From: Daniel Vetter <daniel@ffwll.ch>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board
Date: Tue, 13 Mar 2018 16:23:10 +0100 [thread overview]
Message-ID: <20180313152310.GJ4788@phenom.ffwll.local> (raw)
In-Reply-To: <1520949014-21468-1-git-send-email-yannick.fertre@st.com>
On Tue, Mar 13, 2018 at 02:49:59PM +0100, yannick fertre wrote:
> Version 3:
> - Replace some pr_error, pr_warn or pr_info by dev_error, dev_warn & dev_info.
> - Refresh stm32f769-disco_defconfig with last modification done on v2018.3-rc4.
> - rework include files ordering.
>
> Version 2:
> - Replace debug log by pr_error, pr_warn or pr_info.
> - Rework bridge between ltdc & dsi panel
> - Rework backligh management (with or witout gpio)
> - Rework panel otm8009a
> - Add new panel raydium rm68200
>
> Version 1:
> - Initial commit
>
> This serie contains all patchsets needed for displaying a splash screen
> on the stm32f769 disco board.
> A new config has been created configs/stm32f769-disco_defconfig.
> This is necessary due to the difference of panels between stm32f769-disco &
> stm32f746-disco boards.
Shouldn't we patch the drivers/gpu/drm/stm driver instead of the
drivers/video one? fbdev is kinda a dead end and not for adding new hw
support ...
-Daniel
> This serie depends on:
> http://patchwork.ozlabs.org/patch/870938/
> http://patchwork.ozlabs.org/cover/880576/
> yannick fertre (10):
> video: stm32: stm32_ltdc: add bridge to display controller
> video: stm32: stm32_ltdc: update debug log
> video: add support of MIPI DSI interface
> video: add support of panel OTM8009A
> video: add MIPI DSI host controller bridge
> video: add support of STM32 MIPI DSI controller driver
> video: add support of panel rm68200
> arm: dts: stm32: add dsi for STM32F746
> arm: dts: stm32: add display for STM32F769 disco board
> board: Add STM32F769 SoC, discovery board support
>
> arch/arm/dts/stm32f746.dtsi | 12 +
> arch/arm/dts/stm32f769-disco.dts | 71 ++++
> configs/stm32f769-disco_defconfig | 65 +++
> drivers/video/Kconfig | 32 ++
> drivers/video/Makefile | 4 +
> drivers/video/dw_mipi_dsi.c | 822 +++++++++++++++++++++++++++++++++++++
> drivers/video/mipi_display.c | 807 ++++++++++++++++++++++++++++++++++++
> drivers/video/orisetech_otm8009a.c | 327 +++++++++++++++
> drivers/video/raydium-rm68200.c | 326 +++++++++++++++
> drivers/video/stm32/Kconfig | 10 +
> drivers/video/stm32/Makefile | 1 +
> drivers/video/stm32/stm32_dsi.c | 426 +++++++++++++++++++
> drivers/video/stm32/stm32_ltdc.c | 144 ++++---
> include/dw_mipi_dsi.h | 34 ++
> include/mipi_display.h | 257 +++++++++++-
> 15 files changed, 3279 insertions(+), 59 deletions(-)
> create mode 100644 configs/stm32f769-disco_defconfig
> create mode 100644 drivers/video/dw_mipi_dsi.c
> create mode 100644 drivers/video/mipi_display.c
> create mode 100644 drivers/video/orisetech_otm8009a.c
> create mode 100644 drivers/video/raydium-rm68200.c
> create mode 100644 drivers/video/stm32/stm32_dsi.c
> create mode 100644 include/dw_mipi_dsi.h
>
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
next prev parent reply other threads:[~2018-03-13 15:23 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-13 13:49 [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 01/10] video: stm32: stm32_ltdc: add bridge to display controller yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 01/10] video: stm32: stm32_ltdc: update debug log yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 02/10] video: add support of MIPI DSI interface yannick fertre
2018-03-13 15:30 ` Simon Glass
2018-03-13 13:50 ` [U-Boot] [PATCH v3 02/10] video: stm32: stm32_ltdc: update debug log yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 03/10] video: add support of MIPI DSI interface yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 03/10] video: add support of panel OTM8009A yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 04/10] otm yannick fertre
2018-03-13 14:12 ` Patrice CHOTARD
2018-03-13 14:36 ` Yannick FERTRE
2018-03-13 13:50 ` [U-Boot] [PATCH v3 04/10] video: add support of panel OTM8009A yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 05/10] video: add MIPI DSI host controller bridge yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 06/10] video: add support of STM32 MIPI DSI controller driver yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 07/10] video: add support of panel rm68200 yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 08/10] arm: dts: stm32: add dsi for STM32F746 yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 09/10] arm: dts: stm32: add display for STM32F769 disco board yannick fertre
2018-03-13 13:50 ` [U-Boot] [PATCH v3 10/10] board: Add STM32F769 SoC, discovery board support yannick fertre
2018-03-13 14:10 ` Patrice CHOTARD
2018-03-13 15:23 ` Daniel Vetter [this message]
2018-03-13 20:50 ` [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board Anatolij Gustschin
2018-03-13 21:00 ` Brian Norris
2018-03-13 22:50 ` Thierry Reding
-- strict thread matches above, loose matches on Subject: below --
2018-08-17 14:38 Yannick Fertré
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180313152310.GJ4788@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox