[U-Boot] [Feature] Android Fastboot over Ethernet

[Lukasz Majewski <lukma@denx.de>]

Hi Stanislas,

> Has there been any development to support Android Fastboot Ethernet
> feature in U-Boot ?
> 
> https://android.googlesource.com/platform/system/core/+/android-7.1.2_r36/fastboot/fastboot_protocol.txt
> 
> 
> The target board has not USB device port available to flash the
> on-board eMMC.

I'm not aware of any such effort.

However, if you want to flash eMMC via ETH, then maybe you can look
into DFU TFTP feature.

Please read: ./doc/README.dfutftp

> 
> Flashing the eMMC via U-Boot shell commands would be very much slower
> and limited.
> 
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180404/6dcd8d53/attachment.sig>