From: Jagan Teki <jagannadh.teki@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] imx6q: engicam: Use SPL_LOAD_FIT for MMC boards
Date: Tue, 20 Feb 2018 12:46:28 +0530 [thread overview]
Message-ID: <20180220071628.4130-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180220071628.4130-1-jagan@amarulasolutions.com>
Currently SPL_LOAD_FIT is unable to boot from nand on
i.MX6QDL platform, so enable only for MMC boards.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-imx/mx6/Kconfig | 1 -
board/engicam/imx6q/MAINTAINERS | 3 ++-
configs/imx6dl_icore_nand_defconfig | 47 ++++++++++++++++++++++++++++++++++++
configs/imx6q_icore_nand_defconfig | 47 ++++++++++++++++++++++++++++++++++++
configs/imx6qdl_icore_mipi_defconfig | 1 +
configs/imx6qdl_icore_mmc_defconfig | 1 +
configs/imx6qdl_icore_rqs_defconfig | 1 +
7 files changed, 99 insertions(+), 2 deletions(-)
create mode 100644 configs/imx6dl_icore_nand_defconfig
create mode 100644 configs/imx6q_icore_nand_defconfig
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 2f3e52d624..d4ce38db8d 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -238,7 +238,6 @@ config TARGET_MX6Q_ENGICAM
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
- select SPL_LOAD_FIT
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
select SPL_SEPARATE_BSS if SPL
diff --git a/board/engicam/imx6q/MAINTAINERS b/board/engicam/imx6q/MAINTAINERS
index 82efb462c0..77ae6cb387 100644
--- a/board/engicam/imx6q/MAINTAINERS
+++ b/board/engicam/imx6q/MAINTAINERS
@@ -4,7 +4,8 @@ S: Maintained
F: board/engicam/imx6q
F: include/configs/imx6-engicam.h
F: configs/imx6qdl_icore_mmc_defconfig
-F: configs/imx6qdl_icore_nand_defconfig
+F: configs/imx6q_icore_nand_defconfig
+F: configs/imx6dl_icore_nand_defconfig
F: configs/imx6qdl_icore_rqs_defconfig
F: arch/arm/dts/imx6qdl-icore.dtsi
F: arch/arm/dts/imx6q-icore.dts
diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig
new file mode 100644
index 0000000000..d17f9cfed9
--- /dev/null
+++ b/configs/imx6dl_icore_nand_defconfig
@@ -0,0 +1,47 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+# CONFIG_CMD_BMODE is not set
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_SPL=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="icorem6qdl> "
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)"
+CONFIG_CMD_UBI=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_NAND=y
+CONFIG_NAND_MXS=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_SMSC=y
+CONFIG_FEC_MXC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_MXC_UART=y
+CONFIG_IMX_THERMAL=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig
new file mode 100644
index 0000000000..034e17479e
--- /dev/null
+++ b/configs/imx6q_icore_nand_defconfig
@@ -0,0 +1,47 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+# CONFIG_CMD_BMODE is not set
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_SPL=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="icorem6qdl> "
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)"
+CONFIG_CMD_UBI=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_NAND=y
+CONFIG_NAND_MXS=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_SMSC=y
+CONFIG_FEC_MXC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_MXC_UART=y
+CONFIG_IMX_THERMAL=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig
index 7cb5076589..e212cd1c18 100644
--- a/configs/imx6qdl_icore_mipi_defconfig
+++ b/configs/imx6qdl_icore_mipi_defconfig
@@ -18,6 +18,7 @@ CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
+CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="icorem6qdl-mipi> "
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 7cfad903bc..1a0ee83633 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -18,6 +18,7 @@ CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
+CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="icorem6qdl> "
diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index 664dffbf69..98ba9345d5 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -17,6 +17,7 @@ CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
+CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
--
2.14.2
prev parent reply other threads:[~2018-02-20 7:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-20 7:16 [U-Boot] [PATCH 1/3] imx6ul: engicam: Drop isiot-mmc defconfig Jagan Teki
2018-02-20 7:16 ` [U-Boot] [PATCH 2/3] imx6: engicam: Drop SPL_EXT_SUPPORT Jagan Teki
2018-02-22 13:38 ` Stefano Babic
2018-02-22 13:50 ` Jagan Teki
2018-02-20 7:16 ` Jagan Teki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180220071628.4130-3-jagan@amarulasolutions.com \
--to=jagannadh.teki@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox