From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Sun, 11 Feb 2018 20:36:46 +0100 Subject: [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig In-Reply-To: <1518350813-3418-9-git-send-email-alex.kiernan@gmail.com> References: <1518350813-3418-1-git-send-email-alex.kiernan@gmail.com> <1518350813-3418-9-git-send-email-alex.kiernan@gmail.com> Message-ID: <20180211203646.24102b36@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Alex, > Make generate boot counter selected in the same way as other boot > count drivers > > Signed-off-by: Alex Kiernan > --- > > drivers/bootcount/Kconfig | 11 +++++++++++ > drivers/bootcount/Makefile | 2 +- > 2 files changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig > index e0d1fc2..9fde2f2 100644 > --- a/drivers/bootcount/Kconfig > +++ b/drivers/bootcount/Kconfig > @@ -14,6 +14,16 @@ choice > prompt "Boot count device" > default BOOTCOUNT_AM33XX if AM33XX || SOC_DA8XX > default BOOTCOUNT_AT91 if AT91SAM9XE > + default BOOTCOUNT_GENERIC > + > +config BOOTCOUNT_GENERIC > + bool "Generic default boot counter" > + help > + Generic bootcount stored at SYS_BOOTCOUNT_ADDR. > + > + SYS_BOOTCOUNT_ADDR: > + Set to the address where the bootcount and bootcount > magic > + will be stored. > > config BOOTCOUNT_EXT > bool "Boot counter on EXT filesystem" > @@ -64,6 +74,7 @@ endchoice > > config SYS_BOOTCOUNT_SINGLEWORD > bool "Use single word to pack boot count and magic value" > + depends on BOOTCOUNT_GENERIC > help > This option enables packing boot count magic value and > boot count into single word (32 bits). > diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile > index a3658c1..3e1ae8c 100644 > --- a/drivers/bootcount/Makefile > +++ b/drivers/bootcount/Makefile > @@ -2,7 +2,7 @@ > # SPDX-License-Identifier: GPL-2.0+ > # > > -obj-y += bootcount.o > +obj-$(CONFIG_BOOTCOUNT_GENERIC) += bootcount.o > obj-$(CONFIG_BOOTCOUNT_AT91) += bootcount_at91.o > obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o > obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o Reviewed-by: Lukasz Majewski I had to put attached patch (one liner) to make it working on my setup (this allows re-using the SYS_BOOTCOUNT_ADDR on non EXT setup). Could you squash this patch to your work and send v2? Thanks in advance, Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-bootcount-Kconfig-Enable-CONFIG_SYS_BOOTCOUNT_ADDR-t.patch Type: text/x-patch Size: 906 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: