[U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path

[Lukasz Majewski <lukma@denx.de>]

Hi Ruslan,

> Remove busy looping during watchdog reset.
> Each polling of W_PEND_WTGR bit ("finish posted
> write") after watchdog reset takes 120-140us
> on BeagleBone Black board. Current U-Boot code
> has watchdog resets in random places and often
> there is situation when watchdog is reset
> few times in a row in nested functions.
> This adds extra delays and slows the whole system.
> 
> Instead of polling W_PEND_WTGR bit, we skip
> watchdog reset if the bit is set. Anyway, watchdog
> is in the middle of reset *right now*, so we can
> just return.

It seems like similar problem may be in the Linux kernel driver:
v4.16-rc1/source/drivers/watchdog/omap_wdt.c#L74

Linux driver also waits for the write.

> 
> This noticeably increases performance of the
> system. Below are some measurements on BBB:
>  - DFU upload over USB                 15% faster
>  - fastboot image upload               3x times faster
>  - USB ep0 transfers with 4k packets   20% faster
> 
> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
> ---
>  drivers/watchdog/omap_wdt.c | 21 +++++++++++++++------
>  1 file changed, 15 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
> index 7b1f429..d724c96 100644
> --- a/drivers/watchdog/omap_wdt.c
> +++ b/drivers/watchdog/omap_wdt.c
> @@ -53,16 +53,25 @@ void hw_watchdog_reset(void)
>  {
>  	struct wd_timer *wdt = (struct wd_timer *)WDT_BASE;
>  
> -	/* wait for posted write to complete */
> -	while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WTGR)
> -		;
> +	/*
> +	 * Somebody just triggered watchdog reset and write to WTGR
> register
> +	 * is in progress. It is resetting right now, no need to
> trigger it
> +	 * again
> +	 */
> +	if ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WTGR)
> +		return;
>  
>  	wdt_trgr_pattern = ~wdt_trgr_pattern;
>  	writel(wdt_trgr_pattern, &wdt->wdtwtgr);
>  
> -	/* wait for posted write to complete */
> -	while ((readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WTGR))
> -		;
> +	/*
> +	 * Don't wait for posted write to complete, i.e. don't check
> +	 * WDT_WWPS_PEND_WTGR bit in WWPS register. There is no
> writes to
> +	 * WTGR register outside of this func, and if entering it
> +	 * we see WDT_WWPS_PEND_WTGR bit set, it means watchdog reset
> +	 * was just triggered. This prevents us from wasting time in
> busy
> +	 * polling of WDT_WWPS_PEND_WTGR bit.
> +	 */
>  }
>  
>  static int omap_wdt_set_timeout(unsigned int timeout)




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180301/d515b771/attachment.sig>