From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Lechner Date: Sat, 19 May 2018 23:25:04 -0500 Subject: [U-Boot] [PATCH 2/5] ARM: legoev3: Move UART enable to early init In-Reply-To: <20180520042507.22058-1-david@lechnology.com> References: <20180520042507.22058-1-david@lechnology.com> Message-ID: <20180520042507.22058-3-david@lechnology.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This moves the UART init for LEGO MINDSTORMS EV3 to board_early_init_f(). Some console messages were not being printed because the UART was not enabled until later in the init process. Signed-off-by: David Lechner --- board/lego/ev3/legoev3.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/board/lego/ev3/legoev3.c b/board/lego/ev3/legoev3.c index 5e70363588..69010055d3 100644 --- a/board/lego/ev3/legoev3.c +++ b/board/lego/ev3/legoev3.c @@ -132,6 +132,11 @@ void get_board_serial(struct tag_serialnr *serialnr) int board_early_init_f(void) { + /* enable the console UART */ + writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | + DAVINCI_UART_PWREMU_MGMT_UTRST), + &davinci_uart1_ctrl_regs->pwremu_mgmt); + /* * Power on required peripherals * ARM does not have access by default to PSC0 and PSC1 @@ -166,10 +171,5 @@ int board_init(void) if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) return 1; - /* enable the console UART */ - writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | - DAVINCI_UART_PWREMU_MGMT_UTRST), - &davinci_uart1_ctrl_regs->pwremu_mgmt); - return 0; } -- 2.17.0