* [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board
@ 2018-03-14 10:07 Lukasz Majewski
2018-03-14 10:07 ` [U-Boot] [PATCH v1 2/2] boot: script: The boot.scr file for K+P's boards Lukasz Majewski
2018-03-29 16:10 ` [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Stefano Babic
0 siblings, 2 replies; 5+ messages in thread
From: Lukasz Majewski @ 2018-03-14 10:07 UTC (permalink / raw)
To: u-boot
This commit provides support for Kieback & Peter GmbH IMX6Q based
TPC board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
arch/arm/mach-imx/mx6/Kconfig | 11 ++
board/k+p/kp_imx6q_tpc/Kconfig | 12 ++
board/k+p/kp_imx6q_tpc/MAINTAINERS | 6 +
board/k+p/kp_imx6q_tpc/Makefile | 11 ++
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 302 ++++++++++++++++++++++++++++++
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 283 ++++++++++++++++++++++++++++
configs/kp_imx6q_tpc_defconfig | 42 +++++
include/configs/kp_imx6q_tpc.h | 128 +++++++++++++
8 files changed, 795 insertions(+)
create mode 100644 board/k+p/kp_imx6q_tpc/Kconfig
create mode 100644 board/k+p/kp_imx6q_tpc/MAINTAINERS
create mode 100644 board/k+p/kp_imx6q_tpc/Makefile
create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
create mode 100644 configs/kp_imx6q_tpc_defconfig
create mode 100644 include/configs/kp_imx6q_tpc.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index d4ce38db8d..aa6f5facbf 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -387,6 +387,16 @@ config TARGET_TBS2910
config TARGET_TITANIUM
bool "titanium"
+config TARGET_KP_IMX6Q_TPC
+ bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
+ select MX6QDL
+ select BOARD_LATE_INIT
+ select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
+ select DM
+ select DM_THERMAL
+ imply CMD_SPL
+
config TARGET_TQMA6
bool "TQ Systems TQMa6 board"
select BOARD_LATE_INIT
@@ -493,6 +503,7 @@ source "board/tbs/tbs2910/Kconfig"
source "board/tqc/tqma6/Kconfig"
source "board/toradex/apalis_imx6/Kconfig"
source "board/toradex/colibri_imx6/Kconfig"
+source "board/k+p/kp_imx6q_tpc/Kconfig"
source "board/udoo/Kconfig"
source "board/udoo/neo/Kconfig"
source "board/wandboard/Kconfig"
diff --git a/board/k+p/kp_imx6q_tpc/Kconfig b/board/k+p/kp_imx6q_tpc/Kconfig
new file mode 100644
index 0000000000..62e34978ec
--- /dev/null
+++ b/board/k+p/kp_imx6q_tpc/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_KP_IMX6Q_TPC
+
+config SYS_BOARD
+ default "kp_imx6q_tpc"
+
+config SYS_VENDOR
+ default "k+p"
+
+config SYS_CONFIG_NAME
+ default "kp_imx6q_tpc"
+
+endif
diff --git a/board/k+p/kp_imx6q_tpc/MAINTAINERS b/board/k+p/kp_imx6q_tpc/MAINTAINERS
new file mode 100644
index 0000000000..6c4c8dd28e
--- /dev/null
+++ b/board/k+p/kp_imx6q_tpc/MAINTAINERS
@@ -0,0 +1,6 @@
+KP_IMX6Q_TPC BOARD
+M: Lukasz Majewski <lukma@denx.de>
+S: Maintained
+F: board/k+p/kp_imx6q_tpc/
+F: include/configs/kp_imx6q_tpc.h
+F: configs/kp_imx6q_tpc_defconfig
diff --git a/board/k+p/kp_imx6q_tpc/Makefile b/board/k+p/kp_imx6q_tpc/Makefile
new file mode 100644
index 0000000000..51cbd3e843
--- /dev/null
+++ b/board/k+p/kp_imx6q_tpc/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y := kp_imx6q_tpc_spl.o
+else
+obj-y := kp_imx6q_tpc.o
+endif
diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
new file mode 100644
index 0000000000..9a5b88029f
--- /dev/null
+++ b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
@@ -0,0 +1,302 @@
+/*
+ * K+P iMX6Q KP_IMX6Q_TPC board configuration
+ *
+ * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <errno.h>
+#include <fsl_esdhc.h>
+#include <fuse.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <net.h>
+#include <netdev.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ENET_PAD_CTRL \
+ (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL \
+ (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+static struct i2c_pads_info kp_imx6q_tpc_i2c_pad_info0 = {
+ .scl = {
+ .i2c_mode = MX6Q_PAD_CSI0_DAT9__I2C1_SCL | PC,
+ .gpio_mode = MX6Q_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
+ .gp = IMX_GPIO_NR(5, 27)
+ },
+ .sda = {
+ .i2c_mode = MX6Q_PAD_CSI0_DAT8__I2C1_SDA | PC,
+ .gpio_mode = MX6Q_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
+ .gp = IMX_GPIO_NR(5, 26)
+ }
+};
+
+static struct i2c_pads_info kp_imx6q_tpc_i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
+ .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
+ .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+ return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+#ifdef CONFIG_FEC_MXC
+static iomux_v3_cfg_t const enet_pads[] = {
+ IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
+ MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
+ MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ /* AR8031 PHY Reset */
+ IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static void eth_phy_reset(void)
+{
+ /* Reset AR8031 PHY */
+ gpio_direction_output(IMX_GPIO_NR(1, 25), 0);
+ mdelay(10);
+ gpio_set_value(IMX_GPIO_NR(1, 25), 1);
+ udelay(100);
+}
+
+static int setup_fec_clock(void)
+{
+ struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* set gpr1[21] to select anatop clock */
+ clrsetbits_le32(&iomuxc_regs->gpr[1], 0x1 << 21, 0x1 << 21);
+
+ return enable_fec_anatop_clock(0, ENET_50MHZ);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ SETUP_IOMUX_PADS(enet_pads);
+ setup_fec_clock();
+ eth_phy_reset();
+
+ return cpu_eth_init(bis);
+}
+
+static int ar8031_phy_fixup(struct phy_device *phydev)
+{
+ unsigned short val;
+
+ /* To enable AR8031 output a 125MHz clk from CLK_25M */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
+
+ val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
+ val &= 0xffe3;
+ val |= 0x18;
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
+
+ /* introduce tx clock delay */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
+ val |= 0x0100;
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
+
+ return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ ar8031_phy_fixup(phydev);
+
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+
+#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
+static struct fsl_esdhc_cfg usdhc_cfg[] = {
+ { USDHC2_BASE_ADDR },
+ { USDHC4_BASE_ADDR },
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+ switch (cfg->esdhc_base) {
+ case USDHC2_BASE_ADDR:
+ return !gpio_get_value(USDHC2_CD_GPIO);
+ case USDHC4_BASE_ADDR:
+ return 1; /* eMMC/uSDHC4 is always present */
+ }
+
+ return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int i, ret;
+
+ /*
+ * According to the board_mmc_init() the following map is done:
+ * (U-Boot device node) (Physical Port)
+ * mmc0 micro SD
+ * mmc2 eMMC
+ */
+ gpio_direction_input(USDHC2_CD_GPIO);
+
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+static void setup_usb(void)
+{
+ /*
+ * Set daisy chain for otg_pin_id on MX6Q.
+ * For MX6DL, this bit is reserved.
+ */
+ imx_iomux_set_gpr_register(1, 13, 1, 0);
+}
+
+int board_usb_phy_mode(int port)
+{
+ if (port == 1)
+ return USB_INIT_HOST;
+ else
+ return USB_INIT_DEVICE;
+}
+
+int board_ehci_power(int port, int on)
+{
+ switch (port) {
+ case 0:
+ break;
+ case 1:
+ gpio_direction_output(IMX_GPIO_NR(3, 31), !!on);
+ break;
+ default:
+ printf("MXC USB port %d not yet supported\n", port);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+#ifdef CONFIG_USB_EHCI_MX6
+ setup_usb();
+#endif
+
+ return 0;
+}
+
+int board_init(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ /* Enable eim_slow clocks */
+ setbits_le32(&mxc_ccm->CCGR6, 0x1 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET);
+
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &kp_imx6q_tpc_i2c_pad_info0);
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &kp_imx6q_tpc_i2c_pad_info1);
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ /* 8 bit bus width */
+ {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+
+ env_set("boardname", "kp-tpc");
+ env_set("boardsoc", "imx6q");
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: K+P KP_IMX6Q_TPC i.MX6Q\n");
+ return 0;
+}
diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
new file mode 100644
index 0000000000..b5723b41c1
--- /dev/null
+++ b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
@@ -0,0 +1,283 @@
+/*
+ * K+P iMX6Q KP_IMX6Q_TPC board configuration
+ *
+ * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <fuse.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <spl.h>
+
+#define UART_PAD_CTRL \
+ (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL \
+ (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00C03F3F, &ccm->CCGR0);
+ writel(0x0030FC03, &ccm->CCGR1);
+ writel(0x0FFFC000, &ccm->CCGR2);
+ writel(0x3FF00000, &ccm->CCGR3);
+ writel(0x00FFF300, &ccm->CCGR4);
+ writel(0x0F0000C3, &ccm->CCGR5);
+ writel(0x000003FF, &ccm->CCGR6);
+}
+
+/* onboard microSD */
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+/* eMMC */
+static iomux_v3_cfg_t const usdhc4_pads[] = {
+ IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
+/* SD */
+static void setup_iomux_sd(void)
+{
+ SETUP_IOMUX_PADS(usdhc2_pads);
+ SETUP_IOMUX_PADS(usdhc4_pads);
+}
+
+/* UART */
+static iomux_v3_cfg_t const uart1_pads[] = {
+ IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static void setup_iomux_uart(void)
+{
+ SETUP_IOMUX_PADS(uart1_pads);
+}
+
+/* USB */
+static iomux_v3_cfg_t const usb_pads[] = {
+ IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static void setup_iomux_usb(void)
+{
+ SETUP_IOMUX_PADS(usb_pads);
+}
+
+/*
+ * This code has been extracted from mx6q_8x_mt41K256.cfg DCD
+ * NXP's BSP u-boot mx6q_8x_mt41K256.cfg rel_imx_4.1.15_2.1.0_ga
+ */
+static int mx6q_dcd_table[] = {
+ 0x020e0798, 0x000C0000,
+ 0x020e0758, 0x00000000,
+ 0x020e0588, 0x00000030,
+ 0x020e0594, 0x00000030,
+ 0x020e056c, 0x00000030,
+ 0x020e0578, 0x00000030,
+ 0x020e074c, 0x00000030,
+ 0x020e057c, 0x00000030,
+ 0x020e058c, 0x00000000,
+ 0x020e059c, 0x00000030,
+ 0x020e05a0, 0x00000030,
+ 0x020e078c, 0x00000030,
+ 0x020e0750, 0x00020000,
+ 0x020e05a8, 0x00000018,
+ 0x020e05b0, 0x00000018,
+ 0x020e0524, 0x00000018,
+ 0x020e051c, 0x00000018,
+ 0x020e0518, 0x00000018,
+ 0x020e050c, 0x00000018,
+ 0x020e05b8, 0x00000018,
+ 0x020e05c0, 0x00000018,
+ 0x020e0774, 0x00020000,
+ 0x020e0784, 0x00000018,
+ 0x020e0788, 0x00000018,
+ 0x020e0794, 0x00000018,
+ 0x020e079c, 0x00000018,
+ 0x020e07a0, 0x00000018,
+ 0x020e07a4, 0x00000018,
+ 0x020e07a8, 0x00000018,
+ 0x020e0748, 0x00000018,
+ 0x020e05ac, 0x00000018,
+ 0x020e05b4, 0x00000018,
+ 0x020e0528, 0x00000018,
+ 0x020e0520, 0x00000018,
+ 0x020e0514, 0x00000018,
+ 0x020e0510, 0x00000018,
+ 0x020e05bc, 0x00000018,
+ 0x020e05c4, 0x00000018,
+ 0x021b0800, 0xa1390003,
+ 0x021b080c, 0x001F001F,
+ 0x021b0810, 0x001F001F,
+ 0x021b480c, 0x001F001F,
+ 0x021b4810, 0x001F001F,
+ 0x021b083c, 0x43270338,
+ 0x021b0840, 0x03200314,
+ 0x021b483c, 0x431A032F,
+ 0x021b4840, 0x03200263,
+ 0x021b0848, 0x4B434748,
+ 0x021b4848, 0x4445404C,
+ 0x021b0850, 0x38444542,
+ 0x021b4850, 0x4935493A,
+ 0x021b081c, 0x33333333,
+ 0x021b0820, 0x33333333,
+ 0x021b0824, 0x33333333,
+ 0x021b0828, 0x33333333,
+ 0x021b481c, 0x33333333,
+ 0x021b4820, 0x33333333,
+ 0x021b4824, 0x33333333,
+ 0x021b4828, 0x33333333,
+ 0x021b08b8, 0x00000800,
+ 0x021b48b8, 0x00000800,
+ 0x021b0004, 0x00020036,
+ 0x021b0008, 0x09444040,
+ 0x021b000c, 0x8A8F7955,
+ 0x021b0010, 0xFF328F64,
+ 0x021b0014, 0x01FF00DB,
+ 0x021b0018, 0x00001740,
+ 0x021b001c, 0x00008000,
+ 0x021b002c, 0x000026d2,
+ 0x021b0030, 0x008F1023,
+ 0x021b0040, 0x00000047,
+ 0x021b0000, 0x841A0000,
+ 0x021b001c, 0x04088032,
+ 0x021b001c, 0x00008033,
+ 0x021b001c, 0x00048031,
+ 0x021b001c, 0x09408030,
+ 0x021b001c, 0x04008040,
+ 0x021b0020, 0x00005800,
+ 0x021b0818, 0x00011117,
+ 0x021b4818, 0x00011117,
+ 0x021b0004, 0x00025576,
+ 0x021b0404, 0x00011006,
+ 0x021b001c, 0x00000000,
+};
+
+static void ddr_init(int *table, int size)
+{
+ int i;
+
+ for (i = 0; i < size / 2 ; i++)
+ writel(table[2 * i + 1], table[2 * i]);
+}
+
+struct fsl_esdhc_cfg usdhc_cfg[] = {
+ {USDHC2_BASE_ADDR},
+ {USDHC4_BASE_ADDR},
+};
+
+#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC2_BASE_ADDR:
+ ret = !gpio_get_value(USDHC2_CD_GPIO);
+ break;
+ case USDHC4_BASE_ADDR:
+ ret = 1; /* eMMC/uSDHC4 is always present */
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bd)
+{
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned int reg = readl(&psrc->sbmr1) >> 11;
+ /*
+ * Upon reading BOOT_CFG register the following map is done:
+ * Bit 11 and 12 of BOOT_CFG register can determine the current
+ * mmc port
+ * 0x1 SD1
+ * 0x3 SD4
+ */
+
+ switch (reg & 0x3) {
+ case 0x1:
+ SETUP_IOMUX_PADS(usdhc2_pads);
+ usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ case 0x3:
+ SETUP_IOMUX_PADS(usdhc4_pads);
+ usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ }
+
+ return fsl_esdhc_initialize(bd, &usdhc_cfg[0]);
+}
+
+void board_init_f(ulong dummy)
+{
+ /* Setup DDR3 from NXP's BSP DCD file */
+ ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
+
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ ccgr_init();
+ gpr_init();
+
+ /* setup GP timer */
+ timer_init();
+
+ setup_iomux_sd();
+ setup_iomux_uart();
+ setup_iomux_usb();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
diff --git a/configs/kp_imx6q_tpc_defconfig b/configs/kp_imx6q_tpc_defconfig
new file mode 100644
index 0000000000..d2c6e2e6ba
--- /dev/null
+++ b/configs/kp_imx6q_tpc_defconfig
@@ -0,0 +1,42 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_MX6_DDRCAL=y
+CONFIG_TARGET_KP_IMX6Q_TPC=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTDELAY=3
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SPL=y
+CONFIG_SPL_RAW_IMAGE_SUPPORT=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_STOP_STR="."
+# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
+CONFIG_IMX_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
new file mode 100644
index 0000000000..74143a2dba
--- /dev/null
+++ b/include/configs/kp_imx6q_tpc.h
@@ -0,0 +1,128 @@
+/*
+ * K+P iMX6Q KP_IMX6Q_TPC board configuration
+ *
+ * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __KP_IMX6Q_TPC_IMX6_CONFIG_H_
+#define __KP_IMX6Q_TPC_IMX6_CONFIG_H_
+
+#include <asm/arch/imx-regs.h>
+
+#include "mx6_common.h"
+
+/* SPL */
+#include "imx6_spl.h" /* common IMX6 SPL configuration */
+
+/* Miscellaneous configurable options */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_BOUNCE_BUFFER
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
+
+/* FEC ethernet */
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 0
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/* Fuses */
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 = SDHC4 (eMMC) */
+
+/* UART */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* USB Configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
+#endif
+
+/* Watchdog */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_IMX_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=ttymxc0,115200\0" \
+ "fdt_addr=0x18000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "kernel_addr_r=0x10008000\0" \
+ "fdt_addr_r=0x13000000\0" \
+ "ramdisk_addr_r=0x18000000\0" \
+ "scriptaddr=0x14000000\0" \
+ "kernel_file=fitImage\0"\
+ BOOTENV
+
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
+ func(USB, usb, 0) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Environment */
+#define CONFIG_ENV_SIZE (SZ_8K)
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+
+#endif /* __KP_IMX6Q_TPC_IMX6_CONFIG_H_ */
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v1 2/2] boot: script: The boot.scr file for K+P's boards
2018-03-14 10:07 [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Lukasz Majewski
@ 2018-03-14 10:07 ` Lukasz Majewski
2018-03-29 16:10 ` Stefano Babic
2018-03-29 16:10 ` [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Stefano Babic
1 sibling, 1 reply; 5+ messages in thread
From: Lukasz Majewski @ 2018-03-14 10:07 UTC (permalink / raw)
To: u-boot
By using this file one can avoid cluttering <board>.h file with u-boot
HUSH commands necessary for booting target device.
With such approach the commands are stored only in one place and can be
reused if needed.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
board/k+p/bootscripts/tpcboot.cmd | 96 +++++++++++++++++++++++++++++++++++++++
1 file changed, 96 insertions(+)
create mode 100644 board/k+p/bootscripts/tpcboot.cmd
diff --git a/board/k+p/bootscripts/tpcboot.cmd b/board/k+p/bootscripts/tpcboot.cmd
new file mode 100644
index 0000000000..f6d59a1186
--- /dev/null
+++ b/board/k+p/bootscripts/tpcboot.cmd
@@ -0,0 +1,96 @@
+#
+# Copyright (C) 2018
+# Lukasz Majewski, DENX Software Engineering, lukma at denx.de
+#
+#
+# This is an example file to generate boot.scr - a boot script for U-Boot
+# Generate boot.scr:
+# ./tools/mkimage -c none -A arm -T script -d tpcboot.cmd boot.scr
+#
+# SPDX-License-Identifier: GPL-2.0+
+
+
+# Input envs (to be set in environment)
+# Mandatory:
+# kernel_file = "fitImage"
+# boardname = "XXXX" // set automatically in u-boot
+# boardsoc = "imx6q" // set automatically in u-boot
+#
+# Optional:
+# bootcmd_force = "nfs" "tftp_kernel"
+# If not set - eMMC/SD boot
+
+# Generic setup
+setenv mmcroot "/dev/mmcblk${devnum}p2 rootwait rw"
+setenv displayargs ""
+setenv mmcargs "setenv bootargs console=${console} ${smp} root=${mmcroot} \
+ ${displayargs}"
+setenv boot_fitImage "
+ setenv fdt_conf 'conf@${boardsoc}-${boardname}.dtb';
+ setenv itbcfg "\"#\${fdt_conf}\"";
+ print itbcfg;
+ bootm '${loadaddr}${itbcfg}';"
+
+#------------------------------------------------------------
+#
+# Provide default 'bootcmd' command
+#------------------------------------------------------------
+setenv bootcmd "
+if test -e ${devtype} ${devnum}:${distro_bootpart} ${kernel_file}; then
+ echo Found kernel image: ${kernel_file};
+ if load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} \
+ ${kernel_file}; then
+ run mmcargs;
+ run boot_fitImage;
+ fi;
+fi;"
+
+#------------------------------------------------------------
+#
+# Provide 'boot_tftp_kernel' command
+#------------------------------------------------------------
+setenv download_kernel "tftpboot ${loadaddr} ${kernel_file}"
+
+setenv boot_tftp_kernel "
+if run download_kernel; then
+ run mmcargs;
+ run boot_fitImage;
+fi"
+
+#------------------------------------------------------------
+#
+# Provide 'boot_nfs' command
+#------------------------------------------------------------
+setenv rootpath "/srv/tftp/KP/rootfs"
+setenv nfsargs "setenv bootargs root=/dev/nfs rw \
+ nfsroot=${serverip}:${rootpath},nolock,nfsvers=3"
+setenv addip "setenv bootargs ${bootargs} \
+ ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:\
+ ${hostname}:eth0:on"
+
+setenv boot_nfs "
+if run download_kernel; then
+ run nfsargs;
+ run addip;
+ setenv bootargs ${bootargs} console=${console};
+
+ run boot_fitImage;
+fi"
+
+#------------------------------------------------------------
+#
+# Set correct boot flow
+#------------------------------------------------------------
+
+setenv bcmd "
+if test ! -n ${bootcmd_force}; then
+ run bootcmd;
+fi;
+if test ${bootcmd_force} = nfs; then
+ run boot_nfs;
+else if test ${bootcmd_force} = tftp_kernel; then
+ run boot_tftp_kernel;
+ fi;
+fi"
+
+run bcmd
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board
2018-03-14 10:07 [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Lukasz Majewski
2018-03-14 10:07 ` [U-Boot] [PATCH v1 2/2] boot: script: The boot.scr file for K+P's boards Lukasz Majewski
@ 2018-03-29 16:10 ` Stefano Babic
2018-03-29 16:43 ` Lukasz Majewski
1 sibling, 1 reply; 5+ messages in thread
From: Stefano Babic @ 2018-03-29 16:10 UTC (permalink / raw)
To: u-boot
Hi Lukasz,
On 14/03/2018 11:07, Lukasz Majewski wrote:
> This commit provides support for Kieback & Peter GmbH IMX6Q based
> TPC board.
>
Maybe you can add the U-Boot output (as done by other boards) to make
clear which peripherals are available.
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
>
> ---
>
> arch/arm/mach-imx/mx6/Kconfig | 11 ++
> board/k+p/kp_imx6q_tpc/Kconfig | 12 ++
> board/k+p/kp_imx6q_tpc/MAINTAINERS | 6 +
> board/k+p/kp_imx6q_tpc/Makefile | 11 ++
> board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 302 ++++++++++++++++++++++++++++++
> board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 283 ++++++++++++++++++++++++++++
> configs/kp_imx6q_tpc_defconfig | 42 +++++
> include/configs/kp_imx6q_tpc.h | 128 +++++++++++++
> 8 files changed, 795 insertions(+)
> create mode 100644 board/k+p/kp_imx6q_tpc/Kconfig
> create mode 100644 board/k+p/kp_imx6q_tpc/MAINTAINERS
> create mode 100644 board/k+p/kp_imx6q_tpc/Makefile
> create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
> create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
> create mode 100644 configs/kp_imx6q_tpc_defconfig
> create mode 100644 include/configs/kp_imx6q_tpc.h
>
> diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
> index d4ce38db8d..aa6f5facbf 100644
> --- a/arch/arm/mach-imx/mx6/Kconfig
> +++ b/arch/arm/mach-imx/mx6/Kconfig
> @@ -387,6 +387,16 @@ config TARGET_TBS2910
> config TARGET_TITANIUM
> bool "titanium"
>
> +config TARGET_KP_IMX6Q_TPC
> + bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
> + select MX6QDL
> + select BOARD_LATE_INIT
> + select BOARD_EARLY_INIT_F
> + select SUPPORT_SPL
> + select DM
> + select DM_THERMAL
> + imply CMD_SPL
> +
> config TARGET_TQMA6
> bool "TQ Systems TQMa6 board"
> select BOARD_LATE_INIT
> @@ -493,6 +503,7 @@ source "board/tbs/tbs2910/Kconfig"
> source "board/tqc/tqma6/Kconfig"
> source "board/toradex/apalis_imx6/Kconfig"
> source "board/toradex/colibri_imx6/Kconfig"
> +source "board/k+p/kp_imx6q_tpc/Kconfig"
> source "board/udoo/Kconfig"
> source "board/udoo/neo/Kconfig"
> source "board/wandboard/Kconfig"
> diff --git a/board/k+p/kp_imx6q_tpc/Kconfig b/board/k+p/kp_imx6q_tpc/Kconfig
> new file mode 100644
> index 0000000000..62e34978ec
> --- /dev/null
> +++ b/board/k+p/kp_imx6q_tpc/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_KP_IMX6Q_TPC
> +
> +config SYS_BOARD
> + default "kp_imx6q_tpc"
> +
> +config SYS_VENDOR
> + default "k+p"
> +
> +config SYS_CONFIG_NAME
> + default "kp_imx6q_tpc"
> +
> +endif
> diff --git a/board/k+p/kp_imx6q_tpc/MAINTAINERS b/board/k+p/kp_imx6q_tpc/MAINTAINERS
> new file mode 100644
> index 0000000000..6c4c8dd28e
> --- /dev/null
> +++ b/board/k+p/kp_imx6q_tpc/MAINTAINERS
> @@ -0,0 +1,6 @@
> +KP_IMX6Q_TPC BOARD
> +M: Lukasz Majewski <lukma@denx.de>
> +S: Maintained
> +F: board/k+p/kp_imx6q_tpc/
> +F: include/configs/kp_imx6q_tpc.h
> +F: configs/kp_imx6q_tpc_defconfig
> diff --git a/board/k+p/kp_imx6q_tpc/Makefile b/board/k+p/kp_imx6q_tpc/Makefile
> new file mode 100644
> index 0000000000..51cbd3e843
> --- /dev/null
> +++ b/board/k+p/kp_imx6q_tpc/Makefile
> @@ -0,0 +1,11 @@
> +#
> +# Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +ifdef CONFIG_SPL_BUILD
> +obj-y := kp_imx6q_tpc_spl.o
> +else
> +obj-y := kp_imx6q_tpc.o
> +endif
> diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
> new file mode 100644
> index 0000000000..9a5b88029f
> --- /dev/null
> +++ b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
> @@ -0,0 +1,302 @@
> +/*
> + * K+P iMX6Q KP_IMX6Q_TPC board configuration
> + *
> + * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/crm_regs.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/arch/mx6-pins.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/mach-imx/boot_mode.h>
> +#include <asm/mach-imx/iomux-v3.h>
> +#include <asm/mach-imx/mxc_i2c.h>
> +#include <errno.h>
> +#include <fsl_esdhc.h>
> +#include <fuse.h>
> +#include <i2c.h>
> +#include <miiphy.h>
> +#include <mmc.h>
> +#include <net.h>
> +#include <netdev.h>
> +#include <usb.h>
> +#include <usb/ehci-ci.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define ENET_PAD_CTRL \
> + (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
> + PAD_CTL_HYS)
> +
> +#define I2C_PAD_CTRL \
> + (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
> + PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
> +
> +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
> +
> +static struct i2c_pads_info kp_imx6q_tpc_i2c_pad_info0 = {
> + .scl = {
> + .i2c_mode = MX6Q_PAD_CSI0_DAT9__I2C1_SCL | PC,
> + .gpio_mode = MX6Q_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
> + .gp = IMX_GPIO_NR(5, 27)
> + },
> + .sda = {
> + .i2c_mode = MX6Q_PAD_CSI0_DAT8__I2C1_SDA | PC,
> + .gpio_mode = MX6Q_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
> + .gp = IMX_GPIO_NR(5, 26)
> + }
> +};
> +
> +static struct i2c_pads_info kp_imx6q_tpc_i2c_pad_info1 = {
> + .scl = {
> + .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
> + .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
> + .gp = IMX_GPIO_NR(4, 12)
> + },
> + .sda = {
> + .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
> + .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
> + .gp = IMX_GPIO_NR(4, 13)
> + }
> +};
> +
> +int dram_init(void)
> +{
> + gd->ram_size = imx_ddr_size();
> + return 0;
> +}
> +
> +/*
> + * Do not overwrite the console
> + * Use always serial for U-Boot console
> + */
> +int overwrite_console(void)
> +{
> + return 1;
> +}
> +
> +#ifdef CONFIG_FEC_MXC
> +static iomux_v3_cfg_t const enet_pads[] = {
> + IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
> + MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
> + MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + /* AR8031 PHY Reset */
> + IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> +};
> +
> +static void eth_phy_reset(void)
> +{
> + /* Reset AR8031 PHY */
> + gpio_direction_output(IMX_GPIO_NR(1, 25), 0);
> + mdelay(10);
> + gpio_set_value(IMX_GPIO_NR(1, 25), 1);
> + udelay(100);
> +}
> +
> +static int setup_fec_clock(void)
> +{
> + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
> +
> + /* set gpr1[21] to select anatop clock */
> + clrsetbits_le32(&iomuxc_regs->gpr[1], 0x1 << 21, 0x1 << 21);
> +
> + return enable_fec_anatop_clock(0, ENET_50MHZ);
> +}
> +
> +int board_eth_init(bd_t *bis)
> +{
> + SETUP_IOMUX_PADS(enet_pads);
> + setup_fec_clock();
> + eth_phy_reset();
> +
> + return cpu_eth_init(bis);
> +}
> +
> +static int ar8031_phy_fixup(struct phy_device *phydev)
> +{
> + unsigned short val;
> +
> + /* To enable AR8031 output a 125MHz clk from CLK_25M */
> + phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
> +
> + val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
> + val &= 0xffe3;
> + val |= 0x18;
> + phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
> +
> + /* introduce tx clock delay */
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
> + val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
> + val |= 0x0100;
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
> +
> + return 0;
> +}
> +
> +int board_phy_config(struct phy_device *phydev)
> +{
> + ar8031_phy_fixup(phydev);
> +
> + if (phydev->drv->config)
> + phydev->drv->config(phydev);
> +
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_FSL_ESDHC
> +
> +#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
> +static struct fsl_esdhc_cfg usdhc_cfg[] = {
> + { USDHC2_BASE_ADDR },
> + { USDHC4_BASE_ADDR },
> +};
> +
> +int board_mmc_getcd(struct mmc *mmc)
> +{
> + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> +
> + switch (cfg->esdhc_base) {
> + case USDHC2_BASE_ADDR:
> + return !gpio_get_value(USDHC2_CD_GPIO);
> + case USDHC4_BASE_ADDR:
> + return 1; /* eMMC/uSDHC4 is always present */
> + }
> +
> + return 0;
> +}
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + int i, ret;
> +
> + /*
> + * According to the board_mmc_init() the following map is done:
> + * (U-Boot device node) (Physical Port)
> + * mmc0 micro SD
> + * mmc2 eMMC
> + */
> + gpio_direction_input(USDHC2_CD_GPIO);
> +
> + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
> + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
> +
> + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
> + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_USB_EHCI_MX6
> +static void setup_usb(void)
> +{
> + /*
> + * Set daisy chain for otg_pin_id on MX6Q.
> + * For MX6DL, this bit is reserved.
> + */
> + imx_iomux_set_gpr_register(1, 13, 1, 0);
> +}
> +
> +int board_usb_phy_mode(int port)
> +{
> + if (port == 1)
> + return USB_INIT_HOST;
> + else
> + return USB_INIT_DEVICE;
> +}
> +
> +int board_ehci_power(int port, int on)
> +{
> + switch (port) {
> + case 0:
> + break;
> + case 1:
> + gpio_direction_output(IMX_GPIO_NR(3, 31), !!on);
> + break;
> + default:
> + printf("MXC USB port %d not yet supported\n", port);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +int board_early_init_f(void)
> +{
> +#ifdef CONFIG_USB_EHCI_MX6
> + setup_usb();
> +#endif
> +
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
> +
> + /* address of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
> +
> + /* Enable eim_slow clocks */
> + setbits_le32(&mxc_ccm->CCGR6, 0x1 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET);
> +
> + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &kp_imx6q_tpc_i2c_pad_info0);
> + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &kp_imx6q_tpc_i2c_pad_info1);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_CMD_BMODE
> +static const struct boot_mode board_boot_modes[] = {
> + /* 4 bit bus width */
> + {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
> + /* 8 bit bus width */
> + {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
> + {NULL, 0},
> +};
> +#endif
> +
> +int board_late_init(void)
> +{
> +#ifdef CONFIG_CMD_BMODE
> + add_board_boot_modes(board_boot_modes);
> +#endif
> +
> + env_set("boardname", "kp-tpc");
> + env_set("boardsoc", "imx6q");
> + return 0;
> +}
> +
> +int checkboard(void)
> +{
> + puts("Board: K+P KP_IMX6Q_TPC i.MX6Q\n");
> + return 0;
> +}
> diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
> new file mode 100644
> index 0000000000..b5723b41c1
> --- /dev/null
> +++ b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
> @@ -0,0 +1,283 @@
> +/*
> + * K+P iMX6Q KP_IMX6Q_TPC board configuration
> + *
> + * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/crm_regs.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/arch/mx6-ddr.h>
> +#include <asm/arch/mx6-pins.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/gpio.h>
> +#include <asm/mach-imx/boot_mode.h>
> +#include <asm/mach-imx/iomux-v3.h>
> +#include <asm/mach-imx/mxc_i2c.h>
> +#include <asm/io.h>
> +#include <errno.h>
> +#include <fuse.h>
> +#include <fsl_esdhc.h>
> +#include <i2c.h>
> +#include <mmc.h>
> +#include <spl.h>
> +
> +#define UART_PAD_CTRL \
> + (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
> + PAD_CTL_SRE_FAST | PAD_CTL_HYS)
> +
> +#define USDHC_PAD_CTRL \
> + (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
> + PAD_CTL_SRE_FAST | PAD_CTL_HYS)
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static void ccgr_init(void)
> +{
> + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
> +
> + writel(0x00C03F3F, &ccm->CCGR0);
> + writel(0x0030FC03, &ccm->CCGR1);
> + writel(0x0FFFC000, &ccm->CCGR2);
> + writel(0x3FF00000, &ccm->CCGR3);
> + writel(0x00FFF300, &ccm->CCGR4);
> + writel(0x0F0000C3, &ccm->CCGR5);
> + writel(0x000003FF, &ccm->CCGR6);
> +}
> +
> +/* onboard microSD */
> +static iomux_v3_cfg_t const usdhc2_pads[] = {
> + IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> +};
> +
> +/* eMMC */
> +static iomux_v3_cfg_t const usdhc4_pads[] = {
> + IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> +};
> +
> +/* SD */
> +static void setup_iomux_sd(void)
> +{
> + SETUP_IOMUX_PADS(usdhc2_pads);
> + SETUP_IOMUX_PADS(usdhc4_pads);
> +}
> +
> +/* UART */
> +static iomux_v3_cfg_t const uart1_pads[] = {
> + IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
> + IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
> +};
> +
> +static void setup_iomux_uart(void)
> +{
> + SETUP_IOMUX_PADS(uart1_pads);
> +}
> +
> +/* USB */
> +static iomux_v3_cfg_t const usb_pads[] = {
> + IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> +};
> +
> +static void setup_iomux_usb(void)
> +{
> + SETUP_IOMUX_PADS(usb_pads);
> +}
> +
> +/*
> + * This code has been extracted from mx6q_8x_mt41K256.cfg DCD
> + * NXP's BSP u-boot mx6q_8x_mt41K256.cfg rel_imx_4.1.15_2.1.0_ga
> + */
> +static int mx6q_dcd_table[] = {
> + 0x020e0798, 0x000C0000,
> + 0x020e0758, 0x00000000,
Well.....
This is a Quad, well supported, we have a nice framework to setup the
DDR. I do not like to see this dump of table in code. Which is the added
value compared to the DCD table using the i.MX header ?
> + 0x020e0588, 0x00000030,
> + 0x020e0594, 0x00000030,
> + 0x020e056c, 0x00000030,
> + 0x020e0578, 0x00000030,
> + 0x020e074c, 0x00000030,
> + 0x020e057c, 0x00000030,
> + 0x020e058c, 0x00000000,
> + 0x020e059c, 0x00000030,
> + 0x020e05a0, 0x00000030,
> + 0x020e078c, 0x00000030,
There are structure and function to set these.
> + 0x020e0750, 0x00020000,
> + 0x020e05a8, 0x00000018,
> + 0x020e05b0, 0x00000018,
> + 0x020e0524, 0x00000018,
> + 0x020e051c, 0x00000018,
> + 0x020e0518, 0x00000018,
> + 0x020e050c, 0x00000018,
> + 0x020e05b8, 0x00000018,
> + 0x020e05c0, 0x00000018,
> + 0x020e0774, 0x00020000,
> + 0x020e0784, 0x00000018,
> + 0x020e0788, 0x00000018,
> + 0x020e0794, 0x00000018,
> + 0x020e079c, 0x00000018,
> + 0x020e07a0, 0x00000018,
> + 0x020e07a4, 0x00000018,
> + 0x020e07a8, 0x00000018,
> + 0x020e0748, 0x00000018,
> + 0x020e05ac, 0x00000018,
> + 0x020e05b4, 0x00000018,
> + 0x020e0528, 0x00000018,
> + 0x020e0520, 0x00000018,
> + 0x020e0514, 0x00000018,
> + 0x020e0510, 0x00000018,
> + 0x020e05bc, 0x00000018,
> + 0x020e05c4, 0x00000018,
> + 0x021b0800, 0xa1390003,
> + 0x021b080c, 0x001F001F,
> + 0x021b0810, 0x001F001F,
> + 0x021b480c, 0x001F001F,
> + 0x021b4810, 0x001F001F,
> + 0x021b083c, 0x43270338,
> + 0x021b0840, 0x03200314,
> + 0x021b483c, 0x431A032F,
> + 0x021b4840, 0x03200263,
> + 0x021b0848, 0x4B434748,
> + 0x021b4848, 0x4445404C,
> + 0x021b0850, 0x38444542,
> + 0x021b4850, 0x4935493A,
> + 0x021b081c, 0x33333333,
> + 0x021b0820, 0x33333333,
> + 0x021b0824, 0x33333333,
> + 0x021b0828, 0x33333333,
> + 0x021b481c, 0x33333333,
> + 0x021b4820, 0x33333333,
> + 0x021b4824, 0x33333333,
> + 0x021b4828, 0x33333333,
Like calibration and so on. Please change this as done by other board,
using structures ( mx6_ddr3_cfg, mx6dq_iomux_grp_regs) and calling
mx6dq_dram_iocfg() and mx6_dram_cfg() - thanks !
> + 0x021b08b8, 0x00000800,
> + 0x021b48b8, 0x00000800,
> + 0x021b0004, 0x00020036,
> + 0x021b0008, 0x09444040,
> + 0x021b000c, 0x8A8F7955,
> + 0x021b0010, 0xFF328F64,
> + 0x021b0014, 0x01FF00DB,
> + 0x021b0018, 0x00001740,
> + 0x021b001c, 0x00008000,
> + 0x021b002c, 0x000026d2,
> + 0x021b0030, 0x008F1023,
> + 0x021b0040, 0x00000047,
> + 0x021b0000, 0x841A0000,
> + 0x021b001c, 0x04088032,
> + 0x021b001c, 0x00008033,
> + 0x021b001c, 0x00048031,
> + 0x021b001c, 0x09408030,
> + 0x021b001c, 0x04008040,
> + 0x021b0020, 0x00005800,
> + 0x021b0818, 0x00011117,
> + 0x021b4818, 0x00011117,
> + 0x021b0004, 0x00025576,
> + 0x021b0404, 0x00011006,
> + 0x021b001c, 0x00000000,
> +};
> +
> +static void ddr_init(int *table, int size)
> +{
> + int i;
> +
> + for (i = 0; i < size / 2 ; i++)
> + writel(table[2 * i + 1], table[2 * i]);
Quite nasty....
> +}
> +
> +struct fsl_esdhc_cfg usdhc_cfg[] = {
> + {USDHC2_BASE_ADDR},
> + {USDHC4_BASE_ADDR},
> +};
> +
> +#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
> +int board_mmc_getcd(struct mmc *mmc)
> +{
> + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> + int ret = 0;
> +
> + switch (cfg->esdhc_base) {
> + case USDHC2_BASE_ADDR:
> + ret = !gpio_get_value(USDHC2_CD_GPIO);
> + break;
> + case USDHC4_BASE_ADDR:
> + ret = 1; /* eMMC/uSDHC4 is always present */
> + break;
> + }
> +
> + return ret;
> +}
> +
> +int board_mmc_init(bd_t *bd)
> +{
> + struct src *psrc = (struct src *)SRC_BASE_ADDR;
> + unsigned int reg = readl(&psrc->sbmr1) >> 11;
> + /*
> + * Upon reading BOOT_CFG register the following map is done:
> + * Bit 11 and 12 of BOOT_CFG register can determine the current
> + * mmc port
> + * 0x1 SD1
> + * 0x3 SD4
> + */
> +
> + switch (reg & 0x3) {
> + case 0x1:
> + SETUP_IOMUX_PADS(usdhc2_pads);
> + usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
> + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
> + gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
> + break;
> + case 0x3:
> + SETUP_IOMUX_PADS(usdhc4_pads);
> + usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
> + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
> + gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
> + break;
> + }
> +
> + return fsl_esdhc_initialize(bd, &usdhc_cfg[0]);
> +}
> +
> +void board_init_f(ulong dummy)
> +{
> + /* Setup DDR3 from NXP's BSP DCD file */
> + ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
> +
> + /* setup AIPS and disable watchdog */
> + arch_cpu_init();
> +
> + ccgr_init();
> + gpr_init();
> +
> + /* setup GP timer */
> + timer_init();
> +
> + setup_iomux_sd();
> + setup_iomux_uart();
> + setup_iomux_usb();
> +
> + /* UART clocks enabled and gd valid - init serial console */
> + preloader_console_init();
> +
> + /* Clear the BSS. */
> + memset(__bss_start, 0, __bss_end - __bss_start);
> +
> + /* load/boot image from boot device */
> + board_init_r(NULL, 0);
> +}
> diff --git a/configs/kp_imx6q_tpc_defconfig b/configs/kp_imx6q_tpc_defconfig
> new file mode 100644
> index 0000000000..d2c6e2e6ba
> --- /dev/null
> +++ b/configs/kp_imx6q_tpc_defconfig
> @@ -0,0 +1,42 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MX6=y
> +CONFIG_SYS_TEXT_BASE=0x17800000
> +CONFIG_SPL_GPIO_SUPPORT=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_MX6_DDRCAL=y
> +CONFIG_TARGET_KP_IMX6Q_TPC=y
> +CONFIG_SPL_MMC_SUPPORT=y
> +CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_SPL_WATCHDOG_SUPPORT=y
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_FIT=y
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
> +CONFIG_BOOTDELAY=3
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
> +CONFIG_SPL=y
> +CONFIG_SPL_RAW_IMAGE_SUPPORT=y
> +CONFIG_AUTOBOOT_KEYED=y
> +CONFIG_AUTOBOOT_STOP_STR="."
> +# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_EXT4_WRITE=y
> +# CONFIG_ISO_PARTITION is not set
> +# CONFIG_EFI_PARTITION is not set
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_PHYLIB=y
> +CONFIG_PHY_ATHEROS=y
> +CONFIG_NETDEVICES=y
> +CONFIG_FEC_MXC=y
> +CONFIG_IMX_THERMAL=y
> +CONFIG_USB=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_OF_LIBFDT=y
> diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
> new file mode 100644
> index 0000000000..74143a2dba
> --- /dev/null
> +++ b/include/configs/kp_imx6q_tpc.h
> @@ -0,0 +1,128 @@
> +/*
> + * K+P iMX6Q KP_IMX6Q_TPC board configuration
> + *
> + * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __KP_IMX6Q_TPC_IMX6_CONFIG_H_
> +#define __KP_IMX6Q_TPC_IMX6_CONFIG_H_
> +
> +#include <asm/arch/imx-regs.h>
> +
> +#include "mx6_common.h"
> +
> +/* SPL */
> +#include "imx6_spl.h" /* common IMX6 SPL configuration */
> +
> +/* Miscellaneous configurable options */
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_REVISION_TAG
> +
> +#define CONFIG_BOUNCE_BUFFER
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
> +
> +/* FEC ethernet */
> +#define CONFIG_MII
> +#define IMX_FEC_BASE ENET_BASE_ADDR
> +#define CONFIG_FEC_XCV_TYPE RGMII
> +#define CONFIG_ETHPRIME "FEC"
> +#define CONFIG_FEC_MXC_PHYADDR 0
> +#define CONFIG_ARP_TIMEOUT 200UL
> +
> +/* Fuses */
> +#ifdef CONFIG_CMD_FUSE
> +#define CONFIG_MXC_OCOTP
> +#endif
> +
> +/* I2C Configs */
> +#define CONFIG_SYS_I2C
> +#define CONFIG_SYS_I2C_MXC
> +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
> +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
> +#define CONFIG_SYS_I2C_SPEED 100000
> +
> +/* MMC Configs */
> +#define CONFIG_FSL_ESDHC
> +#define CONFIG_FSL_USDHC
> +#define CONFIG_SYS_FSL_ESDHC_ADDR 0
> +#define CONFIG_SYS_FSL_USDHC_NUM 2
> +#define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 = SDHC4 (eMMC) */
> +
> +/* UART */
> +#define CONFIG_MXC_UART
> +#define CONFIG_MXC_UART_BASE UART1_BASE
> +#define CONFIG_CONS_INDEX 1
> +#define CONFIG_BAUDRATE 115200
> +
> +/* USB Configs */
> +#ifdef CONFIG_CMD_USB
> +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_ASIX
> +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
> +#define CONFIG_MXC_USB_FLAGS 0
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
> +#endif
> +
> +/* Watchdog */
> +#define CONFIG_HW_WATCHDOG
> +#define CONFIG_IMX_WATCHDOG
> +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
> +
> +/* allow to overwrite serial and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
> +
> +#define CONFIG_LOADADDR 0x12000000
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +
> +#ifndef CONFIG_SPL_BUILD
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "console=ttymxc0,115200\0" \
> + "fdt_addr=0x18000000\0" \
> + "fdt_high=0xffffffff\0" \
> + "initrd_high=0xffffffff\0" \
> + "kernel_addr_r=0x10008000\0" \
> + "fdt_addr_r=0x13000000\0" \
> + "ramdisk_addr_r=0x18000000\0" \
> + "scriptaddr=0x14000000\0" \
> + "kernel_file=fitImage\0"\
> + BOOTENV
> +
> +#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + func(MMC, mmc, 0) \
> + func(MMC, mmc, 1) \
> + func(USB, usb, 0) \
> + func(DHCP, dhcp, na)
> +
> +#include <config_distro_bootcmd.h>
> +#endif
> +
> +/* Physical Memory Map */
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
> +
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
> +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
> +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
> +
> +#define CONFIG_SYS_INIT_SP_OFFSET \
> + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
> +/* Environment */
> +#define CONFIG_ENV_SIZE (SZ_8K)
> +#define CONFIG_ENV_OFFSET 0x100000
> +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
> +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
> +
> +#endif /* __KP_IMX6Q_TPC_IMX6_CONFIG_H_ */
>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v1 2/2] boot: script: The boot.scr file for K+P's boards
2018-03-14 10:07 ` [U-Boot] [PATCH v1 2/2] boot: script: The boot.scr file for K+P's boards Lukasz Majewski
@ 2018-03-29 16:10 ` Stefano Babic
0 siblings, 0 replies; 5+ messages in thread
From: Stefano Babic @ 2018-03-29 16:10 UTC (permalink / raw)
To: u-boot
On 14/03/2018 11:07, Lukasz Majewski wrote:
> By using this file one can avoid cluttering <board>.h file with u-boot
> HUSH commands necessary for booting target device.
>
> With such approach the commands are stored only in one place and can be
> reused if needed.
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
>
> ---
>
> board/k+p/bootscripts/tpcboot.cmd | 96 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 96 insertions(+)
> create mode 100644 board/k+p/bootscripts/tpcboot.cmd
>
> diff --git a/board/k+p/bootscripts/tpcboot.cmd b/board/k+p/bootscripts/tpcboot.cmd
> new file mode 100644
> index 0000000000..f6d59a1186
> --- /dev/null
> +++ b/board/k+p/bootscripts/tpcboot.cmd
> @@ -0,0 +1,96 @@
> +#
> +# Copyright (C) 2018
> +# Lukasz Majewski, DENX Software Engineering, lukma at denx.de
> +#
> +#
> +# This is an example file to generate boot.scr - a boot script for U-Boot
> +# Generate boot.scr:
> +# ./tools/mkimage -c none -A arm -T script -d tpcboot.cmd boot.scr
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +
> +
> +# Input envs (to be set in environment)
> +# Mandatory:
> +# kernel_file = "fitImage"
> +# boardname = "XXXX" // set automatically in u-boot
> +# boardsoc = "imx6q" // set automatically in u-boot
> +#
> +# Optional:
> +# bootcmd_force = "nfs" "tftp_kernel"
> +# If not set - eMMC/SD boot
> +
> +# Generic setup
> +setenv mmcroot "/dev/mmcblk${devnum}p2 rootwait rw"
> +setenv displayargs ""
> +setenv mmcargs "setenv bootargs console=${console} ${smp} root=${mmcroot} \
> + ${displayargs}"
> +setenv boot_fitImage "
> + setenv fdt_conf 'conf@${boardsoc}-${boardname}.dtb';
> + setenv itbcfg "\"#\${fdt_conf}\"";
> + print itbcfg;
> + bootm '${loadaddr}${itbcfg}';"
> +
> +#------------------------------------------------------------
> +#
> +# Provide default 'bootcmd' command
> +#------------------------------------------------------------
> +setenv bootcmd "
> +if test -e ${devtype} ${devnum}:${distro_bootpart} ${kernel_file}; then
> + echo Found kernel image: ${kernel_file};
> + if load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} \
> + ${kernel_file}; then
> + run mmcargs;
> + run boot_fitImage;
> + fi;
> +fi;"
> +
> +#------------------------------------------------------------
> +#
> +# Provide 'boot_tftp_kernel' command
> +#------------------------------------------------------------
> +setenv download_kernel "tftpboot ${loadaddr} ${kernel_file}"
> +
> +setenv boot_tftp_kernel "
> +if run download_kernel; then
> + run mmcargs;
> + run boot_fitImage;
> +fi"
> +
> +#------------------------------------------------------------
> +#
> +# Provide 'boot_nfs' command
> +#------------------------------------------------------------
> +setenv rootpath "/srv/tftp/KP/rootfs"
> +setenv nfsargs "setenv bootargs root=/dev/nfs rw \
> + nfsroot=${serverip}:${rootpath},nolock,nfsvers=3"
> +setenv addip "setenv bootargs ${bootargs} \
> + ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:\
> + ${hostname}:eth0:on"
> +
> +setenv boot_nfs "
> +if run download_kernel; then
> + run nfsargs;
> + run addip;
> + setenv bootargs ${bootargs} console=${console};
> +
> + run boot_fitImage;
> +fi"
> +
> +#------------------------------------------------------------
> +#
> +# Set correct boot flow
> +#------------------------------------------------------------
> +
> +setenv bcmd "
> +if test ! -n ${bootcmd_force}; then
> + run bootcmd;
> +fi;
> +if test ${bootcmd_force} = nfs; then
> + run boot_nfs;
> +else if test ${bootcmd_force} = tftp_kernel; then
> + run boot_tftp_kernel;
> + fi;
> +fi"
> +
> +run bcmd
>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board
2018-03-29 16:10 ` [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Stefano Babic
@ 2018-03-29 16:43 ` Lukasz Majewski
0 siblings, 0 replies; 5+ messages in thread
From: Lukasz Majewski @ 2018-03-29 16:43 UTC (permalink / raw)
To: u-boot
Hi Stefano,
> Hi Lukasz,
>
> On 14/03/2018 11:07, Lukasz Majewski wrote:
> > This commit provides support for Kieback & Peter GmbH IMX6Q based
> > TPC board.
> >
>
> Maybe you can add the U-Boot output (as done by other boards) to make
> clear which peripherals are available.
Ok.
>
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
> >
> > ---
> >
> > arch/arm/mach-imx/mx6/Kconfig | 11 ++
> > board/k+p/kp_imx6q_tpc/Kconfig | 12 ++
> > board/k+p/kp_imx6q_tpc/MAINTAINERS | 6 +
> > board/k+p/kp_imx6q_tpc/Makefile | 11 ++
> > board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 302
> > ++++++++++++++++++++++++++++++
> > board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 283
> > ++++++++++++++++++++++++++++
> > configs/kp_imx6q_tpc_defconfig | 42 +++++
> > include/configs/kp_imx6q_tpc.h | 128 +++++++++++++ 8
> > files changed, 795 insertions(+) create mode 100644
> > board/k+p/kp_imx6q_tpc/Kconfig create mode 100644
> > board/k+p/kp_imx6q_tpc/MAINTAINERS create mode 100644
> > board/k+p/kp_imx6q_tpc/Makefile create mode 100644
> > board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c create mode 100644
> > board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c create mode 100644
> > configs/kp_imx6q_tpc_defconfig create mode 100644
> > include/configs/kp_imx6q_tpc.h
> >
> > diff --git a/arch/arm/mach-imx/mx6/Kconfig
> > b/arch/arm/mach-imx/mx6/Kconfig index d4ce38db8d..aa6f5facbf 100644
> > --- a/arch/arm/mach-imx/mx6/Kconfig
> > +++ b/arch/arm/mach-imx/mx6/Kconfig
> > @@ -387,6 +387,16 @@ config TARGET_TBS2910
> > config TARGET_TITANIUM
> > bool "titanium"
> >
> > +config TARGET_KP_IMX6Q_TPC
> > + bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
> > + select MX6QDL
> > + select BOARD_LATE_INIT
> > + select BOARD_EARLY_INIT_F
> > + select SUPPORT_SPL
> > + select DM
> > + select DM_THERMAL
> > + imply CMD_SPL
> > +
> > config TARGET_TQMA6
> > bool "TQ Systems TQMa6 board"
> > select BOARD_LATE_INIT
> > @@ -493,6 +503,7 @@ source "board/tbs/tbs2910/Kconfig"
> > source "board/tqc/tqma6/Kconfig"
> > source "board/toradex/apalis_imx6/Kconfig"
> > source "board/toradex/colibri_imx6/Kconfig"
> > +source "board/k+p/kp_imx6q_tpc/Kconfig"
> > source "board/udoo/Kconfig"
> > source "board/udoo/neo/Kconfig"
> > source "board/wandboard/Kconfig"
> > diff --git a/board/k+p/kp_imx6q_tpc/Kconfig
> > b/board/k+p/kp_imx6q_tpc/Kconfig new file mode 100644
> > index 0000000000..62e34978ec
> > --- /dev/null
> > +++ b/board/k+p/kp_imx6q_tpc/Kconfig
> > @@ -0,0 +1,12 @@
> > +if TARGET_KP_IMX6Q_TPC
> > +
> > +config SYS_BOARD
> > + default "kp_imx6q_tpc"
> > +
> > +config SYS_VENDOR
> > + default "k+p"
> > +
> > +config SYS_CONFIG_NAME
> > + default "kp_imx6q_tpc"
> > +
> > +endif
> > diff --git a/board/k+p/kp_imx6q_tpc/MAINTAINERS
> > b/board/k+p/kp_imx6q_tpc/MAINTAINERS new file mode 100644
> > index 0000000000..6c4c8dd28e
> > --- /dev/null
> > +++ b/board/k+p/kp_imx6q_tpc/MAINTAINERS
> > @@ -0,0 +1,6 @@
> > +KP_IMX6Q_TPC BOARD
> > +M: Lukasz Majewski <lukma@denx.de>
> > +S: Maintained
> > +F: board/k+p/kp_imx6q_tpc/
> > +F: include/configs/kp_imx6q_tpc.h
> > +F: configs/kp_imx6q_tpc_defconfig
> > diff --git a/board/k+p/kp_imx6q_tpc/Makefile
> > b/board/k+p/kp_imx6q_tpc/Makefile new file mode 100644
> > index 0000000000..51cbd3e843
> > --- /dev/null
> > +++ b/board/k+p/kp_imx6q_tpc/Makefile
> > @@ -0,0 +1,11 @@
> > +#
> > +# Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
> > +#
> > +# SPDX-License-Identifier: GPL-2.0+
> > +#
> > +
> > +ifdef CONFIG_SPL_BUILD
> > +obj-y := kp_imx6q_tpc_spl.o
> > +else
> > +obj-y := kp_imx6q_tpc.o
> > +endif
> > diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
> > b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c new file mode 100644
> > index 0000000000..9a5b88029f
> > --- /dev/null
> > +++ b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
> > @@ -0,0 +1,302 @@
> > +/*
> > + * K+P iMX6Q KP_IMX6Q_TPC board configuration
> > + *
> > + * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +
> > +#include <common.h>
> > +#include <asm/arch/clock.h>
> > +#include <asm/arch/crm_regs.h>
> > +#include <asm/arch/imx-regs.h>
> > +#include <asm/arch/iomux.h>
> > +#include <asm/arch/mx6-pins.h>
> > +#include <asm/arch/sys_proto.h>
> > +#include <asm/gpio.h>
> > +#include <asm/io.h>
> > +#include <asm/mach-imx/boot_mode.h>
> > +#include <asm/mach-imx/iomux-v3.h>
> > +#include <asm/mach-imx/mxc_i2c.h>
> > +#include <errno.h>
> > +#include <fsl_esdhc.h>
> > +#include <fuse.h>
> > +#include <i2c.h>
> > +#include <miiphy.h>
> > +#include <mmc.h>
> > +#include <net.h>
> > +#include <netdev.h>
> > +#include <usb.h>
> > +#include <usb/ehci-ci.h>
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +#define
> > ENET_PAD_CTRL
> > \
> > + (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |
> > PAD_CTL_DSE_40ohm | \
> > + PAD_CTL_HYS)
> > +
> > +#define
> > I2C_PAD_CTRL
> > \
> > + (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |
> > PAD_CTL_DSE_40ohm | \
> > + PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
> > +
> > +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
> > +
> > +static struct i2c_pads_info kp_imx6q_tpc_i2c_pad_info0 = {
> > + .scl = {
> > + .i2c_mode = MX6Q_PAD_CSI0_DAT9__I2C1_SCL | PC,
> > + .gpio_mode = MX6Q_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
> > + .gp = IMX_GPIO_NR(5, 27)
> > + },
> > + .sda = {
> > + .i2c_mode = MX6Q_PAD_CSI0_DAT8__I2C1_SDA | PC,
> > + .gpio_mode = MX6Q_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
> > + .gp = IMX_GPIO_NR(5, 26)
> > + }
> > +};
> > +
> > +static struct i2c_pads_info kp_imx6q_tpc_i2c_pad_info1 = {
> > + .scl = {
> > + .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
> > + .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
> > + .gp = IMX_GPIO_NR(4, 12)
> > + },
> > + .sda = {
> > + .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
> > + .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
> > + .gp = IMX_GPIO_NR(4, 13)
> > + }
> > +};
> > +
> > +int dram_init(void)
> > +{
> > + gd->ram_size = imx_ddr_size();
> > + return 0;
> > +}
> > +
> > +/*
> > + * Do not overwrite the console
> > + * Use always serial for U-Boot console
> > + */
> > +int overwrite_console(void)
> > +{
> > + return 1;
> > +}
> > +
> > +#ifdef CONFIG_FEC_MXC
> > +static iomux_v3_cfg_t const enet_pads[] = {
> > + IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_ENET_MDC__ENET_MDC |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
> > + MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 |
> > MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
> > + MUX_PAD_CTRL(ENET_PAD_CTRL)),
> > + /* AR8031 PHY Reset */
> > + IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 |
> > MUX_PAD_CTRL(NO_PAD_CTRL)), +};
> > +
> > +static void eth_phy_reset(void)
> > +{
> > + /* Reset AR8031 PHY */
> > + gpio_direction_output(IMX_GPIO_NR(1, 25), 0);
> > + mdelay(10);
> > + gpio_set_value(IMX_GPIO_NR(1, 25), 1);
> > + udelay(100);
> > +}
> > +
> > +static int setup_fec_clock(void)
> > +{
> > + struct iomuxc *iomuxc_regs = (struct iomuxc
> > *)IOMUXC_BASE_ADDR; +
> > + /* set gpr1[21] to select anatop clock */
> > + clrsetbits_le32(&iomuxc_regs->gpr[1], 0x1 << 21, 0x1 <<
> > 21); +
> > + return enable_fec_anatop_clock(0, ENET_50MHZ);
> > +}
> > +
> > +int board_eth_init(bd_t *bis)
> > +{
> > + SETUP_IOMUX_PADS(enet_pads);
> > + setup_fec_clock();
> > + eth_phy_reset();
> > +
> > + return cpu_eth_init(bis);
> > +}
> > +
> > +static int ar8031_phy_fixup(struct phy_device *phydev)
> > +{
> > + unsigned short val;
> > +
> > + /* To enable AR8031 output a 125MHz clk from CLK_25M */
> > + phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
> > + phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
> > + phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
> > +
> > + val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
> > + val &= 0xffe3;
> > + val |= 0x18;
> > + phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
> > +
> > + /* introduce tx clock delay */
> > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
> > + val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
> > + val |= 0x0100;
> > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
> > +
> > + return 0;
> > +}
> > +
> > +int board_phy_config(struct phy_device *phydev)
> > +{
> > + ar8031_phy_fixup(phydev);
> > +
> > + if (phydev->drv->config)
> > + phydev->drv->config(phydev);
> > +
> > + return 0;
> > +}
> > +#endif
> > +
> > +#ifdef CONFIG_FSL_ESDHC
> > +
> > +#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
> > +static struct fsl_esdhc_cfg usdhc_cfg[] = {
> > + { USDHC2_BASE_ADDR },
> > + { USDHC4_BASE_ADDR },
> > +};
> > +
> > +int board_mmc_getcd(struct mmc *mmc)
> > +{
> > + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg
> > *)mmc->priv; +
> > + switch (cfg->esdhc_base) {
> > + case USDHC2_BASE_ADDR:
> > + return !gpio_get_value(USDHC2_CD_GPIO);
> > + case USDHC4_BASE_ADDR:
> > + return 1; /* eMMC/uSDHC4 is always present */
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int board_mmc_init(bd_t *bis)
> > +{
> > + int i, ret;
> > +
> > + /*
> > + * According to the board_mmc_init() the following map is
> > done:
> > + * (U-Boot device node) (Physical Port)
> > + * mmc0 micro SD
> > + * mmc2 eMMC
> > + */
> > + gpio_direction_input(USDHC2_CD_GPIO);
> > +
> > + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
> > + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
> > +
> > + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
> > + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +#endif
> > +
> > +#ifdef CONFIG_USB_EHCI_MX6
> > +static void setup_usb(void)
> > +{
> > + /*
> > + * Set daisy chain for otg_pin_id on MX6Q.
> > + * For MX6DL, this bit is reserved.
> > + */
> > + imx_iomux_set_gpr_register(1, 13, 1, 0);
> > +}
> > +
> > +int board_usb_phy_mode(int port)
> > +{
> > + if (port == 1)
> > + return USB_INIT_HOST;
> > + else
> > + return USB_INIT_DEVICE;
> > +}
> > +
> > +int board_ehci_power(int port, int on)
> > +{
> > + switch (port) {
> > + case 0:
> > + break;
> > + case 1:
> > + gpio_direction_output(IMX_GPIO_NR(3, 31), !!on);
> > + break;
> > + default:
> > + printf("MXC USB port %d not yet supported\n",
> > port);
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +#endif
> > +
> > +int board_early_init_f(void)
> > +{
> > +#ifdef CONFIG_USB_EHCI_MX6
> > + setup_usb();
> > +#endif
> > +
> > + return 0;
> > +}
> > +
> > +int board_init(void)
> > +{
> > + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg
> > *)CCM_BASE_ADDR; +
> > + /* address of boot parameters */
> > + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
> > +
> > + /* Enable eim_slow clocks */
> > + setbits_le32(&mxc_ccm->CCGR6, 0x1 <<
> > MXC_CCM_CCGR6_EMI_SLOW_OFFSET); +
> > + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f,
> > &kp_imx6q_tpc_i2c_pad_info0);
> > + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f,
> > &kp_imx6q_tpc_i2c_pad_info1); +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_CMD_BMODE
> > +static const struct boot_mode board_boot_modes[] = {
> > + /* 4 bit bus width */
> > + {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
> > + /* 8 bit bus width */
> > + {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
> > + {NULL, 0},
> > +};
> > +#endif
> > +
> > +int board_late_init(void)
> > +{
> > +#ifdef CONFIG_CMD_BMODE
> > + add_board_boot_modes(board_boot_modes);
> > +#endif
> > +
> > + env_set("boardname", "kp-tpc");
> > + env_set("boardsoc", "imx6q");
> > + return 0;
> > +}
> > +
> > +int checkboard(void)
> > +{
> > + puts("Board: K+P KP_IMX6Q_TPC i.MX6Q\n");
> > + return 0;
> > +}
> > diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
> > b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c new file mode 100644
> > index 0000000000..b5723b41c1
> > --- /dev/null
> > +++ b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
> > @@ -0,0 +1,283 @@
> > +/*
> > + * K+P iMX6Q KP_IMX6Q_TPC board configuration
> > + *
> > + * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +
> > +#include <common.h>
> > +#include <asm/arch/clock.h>
> > +#include <asm/arch/crm_regs.h>
> > +#include <asm/arch/imx-regs.h>
> > +#include <asm/arch/iomux.h>
> > +#include <asm/arch/mx6-ddr.h>
> > +#include <asm/arch/mx6-pins.h>
> > +#include <asm/arch/sys_proto.h>
> > +#include <asm/gpio.h>
> > +#include <asm/mach-imx/boot_mode.h>
> > +#include <asm/mach-imx/iomux-v3.h>
> > +#include <asm/mach-imx/mxc_i2c.h>
> > +#include <asm/io.h>
> > +#include <errno.h>
> > +#include <fuse.h>
> > +#include <fsl_esdhc.h>
> > +#include <i2c.h>
> > +#include <mmc.h>
> > +#include <spl.h>
> > +
> > +#define
> > UART_PAD_CTRL
> > \
> > + (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |
> > PAD_CTL_DSE_40ohm | \
> > + PAD_CTL_SRE_FAST | PAD_CTL_HYS)
> > +
> > +#define
> > USDHC_PAD_CTRL
> > \
> > + (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |
> > PAD_CTL_DSE_80ohm | \
> > + PAD_CTL_SRE_FAST | PAD_CTL_HYS)
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +static void ccgr_init(void)
> > +{
> > + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg
> > *)CCM_BASE_ADDR; +
> > + writel(0x00C03F3F, &ccm->CCGR0);
> > + writel(0x0030FC03, &ccm->CCGR1);
> > + writel(0x0FFFC000, &ccm->CCGR2);
> > + writel(0x3FF00000, &ccm->CCGR3);
> > + writel(0x00FFF300, &ccm->CCGR4);
> > + writel(0x0F0000C3, &ccm->CCGR5);
> > + writel(0x000003FF, &ccm->CCGR6);
> > +}
> > +
> > +/* onboard microSD */
> > +static iomux_v3_cfg_t const usdhc2_pads[] = {
> > + IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD2_CLK__SD2_CLK |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD2_CMD__SD2_CMD |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16 |
> > MUX_PAD_CTRL(NO_PAD_CTRL)), +};
> > +
> > +/* eMMC */
> > +static iomux_v3_cfg_t const usdhc4_pads[] = {
> > + IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_CLK__SD4_CLK |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD4_CMD__SD4_CMD |
> > MUX_PAD_CTRL(USDHC_PAD_CTRL)), +};
> > +
> > +/* SD */
> > +static void setup_iomux_sd(void)
> > +{
> > + SETUP_IOMUX_PADS(usdhc2_pads);
> > + SETUP_IOMUX_PADS(usdhc4_pads);
> > +}
> > +
> > +/* UART */
> > +static iomux_v3_cfg_t const uart1_pads[] = {
> > + IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA |
> > MUX_PAD_CTRL(UART_PAD_CTRL)),
> > + IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA |
> > MUX_PAD_CTRL(UART_PAD_CTRL)), +};
> > +
> > +static void setup_iomux_uart(void)
> > +{
> > + SETUP_IOMUX_PADS(uart1_pads);
> > +}
> > +
> > +/* USB */
> > +static iomux_v3_cfg_t const usb_pads[] = {
> > + IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID |
> > MUX_PAD_CTRL(NO_PAD_CTRL)),
> > + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 |
> > MUX_PAD_CTRL(NO_PAD_CTRL)), +};
> > +
> > +static void setup_iomux_usb(void)
> > +{
> > + SETUP_IOMUX_PADS(usb_pads);
> > +}
> > +
> > +/*
> > + * This code has been extracted from mx6q_8x_mt41K256.cfg DCD
> > + * NXP's BSP u-boot mx6q_8x_mt41K256.cfg rel_imx_4.1.15_2.1.0_ga
> > + */
> > +static int mx6q_dcd_table[] = {
> > + 0x020e0798, 0x000C0000,
> > + 0x020e0758, 0x00000000,
>
> Well.....
>
> This is a Quad, well supported, we have a nice framework to setup the
> DDR. I do not like to see this dump of table in code. Which is the
> added value compared to the DCD table using the i.MX header ?
If I may explain, why I decided to use DCD table from the outset :-).
1. This board is based on sabresd port. It uses the same approach as
presented here:
board/freescale/mxsabresd/mxsabresd.c [1]
2. This board's old BSP uses identical DCD code - in that way I do
avoid problems with DDR3 debugging and instability issues.
>
> > + 0x020e0588, 0x00000030,
> > + 0x020e0594, 0x00000030,
> > + 0x020e056c, 0x00000030,
> > + 0x020e0578, 0x00000030,
> > + 0x020e074c, 0x00000030,
> > + 0x020e057c, 0x00000030,
> > + 0x020e058c, 0x00000000,
> > + 0x020e059c, 0x00000030,
> > + 0x020e05a0, 0x00000030,
> > + 0x020e078c, 0x00000030,
>
> There are structure and function to set these.
>
> > + 0x020e0750, 0x00020000,
> > + 0x020e05a8, 0x00000018,
> > + 0x020e05b0, 0x00000018,
> > + 0x020e0524, 0x00000018,
> > + 0x020e051c, 0x00000018,
> > + 0x020e0518, 0x00000018,
> > + 0x020e050c, 0x00000018,
> > + 0x020e05b8, 0x00000018,
> > + 0x020e05c0, 0x00000018,
> > + 0x020e0774, 0x00020000,
> > + 0x020e0784, 0x00000018,
> > + 0x020e0788, 0x00000018,
> > + 0x020e0794, 0x00000018,
> > + 0x020e079c, 0x00000018,
> > + 0x020e07a0, 0x00000018,
> > + 0x020e07a4, 0x00000018,
> > + 0x020e07a8, 0x00000018,
> > + 0x020e0748, 0x00000018,
> > + 0x020e05ac, 0x00000018,
> > + 0x020e05b4, 0x00000018,
> > + 0x020e0528, 0x00000018,
> > + 0x020e0520, 0x00000018,
> > + 0x020e0514, 0x00000018,
> > + 0x020e0510, 0x00000018,
> > + 0x020e05bc, 0x00000018,
> > + 0x020e05c4, 0x00000018,
> > + 0x021b0800, 0xa1390003,
> > + 0x021b080c, 0x001F001F,
> > + 0x021b0810, 0x001F001F,
> > + 0x021b480c, 0x001F001F,
> > + 0x021b4810, 0x001F001F,
> > + 0x021b083c, 0x43270338,
> > + 0x021b0840, 0x03200314,
> > + 0x021b483c, 0x431A032F,
> > + 0x021b4840, 0x03200263,
> > + 0x021b0848, 0x4B434748,
> > + 0x021b4848, 0x4445404C,
> > + 0x021b0850, 0x38444542,
> > + 0x021b4850, 0x4935493A,
> > + 0x021b081c, 0x33333333,
> > + 0x021b0820, 0x33333333,
> > + 0x021b0824, 0x33333333,
> > + 0x021b0828, 0x33333333,
> > + 0x021b481c, 0x33333333,
> > + 0x021b4820, 0x33333333,
> > + 0x021b4824, 0x33333333,
> > + 0x021b4828, 0x33333333,
>
> Like calibration and so on. Please change this as done by other board,
> using structures ( mx6_ddr3_cfg, mx6dq_iomux_grp_regs) and calling
> mx6dq_dram_iocfg() and mx6_dram_cfg() - thanks !
Yes. I do know that API.
In v2. I will try to convert this board to use it.
>
> > + 0x021b08b8, 0x00000800,
> > + 0x021b48b8, 0x00000800,
> > + 0x021b0004, 0x00020036,
> > + 0x021b0008, 0x09444040,
> > + 0x021b000c, 0x8A8F7955,
> > + 0x021b0010, 0xFF328F64,
> > + 0x021b0014, 0x01FF00DB,
> > + 0x021b0018, 0x00001740,
> > + 0x021b001c, 0x00008000,
> > + 0x021b002c, 0x000026d2,
> > + 0x021b0030, 0x008F1023,
> > + 0x021b0040, 0x00000047,
> > + 0x021b0000, 0x841A0000,
> > + 0x021b001c, 0x04088032,
> > + 0x021b001c, 0x00008033,
> > + 0x021b001c, 0x00048031,
> > + 0x021b001c, 0x09408030,
> > + 0x021b001c, 0x04008040,
> > + 0x021b0020, 0x00005800,
> > + 0x021b0818, 0x00011117,
> > + 0x021b4818, 0x00011117,
> > + 0x021b0004, 0x00025576,
> > + 0x021b0404, 0x00011006,
> > + 0x021b001c, 0x00000000,
> > +};
> > +
> > +static void ddr_init(int *table, int size)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < size / 2 ; i++)
> > + writel(table[2 * i + 1], table[2 * i]);
>
> Quite nasty....
As in [1]...
>
> > +}
> > +
> > +struct fsl_esdhc_cfg usdhc_cfg[] = {
> > + {USDHC2_BASE_ADDR},
> > + {USDHC4_BASE_ADDR},
> > +};
> > +
> > +#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
> > +int board_mmc_getcd(struct mmc *mmc)
> > +{
> > + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg
> > *)mmc->priv;
> > + int ret = 0;
> > +
> > + switch (cfg->esdhc_base) {
> > + case USDHC2_BASE_ADDR:
> > + ret = !gpio_get_value(USDHC2_CD_GPIO);
> > + break;
> > + case USDHC4_BASE_ADDR:
> > + ret = 1; /* eMMC/uSDHC4 is always present */
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +int board_mmc_init(bd_t *bd)
> > +{
> > + struct src *psrc = (struct src *)SRC_BASE_ADDR;
> > + unsigned int reg = readl(&psrc->sbmr1) >> 11;
> > + /*
> > + * Upon reading BOOT_CFG register the following map is
> > done:
> > + * Bit 11 and 12 of BOOT_CFG register can determine the
> > current
> > + * mmc port
> > + * 0x1 SD1
> > + * 0x3 SD4
> > + */
> > +
> > + switch (reg & 0x3) {
> > + case 0x1:
> > + SETUP_IOMUX_PADS(usdhc2_pads);
> > + usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
> > + usdhc_cfg[0].sdhc_clk =
> > mxc_get_clock(MXC_ESDHC2_CLK);
> > + gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
> > + break;
> > + case 0x3:
> > + SETUP_IOMUX_PADS(usdhc4_pads);
> > + usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
> > + usdhc_cfg[0].sdhc_clk =
> > mxc_get_clock(MXC_ESDHC4_CLK);
> > + gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
> > + break;
> > + }
> > +
> > + return fsl_esdhc_initialize(bd, &usdhc_cfg[0]);
> > +}
> > +
> > +void board_init_f(ulong dummy)
> > +{
> > + /* Setup DDR3 from NXP's BSP DCD file */
> > + ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
> > +
> > + /* setup AIPS and disable watchdog */
> > + arch_cpu_init();
> > +
> > + ccgr_init();
> > + gpr_init();
> > +
> > + /* setup GP timer */
> > + timer_init();
> > +
> > + setup_iomux_sd();
> > + setup_iomux_uart();
> > + setup_iomux_usb();
> > +
> > + /* UART clocks enabled and gd valid - init serial console
> > */
> > + preloader_console_init();
> > +
> > + /* Clear the BSS. */
> > + memset(__bss_start, 0, __bss_end - __bss_start);
> > +
> > + /* load/boot image from boot device */
> > + board_init_r(NULL, 0);
> > +}
> > diff --git a/configs/kp_imx6q_tpc_defconfig
> > b/configs/kp_imx6q_tpc_defconfig new file mode 100644
> > index 0000000000..d2c6e2e6ba
> > --- /dev/null
> > +++ b/configs/kp_imx6q_tpc_defconfig
> > @@ -0,0 +1,42 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_MX6=y
> > +CONFIG_SYS_TEXT_BASE=0x17800000
> > +CONFIG_SPL_GPIO_SUPPORT=y
> > +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> > +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > +CONFIG_MX6_DDRCAL=y
> > +CONFIG_TARGET_KP_IMX6Q_TPC=y
> > +CONFIG_SPL_MMC_SUPPORT=y
> > +CONFIG_SPL_SERIAL_SUPPORT=y
> > +CONFIG_SPL_WATCHDOG_SUPPORT=y
> > +CONFIG_DISTRO_DEFAULTS=y
> > +CONFIG_FIT=y
> > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
> > +CONFIG_BOOTDELAY=3
> > +# CONFIG_USE_BOOTCOMMAND is not set
> > +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
> > +CONFIG_SPL=y
> > +CONFIG_SPL_RAW_IMAGE_SUPPORT=y
> > +CONFIG_AUTOBOOT_KEYED=y
> > +CONFIG_AUTOBOOT_STOP_STR="."
> > +# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
> > +# CONFIG_CMD_ELF is not set
> > +# CONFIG_CMD_FLASH is not set
> > +CONFIG_CMD_GPIO=y
> > +CONFIG_CMD_I2C=y
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_USB=y
> > +CONFIG_CMD_CACHE=y
> > +CONFIG_CMD_TIME=y
> > +CONFIG_CMD_EXT4_WRITE=y
> > +# CONFIG_ISO_PARTITION is not set
> > +# CONFIG_EFI_PARTITION is not set
> > +CONFIG_ENV_IS_IN_MMC=y
> > +CONFIG_PHYLIB=y
> > +CONFIG_PHY_ATHEROS=y
> > +CONFIG_NETDEVICES=y
> > +CONFIG_FEC_MXC=y
> > +CONFIG_IMX_THERMAL=y
> > +CONFIG_USB=y
> > +CONFIG_USB_STORAGE=y
> > +CONFIG_OF_LIBFDT=y
> > diff --git a/include/configs/kp_imx6q_tpc.h
> > b/include/configs/kp_imx6q_tpc.h new file mode 100644
> > index 0000000000..74143a2dba
> > --- /dev/null
> > +++ b/include/configs/kp_imx6q_tpc.h
> > @@ -0,0 +1,128 @@
> > +/*
> > + * K+P iMX6Q KP_IMX6Q_TPC board configuration
> > + *
> > + * Copyright (C) 2018 Lukasz Majewski <lukma@denx.de>
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +
> > +#ifndef __KP_IMX6Q_TPC_IMX6_CONFIG_H_
> > +#define __KP_IMX6Q_TPC_IMX6_CONFIG_H_
> > +
> > +#include <asm/arch/imx-regs.h>
> > +
> > +#include "mx6_common.h"
> > +
> > +/* SPL */
> > +#include "imx6_spl.h" /* common IMX6 SPL
> > configuration */ +
> > +/* Miscellaneous configurable options */
> > +#define CONFIG_CMDLINE_TAG
> > +#define CONFIG_SETUP_MEMORY_TAGS
> > +#define CONFIG_INITRD_TAG
> > +#define CONFIG_REVISION_TAG
> > +
> > +#define CONFIG_BOUNCE_BUFFER
> > +
> > +/* Size of malloc() pool */
> > +#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
> > +
> > +/* FEC ethernet */
> > +#define CONFIG_MII
> > +#define IMX_FEC_BASE ENET_BASE_ADDR
> > +#define CONFIG_FEC_XCV_TYPE RGMII
> > +#define CONFIG_ETHPRIME "FEC"
> > +#define CONFIG_FEC_MXC_PHYADDR 0
> > +#define CONFIG_ARP_TIMEOUT 200UL
> > +
> > +/* Fuses */
> > +#ifdef CONFIG_CMD_FUSE
> > +#define CONFIG_MXC_OCOTP
> > +#endif
> > +
> > +/* I2C Configs */
> > +#define CONFIG_SYS_I2C
> > +#define CONFIG_SYS_I2C_MXC
> > +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1
> > */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C
> > bus 2 */ +#define CONFIG_SYS_I2C_SPEED 100000
> > +
> > +/* MMC Configs */
> > +#define CONFIG_FSL_ESDHC
> > +#define CONFIG_FSL_USDHC
> > +#define CONFIG_SYS_FSL_ESDHC_ADDR 0
> > +#define CONFIG_SYS_FSL_USDHC_NUM 2
> > +#define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 =
> > SDHC4 (eMMC) */ +
> > +/* UART */
> > +#define CONFIG_MXC_UART
> > +#define CONFIG_MXC_UART_BASE UART1_BASE
> > +#define CONFIG_CONS_INDEX 1
> > +#define CONFIG_BAUDRATE 115200
> > +
> > +/* USB Configs */
> > +#ifdef CONFIG_CMD_USB
> > +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> > +#define CONFIG_USB_HOST_ETHER
> > +#define CONFIG_USB_ETHER_ASIX
> > +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI |
> > PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0
> > +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB
> > controller number */ +#endif
> > +
> > +/* Watchdog */
> > +#define CONFIG_HW_WATCHDOG
> > +#define CONFIG_IMX_WATCHDOG
> > +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
> > +
> > +/* allow to overwrite serial and ethaddr */
> > +#define CONFIG_ENV_OVERWRITE
> > +
> > +#define CONFIG_LOADADDR 0x12000000
> > +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> > +
> > +#ifndef CONFIG_SPL_BUILD
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > + "console=ttymxc0,115200\0" \
> > + "fdt_addr=0x18000000\0" \
> > + "fdt_high=0xffffffff\0" \
> > + "initrd_high=0xffffffff\0" \
> > + "kernel_addr_r=0x10008000\0" \
> > + "fdt_addr_r=0x13000000\0" \
> > + "ramdisk_addr_r=0x18000000\0" \
> > + "scriptaddr=0x14000000\0" \
> > + "kernel_file=fitImage\0"\
> > + BOOTENV
> > +
> > +#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
> > +
> > +#define BOOT_TARGET_DEVICES(func) \
> > + func(MMC, mmc, 0) \
> > + func(MMC, mmc, 1) \
> > + func(USB, usb, 0) \
> > + func(DHCP, dhcp, na)
> > +
> > +#include <config_distro_bootcmd.h>
> > +#endif
> > +
> > +/* Physical Memory Map */
> > +#define CONFIG_NR_DRAM_BANKS 1
> > +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
> > +
> > +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
> > +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
> > +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
> > +
> > +#define CONFIG_SYS_INIT_SP_OFFSET \
> > + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> > +
> > +#define CONFIG_SYS_INIT_SP_ADDR \
> > + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> > +
> > +/* Environment */
> > +#define CONFIG_ENV_SIZE (SZ_8K)
> > +#define CONFIG_ENV_OFFSET 0x100000
> > +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET +
> > CONFIG_ENV_SIZE) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
> > +
> > +#endif /* __KP_IMX6Q_TPC_IMX6_CONFIG_H_ */
> >
>
> Best regards,
> Stefano Babic
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180329/ad970c84/attachment.sig>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-03-29 16:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-14 10:07 [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Lukasz Majewski
2018-03-14 10:07 ` [U-Boot] [PATCH v1 2/2] boot: script: The boot.scr file for K+P's boards Lukasz Majewski
2018-03-29 16:10 ` Stefano Babic
2018-03-29 16:10 ` [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Stefano Babic
2018-03-29 16:43 ` Lukasz Majewski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox