From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Tue, 13 Feb 2018 10:30:07 +0100 Subject: [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig In-Reply-To: <1518350813-3418-5-git-send-email-alex.kiernan@gmail.com> References: <1518350813-3418-1-git-send-email-alex.kiernan@gmail.com> <1518350813-3418-5-git-send-email-alex.kiernan@gmail.com> Message-ID: <20180213103007.6caba35b@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Alex, > - Bootcount: > - CONFIG_BOOTCOUNT_ENV > - If no softreset save registers are found on the > hardware > - "bootcount" is stored in the environment. To prevent > a > - saveenv on all reboots, the environment variable > - "upgrade_available" is used. If "upgrade_available" > is > - 0, "bootcount" is always 0, if "upgrade_available" is > - 1 "bootcount" is incremented in the environment. > - So the Userspace Applikation must set the > "upgrade_available" > - and "bootcount" variable to 0, if a boot was > successfully. - > -- Pre-Boot Commands: ^^^^^^^^^^^ - This line shall be keep. The "- Bootcount:" Above shall be deleted instead. > CONFIG_PREBOOT Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: