From: Ivan Gorinov <ivan.gorinov@intel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] x86: Use microcode update from device tree for all processors
Date: Wed, 4 Apr 2018 16:07:00 -0700 [thread overview]
Message-ID: <20180404230700.GA57192@intel.com> (raw)
The microcode update data block encoded in Device Tree is used by
the bootstrap processor (BSP) but not passed to the other CPUs (AP).
If the bootstrap processor successfully performs a microcode update
from Device Tree, use the same data block for the other processors.
Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
---
arch/x86/cpu/i386/cpu.c | 3 ++-
arch/x86/cpu/intel_common/car.S | 2 ++
arch/x86/cpu/intel_common/microcode.c | 10 +++++++---
arch/x86/include/asm/microcode.h | 1 +
arch/x86/lib/fsp/fsp_car.S | 2 ++
5 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c
index aabdc94..05d8312 100644
--- a/arch/x86/cpu/i386/cpu.c
+++ b/arch/x86/cpu/i386/cpu.c
@@ -26,6 +26,7 @@
#include <asm/mp.h>
#include <asm/msr.h>
#include <asm/mtrr.h>
+#include <asm/microcode.h>
#include <asm/processor-flags.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -586,7 +587,7 @@ int x86_mp_init(void)
mp_params.parallel_microcode_load = 0,
mp_params.flight_plan = &mp_steps[0];
mp_params.num_records = ARRAY_SIZE(mp_steps);
- mp_params.microcode_pointer = 0;
+ mp_params.microcode_pointer = (void *)ucode_base;
if (mp_init(&mp_params)) {
printf("Warning: MP init failure\n");
diff --git a/arch/x86/cpu/intel_common/car.S b/arch/x86/cpu/intel_common/car.S
index 6e0db96..099bf28 100644
--- a/arch/x86/cpu/intel_common/car.S
+++ b/arch/x86/cpu/intel_common/car.S
@@ -240,4 +240,6 @@ _dt_ucode_base_size:
.globl ucode_base
ucode_base: /* Declared in microcode.h */
.long 0 /* microcode base */
+.globl ucode_size
+ucode_size: /* Declared in microcode.h */
.long 0 /* microcode size */
diff --git a/arch/x86/cpu/intel_common/microcode.c b/arch/x86/cpu/intel_common/microcode.c
index 8813258..9321ae1 100644
--- a/arch/x86/cpu/intel_common/microcode.c
+++ b/arch/x86/cpu/intel_common/microcode.c
@@ -44,8 +44,6 @@ static int microcode_decode_node(const void *blob, int node,
update->data = fdt_getprop(blob, node, "data", &update->size);
if (!update->data)
return -ENOENT;
- update->data += UCODE_HEADER_LEN;
- update->size -= UCODE_HEADER_LEN;
update->header_version = fdtdec_get_int(blob, node,
"intel,header-version", 0);
@@ -125,6 +123,7 @@ static void microcode_read_cpu(struct microcode_update *cpu)
int microcode_update_intel(void)
{
struct microcode_update cpu, update;
+ ulong address;
const void *blob = gd->fdt_blob;
int skipped;
int count;
@@ -168,7 +167,8 @@ int microcode_update_intel(void)
skipped++;
continue;
}
- wrmsr(MSR_IA32_UCODE_WRITE, (ulong)update.data, 0);
+ address = (ulong)update.data + UCODE_HEADER_LEN;
+ wrmsr(MSR_IA32_UCODE_WRITE, address, 0);
rev = microcode_read_rev();
debug("microcode: updated to revision 0x%x date=%04x-%02x-%02x\n",
rev, update.date_code & 0xffff,
@@ -179,5 +179,9 @@ int microcode_update_intel(void)
return -EFAULT;
}
count++;
+ if (!ucode_base) {
+ ucode_base = (ulong)update.data;
+ ucode_size = update.size;
+ }
} while (1);
}
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 29bf060..b30b8b6 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -11,6 +11,7 @@
/* This is a declaration for ucode_base in start.S */
extern u32 ucode_base;
+extern u32 ucode_size;
/**
* microcode_update_intel() - Apply microcode updates
diff --git a/arch/x86/lib/fsp/fsp_car.S b/arch/x86/lib/fsp/fsp_car.S
index fbe8aef..157600a 100644
--- a/arch/x86/lib/fsp/fsp_car.S
+++ b/arch/x86/lib/fsp/fsp_car.S
@@ -105,6 +105,8 @@ _dt_ucode_base_size:
.globl ucode_base
ucode_base: /* Declared in micrcode.h */
.long 0 /* microcode base */
+.globl ucode_size
+ucode_size: /* Declared in micrcode.h */
.long 0 /* microcode size */
.long CONFIG_SYS_MONITOR_BASE /* code region base */
.long CONFIG_SYS_MONITOR_LEN /* code region size */
--
2.7.4
next reply other threads:[~2018-04-04 23:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-04 23:07 Ivan Gorinov [this message]
2018-04-05 11:07 ` [U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Andy Shevchenko
2018-04-05 15:31 ` Bin Meng
2018-04-17 18:29 ` Ivan Gorinov
2018-04-18 12:48 ` Bin Meng
2018-04-19 0:11 ` Ivan Gorinov
2018-04-19 1:05 ` Bin Meng
2018-04-20 17:47 ` Ivan Gorinov
2018-06-12 2:05 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180404230700.GA57192@intel.com \
--to=ivan.gorinov@intel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox