bcm63xx/usb-common.c:
> + * Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
> + * Copyright 2013 Florian Fainelli <florian@openwrt.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <generic-phy.h>
> +#include <reset.h>
> +#include <asm/io.h>
> +#include <dm/device.h>
> +
> +#define USBH_SETUP_PORT1_EN BIT(0)
> +
> +struct bcm6348_usbh_priv {
> + void __iomem *regs;
> +};
> +
> +static int bcm6348_usbh_init(struct phy *phy)
> +{
> + struct bcm6348_usbh_priv *priv = dev_get_priv(phy->dev);
> +
> + writel_be(USBH_SETUP_PORT1_EN, priv->regs);
> +
> + return 0;
> +}
> +
> +static struct phy_ops bcm6348_usbh_ops = {
> + .init = bcm6348_usbh_init,
> +};
> +
> +static const struct udevice_id bcm6348_usbh_ids[] = {
> + { .compatible = "brcm,bcm6348-usbh" },
> + { /* sentinel */ }
> +};
> +
> +static int bcm6348_usbh_probe(struct udevice *dev)
> +{
> + struct bcm6348_usbh_priv *priv = dev_get_priv(dev);
> + struct reset_ctl rst_ctl;
> + struct clk clk;
> + fdt_addr_t addr;
> + fdt_size_t size;
> + int ret;
> +
> + addr = devfdt_get_addr_size_index(dev, 0, &size);
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> +
> + priv->regs = ioremap(addr, size);
since you started to convert the other BMIPS related drivers to
live-tree, shall I pick up the current patches and you send a separate
patch for the conversion later? Or do you want to resend a v2?
> +
> + /* enable usbh clock */
> + ret = clk_get_by_name(dev, "usbh", &clk);
> + if (ret < 0)
> + return ret;
> +
> + ret = clk_enable(&clk);
> + if (ret < 0)
> + return ret;
> +
> + ret = clk_free(&clk);
> + if (ret < 0)
> + return ret;
> +
> + /* perform reset */
> + ret = reset_get_by_index(dev, 0, &rst_ctl);
> + if (ret < 0)
> + return ret;
> +
> + ret = reset_deassert(&rst_ctl);
> + if (ret < 0)
> + return ret;
> +
> + ret = reset_free(&rst_ctl);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +U_BOOT_DRIVER(bcm6348_usbh) = {
> + .name = "bcm6348-usbh",
> + .id = UCLASS_PHY,
> + .of_match = bcm6348_usbh_ids,
> + .ops = &bcm6348_usbh_ops,
> + .priv_auto_alloc_size = sizeof(struct bcm6348_usbh_priv),
> + .probe = bcm6348_usbh_probe,
> +};
>
--
- Daniel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180317/8ee72e00/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread* [U-Boot] [PATCH 1/3] phy: add support for bcm6348 usbh phy
2018-03-17 19:30 ` Daniel Schwierzeck
@ 2018-03-18 8:13 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 8+ messages in thread
From: Álvaro Fernández Rojas @ 2018-03-18 8:13 UTC (permalink / raw)
To: u-boot
Hi Daniel,
El 17/03/2018 a las 20:30, Daniel Schwierzeck escribió:
>
> On 04.02.2018 11:18, Álvaro Fernández Rojas wrote:
>> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
>> ---
>> drivers/phy/Kconfig | 6 +++
>> drivers/phy/Makefile | 1 +
>> drivers/phy/bcm6348-usbh-phy.c | 94 ++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 101 insertions(+)
>> create mode 100644 drivers/phy/bcm6348-usbh-phy.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 3b9a09ce18..cec2130c05 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -59,6 +59,12 @@ config SPL_NOP_PHY
>> This is useful when a driver uses the PHY framework but no real PHY
>> hardware exists.
>>
>> +config BCM6348_USBH_PHY
>> + bool "BCM6348 USBH PHY support"
>> + depends on PHY && ARCH_BMIPS
>> + help
>> + Support for the Broadcom MIPS BCM6348 USBH PHY.
>> +
>> config PIPE3_PHY
>> bool "Support omap's PIPE3 PHY"
>> depends on PHY && ARCH_OMAP2PLUS
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index 668040b0bb..06e01e86eb 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -7,6 +7,7 @@
>>
>> obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
>> obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
>> +obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o
>> obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
>> obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
>> obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
>> diff --git a/drivers/phy/bcm6348-usbh-phy.c b/drivers/phy/bcm6348-usbh-phy.c
>> new file mode 100644
>> index 0000000000..55e865c53d
>> --- /dev/null
>> +++ b/drivers/phy/bcm6348-usbh-phy.c
>> @@ -0,0 +1,94 @@
>> +/*
>> + * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
>> + *
>> + * Derived from linux/arch/mips/bcm63xx/usb-common.c:
>> + * Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
>> + * Copyright 2013 Florian Fainelli <florian@openwrt.org>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <clk.h>
>> +#include <dm.h>
>> +#include <generic-phy.h>
>> +#include <reset.h>
>> +#include <asm/io.h>
>> +#include <dm/device.h>
>> +
>> +#define USBH_SETUP_PORT1_EN BIT(0)
>> +
>> +struct bcm6348_usbh_priv {
>> + void __iomem *regs;
>> +};
>> +
>> +static int bcm6348_usbh_init(struct phy *phy)
>> +{
>> + struct bcm6348_usbh_priv *priv = dev_get_priv(phy->dev);
>> +
>> + writel_be(USBH_SETUP_PORT1_EN, priv->regs);
>> +
>> + return 0;
>> +}
>> +
>> +static struct phy_ops bcm6348_usbh_ops = {
>> + .init = bcm6348_usbh_init,
>> +};
>> +
>> +static const struct udevice_id bcm6348_usbh_ids[] = {
>> + { .compatible = "brcm,bcm6348-usbh" },
>> + { /* sentinel */ }
>> +};
>> +
>> +static int bcm6348_usbh_probe(struct udevice *dev)
>> +{
>> + struct bcm6348_usbh_priv *priv = dev_get_priv(dev);
>> + struct reset_ctl rst_ctl;
>> + struct clk clk;
>> + fdt_addr_t addr;
>> + fdt_size_t size;
>> + int ret;
>> +
>> + addr = devfdt_get_addr_size_index(dev, 0, &size);
>> + if (addr == FDT_ADDR_T_NONE)
>> + return -EINVAL;
>> +
>> + priv->regs = ioremap(addr, size);
> since you started to convert the other BMIPS related drivers to
> live-tree, shall I pick up the current patches and you send a separate
> patch for the conversion later? Or do you want to resend a v2?
You can pick the current patches and I will send a conversion patch
later :).
>
>> +
>> + /* enable usbh clock */
>> + ret = clk_get_by_name(dev, "usbh", &clk);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = clk_enable(&clk);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = clk_free(&clk);
>> + if (ret < 0)
>> + return ret;
>> +
>> + /* perform reset */
>> + ret = reset_get_by_index(dev, 0, &rst_ctl);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = reset_deassert(&rst_ctl);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = reset_free(&rst_ctl);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +U_BOOT_DRIVER(bcm6348_usbh) = {
>> + .name = "bcm6348-usbh",
>> + .id = UCLASS_PHY,
>> + .of_match = bcm6348_usbh_ids,
>> + .ops = &bcm6348_usbh_ops,
>> + .priv_auto_alloc_size = sizeof(struct bcm6348_usbh_priv),
>> + .probe = bcm6348_usbh_probe,
>> +};
>>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 2/3] mips: bmips: add support for bcm6348 usb
2018-02-04 10:18 [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy Álvaro Fernández Rojas
2018-02-04 10:18 ` [U-Boot] [PATCH 1/3] phy: " Álvaro Fernández Rojas
@ 2018-02-04 10:18 ` Álvaro Fernández Rojas
2018-02-04 10:18 ` [U-Boot] [PATCH 3/3] mips: bmips: add ct-5361 usb support Álvaro Fernández Rojas
2018-03-18 23:55 ` [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy Daniel Schwierzeck
3 siblings, 0 replies; 8+ messages in thread
From: Álvaro Fernández Rojas @ 2018-02-04 10:18 UTC (permalink / raw)
To: u-boot
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/dts/brcm,bcm6348.dtsi | 20 ++++++++++++++++++++
include/configs/bmips_bcm6348.h | 5 +++++
2 files changed, 25 insertions(+)
diff --git a/arch/mips/dts/brcm,bcm6348.dtsi b/arch/mips/dts/brcm,bcm6348.dtsi
index 540b9fea5b..92fb91afc1 100644
--- a/arch/mips/dts/brcm,bcm6348.dtsi
+++ b/arch/mips/dts/brcm,bcm6348.dtsi
@@ -135,6 +135,26 @@
status = "disabled";
};
+ ohci: usb-controller at fffe1b00 {
+ compatible = "brcm,bcm6348-ohci", "generic-ohci";
+ reg = <0xfffe1b00 0x100>;
+ phys = <&usbh>;
+ big-endian;
+
+ status = "disabled";
+ };
+
+ usbh: usb-phy at fffe1c00 {
+ compatible = "brcm,bcm6348-usbh";
+ reg = <0xfffe1c00 0x4>;
+ #phy-cells = <0>;
+ clocks = <&periph_clk BCM6348_CLK_USBH>;
+ clock-names = "usbh";
+ resets = <&periph_rst BCM6348_RST_USBH>;
+
+ status = "disabled";
+ };
+
memory-controller at fffe2300 {
compatible = "brcm,bcm6338-mc";
reg = <0xfffe2300 0x38>;
diff --git a/include/configs/bmips_bcm6348.h b/include/configs/bmips_bcm6348.h
index e9f53d6811..6c9c33b822 100644
--- a/include/configs/bmips_bcm6348.h
+++ b/include/configs/bmips_bcm6348.h
@@ -14,6 +14,11 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x80000000
+/* USB */
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
/* U-Boot */
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
--
2.11.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* [U-Boot] [PATCH 3/3] mips: bmips: add ct-5361 usb support
2018-02-04 10:18 [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy Álvaro Fernández Rojas
2018-02-04 10:18 ` [U-Boot] [PATCH 1/3] phy: " Álvaro Fernández Rojas
2018-02-04 10:18 ` [U-Boot] [PATCH 2/3] mips: bmips: add support for bcm6348 usb Álvaro Fernández Rojas
@ 2018-02-04 10:18 ` Álvaro Fernández Rojas
2018-03-18 23:55 ` [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy Daniel Schwierzeck
3 siblings, 0 replies; 8+ messages in thread
From: Álvaro Fernández Rojas @ 2018-02-04 10:18 UTC (permalink / raw)
To: u-boot
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/dts/comtrend,ct-5361.dts | 8 ++++++++
configs/comtrend_ct5361_ram_defconfig | 7 +++++++
2 files changed, 15 insertions(+)
diff --git a/arch/mips/dts/comtrend,ct-5361.dts b/arch/mips/dts/comtrend,ct-5361.dts
index c909a528a9..74dc09046c 100644
--- a/arch/mips/dts/comtrend,ct-5361.dts
+++ b/arch/mips/dts/comtrend,ct-5361.dts
@@ -39,6 +39,10 @@
status = "okay";
};
+&ohci {
+ status = "okay";
+};
+
&pflash {
status = "okay";
};
@@ -47,3 +51,7 @@
u-boot,dm-pre-reloc;
status = "okay";
};
+
+&usbh {
+ status = "okay";
+};
diff --git a/configs/comtrend_ct5361_ram_defconfig b/configs/comtrend_ct5361_ram_defconfig
index 1dfefcb379..8b842606f5 100644
--- a/configs/comtrend_ct5361_ram_defconfig
+++ b/configs/comtrend_ct5361_ram_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_LICENSE=y
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
@@ -37,9 +38,15 @@ CONFIG_LED_GPIO=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_CFI_FLASH=y
+CONFIG_PHY=y
+CONFIG_BCM6348_USBH_PHY=y
CONFIG_DM_RESET=y
CONFIG_RESET_BCM6345=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DM_SERIAL=y
CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
CONFIG_WDT_BCM6345=y
--
2.11.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy
2018-02-04 10:18 [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy Álvaro Fernández Rojas
` (2 preceding siblings ...)
2018-02-04 10:18 ` [U-Boot] [PATCH 3/3] mips: bmips: add ct-5361 usb support Álvaro Fernández Rojas
@ 2018-03-18 23:55 ` Daniel Schwierzeck
3 siblings, 0 replies; 8+ messages in thread
From: Daniel Schwierzeck @ 2018-03-18 23:55 UTC (permalink / raw)
To: u-boot
On 04.02.2018 11:18, Álvaro Fernández Rojas wrote:
> Add support for BCM6348 usbh phy.
>
> Álvaro Fernández Rojas (3):
> phy: add support for bcm6348 usbh phy
> mips: bmips: add support for bcm6348 usb
> mips: bmips: add ct-5361 usb support
>
> arch/mips/dts/brcm,bcm6348.dtsi | 20 ++++++++
> arch/mips/dts/comtrend,ct-5361.dts | 8 +++
> configs/comtrend_ct5361_ram_defconfig | 7 +++
> drivers/phy/Kconfig | 6 +++
> drivers/phy/Makefile | 1 +
> drivers/phy/bcm6348-usbh-phy.c | 94 +++++++++++++++++++++++++++++++++++
> include/configs/bmips_bcm6348.h | 5 ++
> 7 files changed, 141 insertions(+)
> create mode 100644 drivers/phy/bcm6348-usbh-phy.c
>
applied to u-boot-mips, thanks.
--
- Daniel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180319/34e42b71/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread