public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/2] am335x_boneblack: Enable fastboot flash support
Date: Tue, 27 Feb 2018 22:56:27 +0100	[thread overview]
Message-ID: <20180227225627.65b34c2f@jawa> (raw)
In-Reply-To: <20180227214504.32572-1-semen.protsenko@linaro.org>

Hi Sam,

> Standard and recommended way to upgrade the firmware is DFU. But DFU
> has extremely low transmission speed (around 150 KiB/sec), thus it's
> a bad fit for flashing big images (like rootfs). Low DFU speed is
> mostly due to next reasons (kudos to Ruslan Bilovol for
> investigation): 1. DFU works only via EP0, per DFU specification [1].
> But AM335x doesn't have DMA for EP0, according to AM335x TRM [2]: from
>     section 16.2:
> 
>       "The CPPI DMA can be used to service Endpoints 1 to 15 not
>        Endpoint 0. CPU access method is used to service Endpoint 0
>        transactions."
> 
>  2. Max transmission packet size via EP0 is 64 bytes, whereas for
> other endpoints max transmission packet size is 512 bytes

DFU was (and still is) supposed to work on all devices - even those
with very tiny resources (like st microcontrollers).

According to USB spec, EP0 is mandatory, so that is the reason for
using it as a common denominator.

Just for the record - fastboot is one of the options here. 

For BBB you may want to look at "dfu tftp" - which uses ETH's tftp
protocol with dfu backend. It is supposed to be a remedy for problem
described above.

More information at:
./doc/README.dfutftp


Of course I also don't mind using fastboot - it depends on your use
case.

> 
> fastboot specification [3], on the other hand, says nothing about
> which EP should be used (and I see that EP1 is used on BBB board). So
> let's enable fastboot flash support on BeagleBone Black board to
> provide a better way to flash big images via USB.
> 
> [1] www.usb.org/developers/docs/devclass_docs/DFU_1.1.pdf
> [2] www.ti.com/lit/ug/spruh73p/spruh73p.pdf
> [3]
> https://android.googlesource.com/platform/system/core/+/master/fastboot/README.md
> 
> Sam Protsenko (2):
>   omap: Fix AM335x build with enabled fastboot flash
>   configs: am335x_boneblack: Enable fastboot flash capability
> 
>  arch/arm/mach-omap2/utils.c        | 2 ++
>  configs/am335x_boneblack_defconfig | 2 ++
>  2 files changed, 4 insertions(+)
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180227/f5c573c9/attachment.sig>

  parent reply	other threads:[~2018-02-27 21:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-27 21:45 [U-Boot] [PATCH 0/2] am335x_boneblack: Enable fastboot flash support Sam Protsenko
2018-02-27 21:45 ` [U-Boot] [PATCH 1/2] omap: Fix AM335x build with enabled fastboot flash Sam Protsenko
2018-02-27 21:56   ` Lukasz Majewski
2018-02-27 21:58   ` Tom Rini
2018-03-14 14:10   ` [U-Boot] [U-Boot, " Tom Rini
2018-02-27 21:45 ` [U-Boot] [PATCH 2/2] configs: am335x_boneblack: Enable fastboot flash capability Sam Protsenko
2018-02-27 21:57   ` Lukasz Majewski
2018-02-27 21:58   ` Tom Rini
2018-03-14 14:10   ` [U-Boot] [U-Boot, " Tom Rini
2018-02-27 21:56 ` Lukasz Majewski [this message]
2018-02-27 23:38   ` [U-Boot] [PATCH 0/2] am335x_boneblack: Enable fastboot flash support Sam Protsenko
2018-02-27 23:54     ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180227225627.65b34c2f@jawa \
    --to=lukma@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox