From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry
Date: Wed, 14 Mar 2018 18:29:45 +0530 [thread overview]
Message-ID: <20180314125954.8718-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180314125954.8718-1-jagan@amarulasolutions.com>
Add simple and meaningful kconfig option for p2wi.c
instead of using MACH type on Makefile.
p2wi is an I2C controller, so used the same on kconfig
definition.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 12 ++++++++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index f336c208e4..b9b7340af9 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,17 @@ config SPL_LDSCRIPT
config IDENT_STRING
default " Allwinner Technology"
+config I2C_SUN6I_P2WI
+ bool "Allwinner sun6i internal P2WI controller"
+ help
+ If you say yes to this option, support will be included for the
+ P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi
+ SOCs.
+ The P2WI looks like an SMBus controller (which supports only byte
+ accesses), except that it only supports one slave device.
+ This interface is used to connect to specific PMIC devices (like the
+ AXP221).
+
config MFD_SUN6I_PRCM
bool
help
@@ -93,6 +104,7 @@ config MACH_SUN6I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select I2C_SUN6I_P2WI
select MFD_SUN6I_PRCM
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index d45b015964..0dd85b41cb 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -16,10 +16,10 @@ obj-y += pinmux.o
ifndef CONFIG_MACH_SUN9I
obj-y += usb_phy.o
endif
+obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
obj-$(CONFIG_MACH_SUN9I) += prcm.o
-obj-$(CONFIG_MACH_SUN6I) += p2wi.o
obj-$(CONFIG_MACH_SUN8I) += rsb.o
obj-$(CONFIG_MACH_SUN9I) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
--
2.14.3
next prev parent reply other threads:[~2018-03-14 12:59 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 12:59 [U-Boot] [PATCH v3 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
2018-03-14 12:59 ` [U-Boot] [PATCH v3 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry Jagan Teki
2018-03-14 13:23 ` Maxime Ripard
2018-03-14 12:59 ` Jagan Teki [this message]
2018-03-14 13:22 ` [U-Boot] [PATCH v3 02/11] sunxi: Add I2C_SUN6I_P2WI " Maxime Ripard
2018-03-14 13:44 ` Jagan Teki
2018-03-16 6:49 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 03/11] sunxi: Use MFD_SUN6I_PRCM if used Jagan Teki
2018-03-14 13:24 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 04/11] sunxi: Add SUN8I_RSB kconfig entry Jagan Teki
2018-03-14 13:24 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 05/11] sunxi: Add PMIC_AXP " Jagan Teki
2018-03-14 13:26 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 06/11] sunxi: add DRAM_SUN6I kconfig Jagan Teki
2018-03-14 13:26 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 07/11] sunxi: Add DRAM_SUN4I kconfig entry Jagan Teki
2018-03-14 13:26 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 08/11] sunxi: Add DRAM_SUN9I " Jagan Teki
2018-03-14 13:26 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 09/11] sunxi: Add DRAM_SUN8I_A23 " Jagan Teki
2018-03-14 13:27 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 10/11] sunxi: Add DRAM_SUN8I_A33 " Jagan Teki
2018-03-14 13:27 ` Maxime Ripard
2018-03-14 12:59 ` [U-Boot] [PATCH v3 11/11] sunxi: Add DRAM_SUN8I_A83T " Jagan Teki
2018-03-14 13:27 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180314125954.8718-3-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox