From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Packham Date: Mon, 28 May 2018 21:00:04 +1200 Subject: [U-Boot] [PATCH 1/2] ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled Message-ID: <20180528090005.3183-1-judge.packham@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The mach/config.h file would helpfully define CONFIG_SYS_I2C and CONFIG_SYS_I2C_MVTWSI if CONFIG_CMD_I2C was defined by the board. This conflicts with the way DM_I2C works. As a transitional measure don't automatically define these if CONFIG_DM_I2C is defined. It should be possible to remove this once all kirkwood boards are migrated to DM. Signed-off-by: Chris Packham --- arch/arm/mach-kirkwood/include/mach/config.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index 98639114dbdd..3482944c11de 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -116,7 +116,7 @@ /* * I2C related stuff */ -#ifdef CONFIG_CMD_I2C +#if defined(CONFIG_CMD_I2C) && !defined(CONFIG_DM_I2C) #ifndef CONFIG_SYS_I2C_SOFT #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI -- 2.17.0