From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Date: Sun, 11 Feb 2018 20:09:17 +0100 [thread overview]
Message-ID: <20180211200917.68813797@jawa> (raw)
In-Reply-To: <1518350813-3418-5-git-send-email-alex.kiernan@gmail.com>
On Sun, 11 Feb 2018 12:06:49 +0000
Alex Kiernan <alex.kiernan@gmail.com> wrote:
> This converts the following to Kconfig:
> CONFIG_BOOTCOUNT_ENV
>
> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
> ---
>
> README | 11 -----------
> configs/draco_defconfig | 1 +
> configs/etamin_defconfig | 1 +
> configs/pxm2_defconfig | 1 +
> configs/rastaban_defconfig | 1 +
> configs/rut_defconfig | 1 +
> configs/thuban_defconfig | 1 +
> drivers/bootcount/Kconfig | 12 ++++++++++++
> include/configs/siemens-am33x-common.h | 2 --
> scripts/config_whitelist.txt | 1 -
> 10 files changed, 18 insertions(+), 14 deletions(-)
>
> diff --git a/README b/README
> index f51f670..0581b58 100644
> --- a/README
> +++ b/README
> @@ -714,17 +714,6 @@ The following options need to be configured:
> RAM and NFS.
>
> - Bootcount:
> - CONFIG_BOOTCOUNT_ENV
> - If no softreset save registers are found on the
> hardware
> - "bootcount" is stored in the environment. To prevent
> a
> - saveenv on all reboots, the environment variable
> - "upgrade_available" is used. If "upgrade_available"
> is
> - 0, "bootcount" is always 0, if "upgrade_available" is
> - 1 "bootcount" is incremented in the environment.
> - So the Userspace Applikation must set the
> "upgrade_available"
> - and "bootcount" variable to 0, if a boot was
> successfully. -
> -- Pre-Boot Commands:
> CONFIG_PREBOOT
>
> When this option is #defined, the existence of the
> diff --git a/configs/draco_defconfig b/configs/draco_defconfig
> index 693d91c..0416daa 100644
> --- a/configs/draco_defconfig
> +++ b/configs/draco_defconfig
> @@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
> index e7a3d22..7d639ea 100644
> --- a/configs/etamin_defconfig
> +++ b/configs/etamin_defconfig
> @@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
> index 6063259..90783b4 100644
> --- a/configs/pxm2_defconfig
> +++ b/configs/pxm2_defconfig
> @@ -55,6 +55,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig
> index ce6981e..c0947e9 100644
> --- a/configs/rastaban_defconfig
> +++ b/configs/rastaban_defconfig
> @@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/rut_defconfig b/configs/rut_defconfig
> index b31eb97..685b4c8 100644
> --- a/configs/rut_defconfig
> +++ b/configs/rut_defconfig
> @@ -56,6 +56,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig
> index 4a3c0cd..f5d1077 100644
> --- a/configs/thuban_defconfig
> +++ b/configs/thuban_defconfig
> @@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
> CONFIG_OF_EMBED=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> CONFIG_DFU_NAND=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
> index e905295..40a0755 100644
> --- a/drivers/bootcount/Kconfig
> +++ b/drivers/bootcount/Kconfig
> @@ -28,6 +28,18 @@ config BOOTCOUNT_AM33XX
> This requires the RTC clocks, etc, to be enabled prior to
> use and not all boards with this IP block on it will have the RTC in
> use.
> +config BOOTCOUNT_ENV
> + bool "Boot counter in environment"
> + help
> + If no softreset save registers are found on the hardware
> + "bootcount" is stored in the environment. To prevent a
> + saveenv on all reboots, the environment variable
> + "upgrade_available" is used. If "upgrade_available" is
> + 0, "bootcount" is always 0, if "upgrade_available" is
> + 1 "bootcount" is incremented in the environment.
> + So the Userspace Application must set the
> "upgrade_available"
> + and "bootcount" variable to 0, if a boot was successfully.
> +
> endchoice
>
> config SYS_BOOTCOUNT_SINGLEWORD
> diff --git a/include/configs/siemens-am33x-common.h
> b/include/configs/siemens-am33x-common.h index eb4b1f6..a7b427f 100644
> --- a/include/configs/siemens-am33x-common.h
> +++ b/include/configs/siemens-am33x-common.h
> @@ -500,6 +500,4 @@
> #define CONFIG_RESET_TO_RETRY
> #define CONFIG_BOOT_RETRY_TIME 60
>
> -#define CONFIG_BOOTCOUNT_ENV
> -
> #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
> diff --git a/scripts/config_whitelist.txt
> b/scripts/config_whitelist.txt index 46d9d5c..0fd4ad6 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -148,7 +148,6 @@ CONFIG_BOOGER
> CONFIG_BOOM
> CONFIG_BOOTBLOCK
> CONFIG_BOOTCOUNT_ALEN
> -CONFIG_BOOTCOUNT_ENV
> CONFIG_BOOTCOUNT_I2C
> CONFIG_BOOTCOUNT_LIMIT
> CONFIG_BOOTCOUNT_RAM
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180211/829385ff/attachment.sig>
next prev parent reply other threads:[~2018-02-11 19:09 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1518350813-3418-1-git-send-email-alex.kiernan@gmail.com>
2018-02-11 12:06 ` [U-Boot] [PATCH 1/8] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT Alex Kiernan
2018-02-11 19:08 ` Lukasz Majewski
2018-02-16 2:13 ` Heinrich Schuchardt
2018-02-12 7:29 ` [U-Boot] EXT: " Ray, Ian
2018-02-11 12:06 ` [U-Boot] [PATCH 2/8] Prepare for multiple bootcount drivers Alex Kiernan
2018-02-11 19:08 ` Lukasz Majewski
2018-02-11 12:06 ` [U-Boot] [PATCH 3/8] Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig Alex Kiernan
2018-02-11 19:08 ` Lukasz Majewski
2018-02-12 7:58 ` [U-Boot] Antwort: " Hannes Schmelzer
2018-02-11 12:06 ` [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV " Alex Kiernan
2018-02-11 19:09 ` Lukasz Majewski [this message]
2018-02-13 9:30 ` Lukasz Majewski
2018-02-13 9:52 ` Alex Kiernan
2018-02-11 12:06 ` [U-Boot] [PATCH 5/8] Convert CONFIG_BOOTCOUNT_RAM " Alex Kiernan
2018-02-11 19:04 ` Lukasz Majewski
2018-02-11 12:06 ` [U-Boot] [PATCH 6/8] Convert CONFIG_BOOTCOUNT_I2C " Alex Kiernan
2018-02-11 19:05 ` Lukasz Majewski
2018-02-11 12:06 ` [U-Boot] [PATCH 7/8] Integrate AT91 bootcount driver Alex Kiernan
2018-02-11 19:05 ` Lukasz Majewski
2018-02-11 12:06 ` [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig Alex Kiernan
2018-02-11 19:36 ` Lukasz Majewski
2018-02-11 21:04 ` Alex Kiernan
2018-02-11 21:44 ` Lukasz Majewski
2018-02-12 5:55 ` Alex Kiernan
2018-02-12 8:48 ` Lukasz Majewski
2018-02-12 10:27 ` Lukasz Majewski
2018-02-13 9:51 ` Alex Kiernan
2018-02-13 14:41 ` Lukasz Majewski
2018-02-14 6:23 ` Alex Kiernan
2018-02-14 8:53 ` Lukasz Majewski
2018-02-14 16:34 ` Alex Kiernan
2018-02-14 19:13 ` Lukasz Majewski
2018-02-15 14:04 ` Alex Kiernan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180211200917.68813797@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox