[U-Boot] Pull request: u-boot-sunxi/master

[Jagan Teki <jagan@amarulasolutions.com>]

Hi Tom,

Please pull this PR, these changes were there since from last release.

thanks,
Jagan.

The following changes since commit 0354f4bef0f1ff1e160673794577ca00b23f3f1a:

  sunxi: Add DRAM_SUN8I_A83T kconfig entry (2018-03-19 16:46:47 +0530)

are available in the Git repository at:

  git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to f3fed05e095439b3fd24990e20dbea1d4b03c121:

  Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT" (2018-04-04 14:15:40 +0530)

----------------------------------------------------------------
Andre Przywara (11):
      sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware
      sunxi: gpio: add missing compatible strings
      net: sun8i-emac: support new pinctrl DT bindings
      net: sun8i-emac: add support for new EMAC DT binding
      arm: dts: sunxi: update A64 to new EMAC binding
      arm: dts: sunxi: update H3 to new EMAC binding
      arm: dts: sunxi: update H5 to new EMAC binding
      net: sun8i-emac: remove support for old binding
      sunxi: disable direct MMC environment
      sunxi: revert disabling of features
      Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT"

Miquel Raynal (20):
      spl: fix binman_sym output check
      mtd: nand: sunxi: fix ECC strength choice
      spl: nand: sunxi: fix second case of modulo by zero error
      spl: nand: sunxi: fix typo on register name
      spl: nand: sunxi: introduce the nand_wait_int() helper
      spl: nand: sunxi: introduce the nand_wait_cmd_fifo_empty() helper
      spl: nand: sunxi: add missing status clear
      spl: nand: sunxi: create an helper to handle command execution
      spl: nand: sunxi: ensure enough time has passed after changing the column
      spl: nand: sunxi: make the reset column helper more generic
      sunxi: spl: deassert the NAND controller reset line
      spl: nand: sunxi: declare the ecc_bytes array globally
      spl: nand: sunxi: use PIO instead of DMA
      sunxi: spl: remove DMA related settings of the NAND controller
      sunxi: allow NAND support to be compiled for sun8i platforms
      sunxi: dts: enable NAND on NES classic
      sunxi: automatically select SPL_NAND_SUPPORT in Kconfig
      sunxi: make NAND_SUNXI use ARCH_SUNXI as default in Kconfig
      sunxi: move the NAND parameters to Kconfig
      configs: add NAND support for NES Classic

 arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi    |  51 +++--
 arch/arm/dts/sun50i-h5-orangepi-pc2.dts            |   7 +-
 arch/arm/dts/sun8i-a23-a33.dtsi                    |  17 ++
 arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts       |   6 +-
 arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts      |   7 +-
 arch/arm/dts/sun8i-h3-nanopi-neo.dts               |   6 +-
 arch/arm/dts/sun8i-h3-orangepi-2.dts               |   7 +-
 arch/arm/dts/sun8i-h3-orangepi-one.dts             |   7 +-
 arch/arm/dts/sun8i-h3-orangepi-pc.dts              |   7 +-
 arch/arm/dts/sun8i-h3-orangepi-plus.dts            |   8 +-
 arch/arm/dts/sun8i-h3-orangepi-plus2e.dts          |   9 +-
 arch/arm/dts/sun8i-h3.dtsi                         |  69 ++++--
 .../dts/sun8i-r16-nintendo-nes-classic-edition.dts |  14 ++
 arch/arm/include/asm/arch-sunxi/clock_sun6i.h      |   6 +
 board/sunxi/README.sunxi64                         |   6 +
 board/sunxi/board.c                                |   7 +-
 cmd/Kconfig                                        |   5 -
 common/spl/spl.c                                   |  10 +-
 configs/CHIP_pro_defconfig                         |   6 +-
 configs/Nintendo_NES_Classic_Edition_defconfig     |   4 +
 configs/pine64_plus_defconfig                      |   1 +
 drivers/gpio/sunxi_gpio.c                          |   3 +
 drivers/mtd/nand/Kconfig                           |  26 ++-
 drivers/mtd/nand/sunxi_nand.c                      |   8 +-
 drivers/mtd/nand/sunxi_nand_spl.c                  | 236 ++++++++++-----------
 drivers/net/sun8i_emac.c                           |  89 +++++---
 drivers/video/Kconfig                              |   2 -
 env/Kconfig                                        |   1 -
 lib/Kconfig                                        |   1 -
 29 files changed, 390 insertions(+), 236 deletions(-)