[U-Boot] [PATCH 0/3] bmips: add support for bcm6318 usbh phy

[U-Boot] [PATCH 0/3] bmips: add support for bcm6318 usbh phy

[Álvaro Fernández Rojas]

Add support for BCM6318 usbh phy.

Álvaro Fernández Rojas (3):
  phy: add support for bcm6318 usbh phy
  mips: bmips: add support for bcm6318 usb
  mips: bmips: add ar-5315 usb support

 arch/mips/dts/brcm,bcm6318.dtsi        |  30 +++++++
 arch/mips/dts/comtrend,ar-5315u.dts    |  12 +++
 configs/comtrend_ar5315u_ram_defconfig |   9 +++
 drivers/phy/Kconfig                    |   7 ++
 drivers/phy/Makefile                   |   1 +
 drivers/phy/bcm6318-usbh-phy.c         | 144 +++++++++++++++++++++++++++++++++
 include/configs/bmips_bcm6318.h        |   7 ++
 7 files changed, 210 insertions(+)
 create mode 100644 drivers/phy/bcm6318-usbh-phy.c

-- 
2.11.0

[U-Boot] [PATCH 1/3] phy: add support for bcm6318 usbh phy

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/phy/Kconfig            |   7 ++
 drivers/phy/Makefile           |   1 +
 drivers/phy/bcm6318-usbh-phy.c | 144 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 152 insertions(+)
 create mode 100644 drivers/phy/bcm6318-usbh-phy.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index d3fa9ded2a..4e9d09910c 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -59,6 +59,13 @@ config SPL_NOP_PHY
 	  This is useful when a driver uses the PHY framework but no real PHY
 	  hardware exists.
 
+config BCM6318_USBH_PHY
+	bool "BCM6318 USBH PHY support"
+	depends on PHY && ARCH_BMIPS
+	select POWER_DOMAIN
+	help
+	  Support for the Broadcom MIPS BCM6318 USBH PHY.
+
 config BCM6348_USBH_PHY
 	bool "BCM6348 USBH PHY support"
 	depends on PHY && ARCH_BMIPS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d8239854a3..68087ae3b1 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -7,6 +7,7 @@
 
 obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
 obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
+obj-$(CONFIG_BCM6318_USBH_PHY) += bcm6318-usbh-phy.o
 obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o
 obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o
 obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o
diff --git a/drivers/phy/bcm6318-usbh-phy.c b/drivers/phy/bcm6318-usbh-phy.c
new file mode 100644
index 0000000000..9f22269ced
--- /dev/null
+++ b/drivers/phy/bcm6318-usbh-phy.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ *	Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
+ *	Copyright 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <power-domain.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+/* USBH Setup register */
+#define USBH_SETUP_REG		0x00
+#define USBH_SETUP_IOC		BIT(4)
+
+/* USBH PLL Control register */
+#define USBH_PLL_REG		0x04
+#define USBH_PLL_SUSP_EN	BIT(27)
+#define USBH_PLL_IDDQ_PWRDN	BIT(31)
+
+/* USBH Swap Control register */
+#define USBH_SWAP_REG		0x0c
+#define USBH_SWAP_OHCI_DATA	BIT(0)
+#define USBH_SWAP_OHCI_ENDIAN	BIT(1)
+#define USBH_SWAP_EHCI_DATA	BIT(3)
+#define USBH_SWAP_EHCI_ENDIAN	BIT(4)
+
+/* USBH Sim Control register */
+#define USBH_SIM_REG		0x20
+#define USBH_SIM_LADDR		BIT(5)
+
+struct bcm6318_usbh_priv {
+	void __iomem *regs;
+};
+
+static int bcm6318_usbh_init(struct phy *phy)
+{
+	struct bcm6318_usbh_priv *priv = dev_get_priv(phy->dev);
+
+	/* enable pll control susp */
+	setbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_SUSP_EN);
+
+	/* configure to work in native cpu endian */
+	clrsetbits_be32(priv->regs + USBH_SWAP_REG,
+			USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
+			USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
+
+	/* setup config */
+	setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC);
+
+	/* disable pll control pwrdn */
+	clrbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_IDDQ_PWRDN);
+
+	/* sim control config */
+	setbits_be32(priv->regs + USBH_SIM_REG, USBH_SIM_LADDR);
+
+	return 0;
+}
+
+static struct phy_ops bcm6318_usbh_ops = {
+	.init = bcm6318_usbh_init,
+};
+
+static const struct udevice_id bcm6318_usbh_ids[] = {
+	{ .compatible = "brcm,bcm6318-usbh" },
+	{ /* sentinel */ }
+};
+
+static int bcm6318_usbh_probe(struct udevice *dev)
+{
+	struct bcm6318_usbh_priv *priv = dev_get_priv(dev);
+	struct power_domain pwr_dom;
+	struct reset_ctl rst_ctl;
+	struct clk clk;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = ioremap(addr, size);
+
+	/* enable usbh clock */
+	ret = clk_get_by_name(dev, "usbh", &clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_free(&clk);
+	if (ret < 0)
+		return ret;
+
+	/* enable power domain */
+	ret = power_domain_get(dev, &pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_on(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_free(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	/* perform reset */
+	ret = reset_get_by_index(dev, 0, &rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_deassert(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_free(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	mdelay(100);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(bcm6318_usbh) = {
+	.name = "bcm6318-usbh",
+	.id = UCLASS_PHY,
+	.of_match = bcm6318_usbh_ids,
+	.ops = &bcm6318_usbh_ops,
+	.priv_auto_alloc_size = sizeof(struct bcm6318_usbh_priv),
+	.probe = bcm6318_usbh_probe,
+};
-- 
2.11.0

[U-Boot] [PATCH 1/3] phy: add support for bcm6318 usbh phy

[Daniel Schwierzeck]

On 04.02.2018 11:19, Álvaro Fernández Rojas wrote:
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
>  drivers/phy/Kconfig            |   7 ++
>  drivers/phy/Makefile           |   1 +
>  drivers/phy/bcm6318-usbh-phy.c | 144 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 152 insertions(+)
>  create mode 100644 drivers/phy/bcm6318-usbh-phy.c
> 

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180204/69078684/attachment.sig>

[U-Boot] [PATCH 2/3] mips: bmips: add support for bcm6318 usb

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/dts/brcm,bcm6318.dtsi | 30 ++++++++++++++++++++++++++++++
 include/configs/bmips_bcm6318.h |  7 +++++++
 2 files changed, 37 insertions(+)

diff --git a/arch/mips/dts/brcm,bcm6318.dtsi b/arch/mips/dts/brcm,bcm6318.dtsi
index 54964a7009..015acc9173 100644
--- a/arch/mips/dts/brcm,bcm6318.dtsi
+++ b/arch/mips/dts/brcm,bcm6318.dtsi
@@ -153,5 +153,35 @@
 			reg = <0x10004000 0x38>;
 			u-boot,dm-pre-reloc;
 		};
+
+		ehci: usb-controller at 10005000 {
+			compatible = "brcm,bcm6318-ehci", "generic-ehci";
+			reg = <0x10005000 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		ohci: usb-controller at 10005100 {
+			compatible = "brcm,bcm6318-ohci", "generic-ohci";
+			reg = <0x10005100 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy at 10005200 {
+			compatible = "brcm,bcm6318-usbh";
+			reg = <0x10005200 0x30>;
+			#phy-cells = <0>;
+			clocks = <&periph_clk BCM6318_CLK_USB>;
+			clock-names = "usbh";
+			power-domains = <&periph_pwr BCM6318_PWR_USB>;
+			resets = <&periph_rst BCM6318_RST_USBH>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/include/configs/bmips_bcm6318.h b/include/configs/bmips_bcm6318.h
index 454a7b7f7b..5541cc5cf6 100644
--- a/include/configs/bmips_bcm6318.h
+++ b/include/configs/bmips_bcm6318.h
@@ -14,6 +14,13 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
+/* USB */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
 /* U-Boot */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
 
-- 
2.11.0

[U-Boot] [PATCH 3/3] mips: bmips: add ar-5315 usb support

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/dts/comtrend,ar-5315u.dts    | 12 ++++++++++++
 configs/comtrend_ar5315u_ram_defconfig |  9 +++++++++
 2 files changed, 21 insertions(+)

diff --git a/arch/mips/dts/comtrend,ar-5315u.dts b/arch/mips/dts/comtrend,ar-5315u.dts
index 4e4d69b638..af3159a03a 100644
--- a/arch/mips/dts/comtrend,ar-5315u.dts
+++ b/arch/mips/dts/comtrend,ar-5315u.dts
@@ -21,6 +21,10 @@
 	};
 };
 
+&ehci {
+	status = "okay";
+};
+
 &leds {
 	status = "okay";
 
@@ -67,6 +71,10 @@
 	};
 };
 
+&ohci {
+	status = "okay";
+};
+
 &spi {
 	status = "okay";
 
@@ -83,3 +91,7 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};
diff --git a/configs/comtrend_ar5315u_ram_defconfig b/configs/comtrend_ar5315u_ram_defconfig
index c83234a98b..1c3595d2b4 100644
--- a/configs/comtrend_ar5315u_ram_defconfig
+++ b/configs/comtrend_ar5315u_ram_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_NET is not set
 # CONFIG_CMD_NFS is not set
 # CONFIG_CMD_MISC is not set
@@ -41,6 +42,8 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY=y
+CONFIG_BCM6358_USBH_PHY=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_BCM6328_POWER_DOMAIN=y
 CONFIG_DM_RESET=y
@@ -50,3 +53,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
 CONFIG_DM_SPI=y
 CONFIG_BCM63XX_HSSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
-- 
2.11.0

[U-Boot] [PATCH v2 0/3] bmips: add support for bcm6318 usbh phy

[Álvaro Fernández Rojas]

Add support for BCM6318 usbh phy.

v2: use correct phy driver

Álvaro Fernández Rojas (3):
  phy: add support for bcm6318 usbh phy
  mips: bmips: add support for bcm6318 usb
  mips: bmips: add ar-5315 usb support

 arch/mips/dts/brcm,bcm6318.dtsi        |  30 +++++++
 arch/mips/dts/comtrend,ar-5315u.dts    |  12 +++
 configs/comtrend_ar5315u_ram_defconfig |   9 +++
 drivers/phy/Kconfig                    |   7 ++
 drivers/phy/Makefile                   |   1 +
 drivers/phy/bcm6318-usbh-phy.c         | 144 +++++++++++++++++++++++++++++++++
 include/configs/bmips_bcm6318.h        |   7 ++
 7 files changed, 210 insertions(+)
 create mode 100644 drivers/phy/bcm6318-usbh-phy.c

-- 
2.11.0

[U-Boot] [PATCH v2 1/3] phy: add support for bcm6318 usbh phy

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
 v2: no changes

 drivers/phy/Kconfig            |   7 ++
 drivers/phy/Makefile           |   1 +
 drivers/phy/bcm6318-usbh-phy.c | 144 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 152 insertions(+)
 create mode 100644 drivers/phy/bcm6318-usbh-phy.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index d3fa9ded2a..4e9d09910c 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -59,6 +59,13 @@ config SPL_NOP_PHY
 	  This is useful when a driver uses the PHY framework but no real PHY
 	  hardware exists.
 
+config BCM6318_USBH_PHY
+	bool "BCM6318 USBH PHY support"
+	depends on PHY && ARCH_BMIPS
+	select POWER_DOMAIN
+	help
+	  Support for the Broadcom MIPS BCM6318 USBH PHY.
+
 config BCM6348_USBH_PHY
 	bool "BCM6348 USBH PHY support"
 	depends on PHY && ARCH_BMIPS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d8239854a3..68087ae3b1 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -7,6 +7,7 @@
 
 obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
 obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
+obj-$(CONFIG_BCM6318_USBH_PHY) += bcm6318-usbh-phy.o
 obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o
 obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o
 obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o
diff --git a/drivers/phy/bcm6318-usbh-phy.c b/drivers/phy/bcm6318-usbh-phy.c
new file mode 100644
index 0000000000..9f22269ced
--- /dev/null
+++ b/drivers/phy/bcm6318-usbh-phy.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ *	Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
+ *	Copyright 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <power-domain.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+/* USBH Setup register */
+#define USBH_SETUP_REG		0x00
+#define USBH_SETUP_IOC		BIT(4)
+
+/* USBH PLL Control register */
+#define USBH_PLL_REG		0x04
+#define USBH_PLL_SUSP_EN	BIT(27)
+#define USBH_PLL_IDDQ_PWRDN	BIT(31)
+
+/* USBH Swap Control register */
+#define USBH_SWAP_REG		0x0c
+#define USBH_SWAP_OHCI_DATA	BIT(0)
+#define USBH_SWAP_OHCI_ENDIAN	BIT(1)
+#define USBH_SWAP_EHCI_DATA	BIT(3)
+#define USBH_SWAP_EHCI_ENDIAN	BIT(4)
+
+/* USBH Sim Control register */
+#define USBH_SIM_REG		0x20
+#define USBH_SIM_LADDR		BIT(5)
+
+struct bcm6318_usbh_priv {
+	void __iomem *regs;
+};
+
+static int bcm6318_usbh_init(struct phy *phy)
+{
+	struct bcm6318_usbh_priv *priv = dev_get_priv(phy->dev);
+
+	/* enable pll control susp */
+	setbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_SUSP_EN);
+
+	/* configure to work in native cpu endian */
+	clrsetbits_be32(priv->regs + USBH_SWAP_REG,
+			USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
+			USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
+
+	/* setup config */
+	setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC);
+
+	/* disable pll control pwrdn */
+	clrbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_IDDQ_PWRDN);
+
+	/* sim control config */
+	setbits_be32(priv->regs + USBH_SIM_REG, USBH_SIM_LADDR);
+
+	return 0;
+}
+
+static struct phy_ops bcm6318_usbh_ops = {
+	.init = bcm6318_usbh_init,
+};
+
+static const struct udevice_id bcm6318_usbh_ids[] = {
+	{ .compatible = "brcm,bcm6318-usbh" },
+	{ /* sentinel */ }
+};
+
+static int bcm6318_usbh_probe(struct udevice *dev)
+{
+	struct bcm6318_usbh_priv *priv = dev_get_priv(dev);
+	struct power_domain pwr_dom;
+	struct reset_ctl rst_ctl;
+	struct clk clk;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = ioremap(addr, size);
+
+	/* enable usbh clock */
+	ret = clk_get_by_name(dev, "usbh", &clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_free(&clk);
+	if (ret < 0)
+		return ret;
+
+	/* enable power domain */
+	ret = power_domain_get(dev, &pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_on(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_free(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	/* perform reset */
+	ret = reset_get_by_index(dev, 0, &rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_deassert(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_free(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	mdelay(100);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(bcm6318_usbh) = {
+	.name = "bcm6318-usbh",
+	.id = UCLASS_PHY,
+	.of_match = bcm6318_usbh_ids,
+	.ops = &bcm6318_usbh_ops,
+	.priv_auto_alloc_size = sizeof(struct bcm6318_usbh_priv),
+	.probe = bcm6318_usbh_probe,
+};
-- 
2.11.0

[U-Boot] [PATCH v2 2/3] mips: bmips: add support for bcm6318 usb

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 v2: no changes

 arch/mips/dts/brcm,bcm6318.dtsi | 30 ++++++++++++++++++++++++++++++
 include/configs/bmips_bcm6318.h |  7 +++++++
 2 files changed, 37 insertions(+)

diff --git a/arch/mips/dts/brcm,bcm6318.dtsi b/arch/mips/dts/brcm,bcm6318.dtsi
index 54964a7009..015acc9173 100644
--- a/arch/mips/dts/brcm,bcm6318.dtsi
+++ b/arch/mips/dts/brcm,bcm6318.dtsi
@@ -153,5 +153,35 @@
 			reg = <0x10004000 0x38>;
 			u-boot,dm-pre-reloc;
 		};
+
+		ehci: usb-controller at 10005000 {
+			compatible = "brcm,bcm6318-ehci", "generic-ehci";
+			reg = <0x10005000 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		ohci: usb-controller at 10005100 {
+			compatible = "brcm,bcm6318-ohci", "generic-ohci";
+			reg = <0x10005100 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy at 10005200 {
+			compatible = "brcm,bcm6318-usbh";
+			reg = <0x10005200 0x30>;
+			#phy-cells = <0>;
+			clocks = <&periph_clk BCM6318_CLK_USB>;
+			clock-names = "usbh";
+			power-domains = <&periph_pwr BCM6318_PWR_USB>;
+			resets = <&periph_rst BCM6318_RST_USBH>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/include/configs/bmips_bcm6318.h b/include/configs/bmips_bcm6318.h
index 454a7b7f7b..5541cc5cf6 100644
--- a/include/configs/bmips_bcm6318.h
+++ b/include/configs/bmips_bcm6318.h
@@ -14,6 +14,13 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
+/* USB */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
 /* U-Boot */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
 
-- 
2.11.0

[U-Boot] [PATCH v2 3/3] mips: bmips: add ar-5315 usb support

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 v2: use correct phy driver

 arch/mips/dts/comtrend,ar-5315u.dts    | 12 ++++++++++++
 configs/comtrend_ar5315u_ram_defconfig |  9 +++++++++
 2 files changed, 21 insertions(+)

diff --git a/arch/mips/dts/comtrend,ar-5315u.dts b/arch/mips/dts/comtrend,ar-5315u.dts
index 4e4d69b638..af3159a03a 100644
--- a/arch/mips/dts/comtrend,ar-5315u.dts
+++ b/arch/mips/dts/comtrend,ar-5315u.dts
@@ -21,6 +21,10 @@
 	};
 };
 
+&ehci {
+	status = "okay";
+};
+
 &leds {
 	status = "okay";
 
@@ -67,6 +71,10 @@
 	};
 };
 
+&ohci {
+	status = "okay";
+};
+
 &spi {
 	status = "okay";
 
@@ -83,3 +91,7 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};
diff --git a/configs/comtrend_ar5315u_ram_defconfig b/configs/comtrend_ar5315u_ram_defconfig
index c83234a98b..586074c08e 100644
--- a/configs/comtrend_ar5315u_ram_defconfig
+++ b/configs/comtrend_ar5315u_ram_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_NET is not set
 # CONFIG_CMD_NFS is not set
 # CONFIG_CMD_MISC is not set
@@ -41,6 +42,8 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY=y
+CONFIG_BCM6318_USBH_PHY=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_BCM6328_POWER_DOMAIN=y
 CONFIG_DM_RESET=y
@@ -50,3 +53,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
 CONFIG_DM_SPI=y
 CONFIG_BCM63XX_HSSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
-- 
2.11.0

[U-Boot] [PATCH v2 0/3] bmips: add support for bcm6318 usbh phy

[Daniel Schwierzeck]

On 04.02.2018 21:11, Álvaro Fernández Rojas wrote:
> Add support for BCM6318 usbh phy.
> 
> v2: use correct phy driver
> 
> Álvaro Fernández Rojas (3):
>   phy: add support for bcm6318 usbh phy
>   mips: bmips: add support for bcm6318 usb
>   mips: bmips: add ar-5315 usb support
> 
>  arch/mips/dts/brcm,bcm6318.dtsi        |  30 +++++++
>  arch/mips/dts/comtrend,ar-5315u.dts    |  12 +++
>  configs/comtrend_ar5315u_ram_defconfig |   9 +++
>  drivers/phy/Kconfig                    |   7 ++
>  drivers/phy/Makefile                   |   1 +
>  drivers/phy/bcm6318-usbh-phy.c         | 144 +++++++++++++++++++++++++++++++++
>  include/configs/bmips_bcm6318.h        |   7 ++
>  7 files changed, 210 insertions(+)
>  create mode 100644 drivers/phy/bcm6318-usbh-phy.c
> 

applied to u-boot-mips, thanks.

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180319/2dad9f03/attachment.sig>