[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC

[Gary Bisson <gary.bisson@boundarydevices.com>]

Hi Fabio, Guillaume

On Thu, Apr 12, 2018 at 08:14:51AM -0300, Fabio Estevam wrote:
> On Thu, Apr 12, 2018 at 5:13 AM, Guillaume Gardet
> <guillaume.gardet@free.fr> wrote:
> script that picks the correct dtb.
> >>
> > Ok. So, how would you like to proceed?
> > Remove the generic mx6 'soc' definition and use a board sepcific 'board_rev'
> > (or maybe a static definition if one configuration match a single dtb) to
> > define the right dtb?
> 
> I prefer to keep the same solution as done in other boards sucn as
> mx6sabresd, wandboard and cuboxi.

Ok. My suggestion was to have something generic so that it matches the
fdt name set in config_distro_bootcmd.h
(${soc}-${board}${boardver}.dtb).

I especially like the naming in that standard, don't think board_rev
should be the SOC name.

This would also avoid redundancy in each board_late_init functions since
only the board name would need to be setup (and boardver in some cases
like wandboard).

Guillaume, please forget that point for now and just set your fdtfile
name in the config file. I'll update the board file later on.

Regards,
Gary