[U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig

[Lukasz Majewski <lukma@denx.de>]

Hi Alex,

> Make generate boot counter selected in the same way as other boot
> count drivers
> 
> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
> ---
> 
>  drivers/bootcount/Kconfig  | 11 +++++++++++
>  drivers/bootcount/Makefile |  2 +-
>  2 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
> index e0d1fc2..9fde2f2 100644
> --- a/drivers/bootcount/Kconfig
> +++ b/drivers/bootcount/Kconfig
> @@ -14,6 +14,16 @@ choice
>  	prompt "Boot count device"
>  	default BOOTCOUNT_AM33XX if AM33XX || SOC_DA8XX
>  	default BOOTCOUNT_AT91 if AT91SAM9XE
> +	default BOOTCOUNT_GENERIC
> +
> +config BOOTCOUNT_GENERIC
> +	bool "Generic default boot counter"
> +	help
> +	  Generic bootcount stored at SYS_BOOTCOUNT_ADDR.
> +
> +	  SYS_BOOTCOUNT_ADDR:
> +	    Set to the address where the bootcount and bootcount
> magic
> +	    will be stored.
>  
>  config BOOTCOUNT_EXT
>  	bool "Boot counter on EXT filesystem"
> @@ -64,6 +74,7 @@ endchoice
>  
>  config SYS_BOOTCOUNT_SINGLEWORD
>  	bool "Use single word to pack boot count and magic value"
> +	depends on BOOTCOUNT_GENERIC
>  	help
>  	  This option enables packing boot count magic value and
> boot count into single word (32 bits).
> diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
> index a3658c1..3e1ae8c 100644
> --- a/drivers/bootcount/Makefile
> +++ b/drivers/bootcount/Makefile
> @@ -2,7 +2,7 @@
>  # SPDX-License-Identifier:	GPL-2.0+
>  #
>  
> -obj-y				+= bootcount.o
> +obj-$(CONFIG_BOOTCOUNT_GENERIC)	+= bootcount.o
>  obj-$(CONFIG_BOOTCOUNT_AT91)	+= bootcount_at91.o
>  obj-$(CONFIG_BOOTCOUNT_AM33XX)	+= bootcount_davinci.o
>  obj-$(CONFIG_BOOTCOUNT_RAM)	+= bootcount_ram.o

Reviewed-by: Lukasz Majewski <lukma@denx.de>


I had to put attached patch (one liner) to make it working on my setup
(this allows re-using the SYS_BOOTCOUNT_ADDR on non EXT setup).

Could you squash this patch to your work and send v2?

Thanks in advance,

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-bootcount-Kconfig-Enable-CONFIG_SYS_BOOTCOUNT_ADDR-t.patch
Type: text/x-patch
Size: 906 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180211/eae34b25/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180211/eae34b25/attachment.sig>