From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/6] ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi
Date: Sun, 25 Mar 2018 23:52:43 +0530 [thread overview]
Message-ID: <20180325182245.16177-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180325182245.16177-1-jagan@amarulasolutions.com>
Move usdhc2 node along with pinctrl to imx6ul-isiot.dts
from imx6ul-isiot-emmc.dts
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/imx6ul-isiot-emmc.dts | 24 ------------------------
arch/arm/dts/imx6ul-isiot.dtsi | 26 ++++++++++++++++++++++++++
2 files changed, 26 insertions(+), 24 deletions(-)
diff --git a/arch/arm/dts/imx6ul-isiot-emmc.dts b/arch/arm/dts/imx6ul-isiot-emmc.dts
index a611e3bba5..588bebac47 100644
--- a/arch/arm/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/dts/imx6ul-isiot-emmc.dts
@@ -51,29 +51,5 @@
&usdhc2 {
u-boot,dm-spl;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
- bus-width = <8>;
- no-1-8-v;
status = "okay";
};
-
-&iomuxc {
- pinctrl_usdhc2: usdhc2grp {
- u-boot,dm-spl;
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
- MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
- MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
- MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
- MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
- MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
- >;
- };
-};
diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi
index 5007a88f45..e645c1265f 100644
--- a/arch/arm/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/dts/imx6ul-isiot.dtsi
@@ -91,6 +91,15 @@
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ bus-width = <8>;
+ no-1-8-v;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
@@ -139,4 +148,21 @@
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
>;
};
+
+ pinctrl_usdhc2: usdhc2grp {
+ u-boot,dm-spl;
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
+ >;
+ };
};
--
2.14.3
next prev parent reply other threads:[~2018-03-25 18:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-25 18:22 [U-Boot] [PATCH v2 0/6] ARM: i.MX6: Add proper CONFIG names Jagan Teki
2018-03-25 18:22 ` [U-Boot] [PATCH v2 1/6] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures Jagan Teki
2018-03-25 18:22 ` [U-Boot] [PATCH v2 2/6] i.MX6: Change SYS_SOC from mx6 to imx6 Jagan Teki
2018-03-25 18:30 ` Fabio Estevam
2018-03-26 7:13 ` Lothar Waßmann
2018-03-25 18:22 ` [U-Boot] [PATCH v2 3/6] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl Jagan Teki
2018-03-25 18:22 ` Jagan Teki [this message]
2018-03-25 18:22 ` [U-Boot] [PATCH v2 5/6] ARM: dts: i.MX6UL: " Jagan Teki
2018-03-25 18:22 ` [U-Boot] [PATCH v2 6/6] ARM: i.MX6: dts: Build dtb based on SOC type Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180325182245.16177-5-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox