public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Peng Fan <van.freenix@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Date: Fri, 23 Feb 2018 14:02:27 +0800	[thread overview]
Message-ID: <20180223060227.GA325@shlinux2> (raw)
In-Reply-To: <CAOMZO5CjrZvskbYPnzTXaYqto_CTH7zo=+NJAP_OqXZKGJ2T2w@mail.gmail.com>

Hi Fabio,
On Thu, Feb 22, 2018 at 01:40:47PM -0300, Fabio Estevam wrote:
>Hi Peng,
>
>On Sun, Feb 4, 2018 at 7:42 AM, Stefano Babic <sbabic@denx.de> wrote:
>
>> I have merged most of the series, Patch 2 up to patch 30, leaving out
>> just the last one for the EVK. Building mx8evk is fine, I have just
>> noted a couple of checkpatch warnings in mx8mq_evk.h
>> (CONFIG_EXTRA_SETTINGS, line too long). You could fix as well in next
>> post. The rest of patches is fine and will part of my next PR.
>
>Do you plan to post a new version for the patch that adds the mx8mq evk support?

I was a bit busy on other things. Regarding the board support, I still
do not have a good idea about the DDR things. I am thinking moving
the ddr code out into a dedicated bin file and pad to the end of SPL.

What do you think?

Thanks,
Peng.

>
>Thanks
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>https://lists.denx.de/listinfo/u-boot

-- 

  reply	other threads:[~2018-02-23  6:02 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-10  5:20 [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 01/31] arm: imx: Rework i.MX specific commands to be excluded from SPL Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 02/31] imx: add i.MX8M into Kconfig Peng Fan
2018-01-21 15:53   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 03/31] imx: mx8m: add register definition header file Peng Fan
2018-01-21 15:54   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 04/31] imx: mx8m: add pin " Peng Fan
2018-01-21 15:53   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 05/31] imx: mx8m: add clock driver Peng Fan
2018-01-21 16:28   ` Stefano Babic
2018-01-23  8:58     ` Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 06/31] imx: add sip function Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 07/31] imx: boot_mode: add USB_BOOT entry Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 08/31] imx: cpu: update cpu file to support i.MX8M Peng Fan
2018-01-21 16:28   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 09/31] imx: spl: implement spl_boot_device for i.MX8M Peng Fan
2018-01-21 16:29   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 10/31] imx: add i.MX8MQ SoC Revision and is_mx8m helper Peng Fan
2018-01-21 16:30   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 11/31] imx: add pad settings bit definition for i.MX8M Peng Fan
2018-01-21 16:30   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 12/31] imx: cpu: move speed/temp to common cpu Peng Fan
2018-01-21 16:30   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 13/31] imx: cpu: add cpu speed/grade for i.MX8M Peng Fan
2018-01-21 16:31   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 14/31] imx: refactor imx_get_mac_from_fuse Peng Fan
2018-01-21 16:31   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 15/31] imx: cleanup bootaux Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 16/31] imx: bootaux: support i.MX8M Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 17/31] imx: mx7: move get_boot_device to cpu.c Peng Fan
2018-01-21 16:33   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 18/31] imx: cpu: support get_boot_device for i.MX8M Peng Fan
2018-01-21 16:33   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 19/31] imx: mx7: move mmc env code to mmc_env.c Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 20/31] imx: mx8m: add soc related settings and files Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 21/31] imx: makefile: compile files for i.MX8M Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 22/31] misc: ocotp: add i.MX8M support Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 23/31] mmc: fsl_esdhc: support i.MX8M Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 24/31] imx: lcdif: include i.MX8M Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 25/31] gpio: mxc: add i.MX8M support Peng Fan
2018-01-21 16:33   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 26/31] net: fec: do not access reserved register for i.MX8M Peng Fan
2018-01-21 16:34   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 27/31] net: fec: fix build warnings for 64bits support Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 28/31] imx: imx8mq: add dtsi file Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 29/31] power: pmic/regulator allow dm be omitted by SPL Peng Fan
2018-01-17 12:16   ` Jaehoon Chung
2018-01-10  5:20 ` [U-Boot] [PATCH V5 30/31] imx: mx8m: add ddr controller memory map Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support Peng Fan
2018-01-22 14:00   ` Stefano Babic
2018-01-22 15:23     ` Fabio Estevam
2018-01-22 16:20       ` Stefano Babic
2018-01-31 10:25         ` Fabio Estevam
2018-01-31 10:30           ` Stefano Babic
2018-02-04  9:42             ` Stefano Babic
2018-02-22 16:40               ` Fabio Estevam
2018-02-23  6:02                 ` Peng Fan [this message]
2018-02-23 13:37                   ` Fabio Estevam
2018-03-20 19:46                   ` Fabio Estevam
2018-03-21  9:07                     ` Peng Fan
2018-02-23  9:46                 ` Stefano Babic
2018-02-23 13:21                   ` Fabio Estevam
2018-01-23  2:24     ` Peng Fan
2018-01-23  9:52       ` Stefano Babic
     [not found]   ` <88fee187-cf7f-cd2a-659a-eb67ba814178@denx.de>
2018-01-23  1:54     ` Peng Fan
2018-01-23 10:02       ` Stefano Babic
2018-06-20  8:57   ` Paul Kocialkowski
2018-06-20 11:37     ` Andre Przywara
2018-06-20 11:54       ` Paul Kocialkowski
2018-06-20 12:08         ` Paul Kocialkowski
2018-06-20 11:56     ` Peng Fan
2018-06-20 15:24       ` Paul Kocialkowski
2018-06-20 16:12         ` Andre Przywara
2018-06-20 17:16           ` Paul Kocialkowski
2018-06-21  1:07             ` André Przywara
2018-06-21 18:29               ` Todd Weaver
2018-06-21  7:08           ` Wolfgang Denk
2018-01-10 13:08 ` [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK Diego Dorta
2018-01-11  1:16   ` Peng Fan
2018-01-11 12:36     ` Diego Dorta
2018-01-13 10:55       ` Peng Fan
2018-01-16 12:15         ` Diego Dorta
2018-01-16 12:25           ` Peng Fan
2018-01-17 14:59             ` Diego Dorta
2018-01-18  1:13               ` Peng Fan
2018-01-18 14:58                 ` Diego Dorta
2018-01-18  1:24 ` Peng Fan
2018-01-18  8:50   ` Stefano Babic
2018-01-18  8:58     ` Peng Fan
2018-01-22 13:04 ` Diego Dorta
2018-08-31  6:27   ` Jon Nettleton
2018-09-06 13:37     ` Fabio Estevam
2018-09-07  6:03       ` Jon Nettleton
2018-09-07  6:09         ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180223060227.GA325@shlinux2 \
    --to=van.freenix@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox