[U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig

[Lukasz Majewski <lukma@denx.de>]

Hi Alex,

>  - Bootcount:
> -		CONFIG_BOOTCOUNT_ENV
> -		If no softreset save registers are found on the
> hardware
> -		"bootcount" is stored in the environment. To prevent
> a
> -		saveenv on all reboots, the environment variable
> -		"upgrade_available" is used. If "upgrade_available"
> is
> -		0, "bootcount" is always 0, if "upgrade_available" is
> -		1 "bootcount" is incremented in the environment.
> -		So the Userspace Applikation must set the
> "upgrade_available"
> -		and "bootcount" variable to 0, if a boot was
> successfully. -
> -- Pre-Boot Commands:
	^^^^^^^^^^^ - This line shall be keep. The "- Bootcount:" Above
	shall be deleted instead. 

>  		CONFIG_PREBOOT



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180213/d2029c36/attachment.sig>