From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ramon Fried Date: Sat, 12 May 2018 13:15:52 +0300 Subject: [U-Boot] [PATCH 1/7] db820c: set clk node to be probed before relocation In-Reply-To: <20180512101558.24375-1-ramon.fried@gmail.com> References: <20180512101558.24375-1-ramon.fried@gmail.com> Message-ID: <20180512101558.24375-2-ramon.fried@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The clock and serial nodes are needed before relocation. This patch ensures that the msm-serial driver will probe and provide uart output before relocation. Signed-off-by: Ramon Fried --- arch/arm/dts/dragonboard820c-uboot.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/dts/dragonboard820c-uboot.dtsi b/arch/arm/dts/dragonboard820c-uboot.dtsi index 88312b3fa1..81df788fca 100644 --- a/arch/arm/dts/dragonboard820c-uboot.dtsi +++ b/arch/arm/dts/dragonboard820c-uboot.dtsi @@ -5,6 +5,20 @@ * (C) Copyright 2017 Jorge Ramirez-Ortiz */ +/ { + soc { + u-boot,dm-pre-reloc; + + clock-controller at 300000 { + u-boot,dm-pre-reloc; + }; + + serial at 75b0000 { + u-boot,dm-pre-reloc; + }; + }; +}; + &pm8994_pon { key_vol_down { gpios = <&pm8994_pon 1 0>; -- 2.14.1