From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Date: Fri, 2 Mar 2018 16:58:50 +0100 Subject: [U-Boot] [PATCH v3 13/20] Revert: arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0 In-Reply-To: <20180302005659.28728-14-andre.przywara@arm.com> References: <20180302005659.28728-1-andre.przywara@arm.com> <20180302005659.28728-14-andre.przywara@arm.com> Message-ID: <20180302155850.nhkjhzontzvvlavz@flea.lan> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Mar 02, 2018 at 12:56:52AM +0000, Andre Przywara wrote: > Linux kernels before 4.12-rc1 don't know about the AXP803 PMIC, so can't > enable the MMC driver with the current DT anymore, because that now > depends on this regulator. Given that only I2C, USB and MMC were supported at the time, is it really worth it? There's a lot of incentive to move to a newer kernel given the minimal support it had at the time. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: