[U-Boot] [PATCH v2 5/5] configs: Bananapi_M2_Ultra: enable gigabit on the Bananapi M2U

[Lothar Felten <lothar.felten@gmail.com>]

Enable the gigabit ethernet for the Bananapi M2 Ultra board.
Tested on BananaPi M2 Berry (R40), custom board (V40).

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
---
 arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts | 14 ++++++++++++++
 configs/Bananapi_M2_Ultra_defconfig          |  4 ++++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
index ab471ab0bf..25f2112fbf 100644
--- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -67,3 +67,17 @@
 	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii>;
+	status = "okay";
+	phy-handle = <&rgmii_phy>;
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy at 1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
index 37cc2df5dc..e4e943dc49 100644
--- a/configs/Bananapi_M2_Ultra_defconfig
+++ b/configs/Bananapi_M2_Ultra_defconfig
@@ -17,3 +17,7 @@ CONFIG_AXP_DLDO4_VOLT=2500
 CONFIG_AXP_ELDO3_VOLT=1200
 CONFIG_SCSI=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+CONFIG_SUN8I_EMAC=y
+CONFIG_RGMII=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_MACPWR="PA17"
-- 
2.14.1