public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Vasily Khoruzhick <anarsoul@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 3/4] usb: sunxi: ohci: get rid of ifdefs
Date: Thu,  7 Jun 2018 19:23:40 -0700	[thread overview]
Message-ID: <20180608022341.27225-3-anarsoul@gmail.com> (raw)
In-Reply-To: <20180608022341.27225-1-anarsoul@gmail.com>

We can use compatibles instead.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
v3: use ohci_sunxi_cfg instead of id

 drivers/usb/host/ohci-sunxi.c | 83 ++++++++++++++++++++++++++---------
 1 file changed, 63 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
index ce2b47a5c4..19f99adcf1 100644
--- a/drivers/usb/host/ohci-sunxi.c
+++ b/drivers/usb/host/ohci-sunxi.c
@@ -22,12 +22,18 @@
 #define AHB_CLK_DIST		1
 #endif
 
+struct ohci_sunxi_cfg {
+	bool has_reset;
+	u32 extra_ahb_gate_mask;
+};
+
 struct ohci_sunxi_priv {
 	struct sunxi_ccm_reg *ccm;
 	ohci_t ohci;
 	int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
 	int usb_gate_mask; /* Mask of usb_clk_cfg clk gate bits for this hcd */
 	struct phy phy;
+	const struct ohci_sunxi_cfg *cfg;
 };
 
 static int ohci_usb_probe(struct udevice *dev)
@@ -38,6 +44,7 @@ static int ohci_usb_probe(struct udevice *dev)
 	int extra_ahb_gate_mask = 0;
 	int phys, ret;
 
+	priv->cfg = (const struct ohci_sunxi_cfg *)dev_get_driver_data(dev);
 	priv->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	if (IS_ERR(priv->ccm))
 		return PTR_ERR(priv->ccm);
@@ -74,9 +81,7 @@ no_phy:
 	 * clocks resp. phys.
 	 */
 	priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
-#ifdef CONFIG_MACH_SUN8I_H3
-	extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
-#endif
+	extra_ahb_gate_mask = priv->cfg->extra_ahb_gate_mask;
 	priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
 	priv->ahb_gate_mask <<= phys * AHB_CLK_DIST;
 	extra_ahb_gate_mask <<= phys * AHB_CLK_DIST;
@@ -85,10 +90,9 @@ no_phy:
 	setbits_le32(&priv->ccm->ahb_gate0,
 		     priv->ahb_gate_mask | extra_ahb_gate_mask);
 	setbits_le32(&priv->ccm->usb_clk_cfg, priv->usb_gate_mask);
-#ifdef CONFIG_SUNXI_GEN_SUN6I
-	setbits_le32(&priv->ccm->ahb_reset0_cfg,
-		     priv->ahb_gate_mask | extra_ahb_gate_mask);
-#endif
+	if (priv->cfg->has_reset)
+		setbits_le32(&priv->ccm->ahb_reset0_cfg,
+			     priv->ahb_gate_mask | extra_ahb_gate_mask);
 
 	return ohci_register(dev, regs);
 }
@@ -110,26 +114,65 @@ static int ohci_usb_remove(struct udevice *dev)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_SUNXI_GEN_SUN6I
-	clrbits_le32(&priv->ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
-#endif
+	if (priv->cfg->has_reset)
+		clrbits_le32(&priv->ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
 	clrbits_le32(&priv->ccm->usb_clk_cfg, priv->usb_gate_mask);
 	clrbits_le32(&priv->ccm->ahb_gate0, priv->ahb_gate_mask);
 
 	return 0;
 }
 
+static const struct ohci_sunxi_cfg sun4i_a10_cfg = {
+	.has_reset = false,
+};
+
+static const struct ohci_sunxi_cfg sun6i_a31_cfg = {
+	.has_reset = true,
+};
+
+static const struct ohci_sunxi_cfg sun8i_h3_cfg = {
+	.has_reset = true,
+	.extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
+};
+
 static const struct udevice_id ohci_usb_ids[] = {
-	{ .compatible = "allwinner,sun4i-a10-ohci", },
-	{ .compatible = "allwinner,sun5i-a13-ohci", },
-	{ .compatible = "allwinner,sun6i-a31-ohci", },
-	{ .compatible = "allwinner,sun7i-a20-ohci", },
-	{ .compatible = "allwinner,sun8i-a23-ohci", },
-	{ .compatible = "allwinner,sun8i-a83t-ohci", },
-	{ .compatible = "allwinner,sun8i-h3-ohci",  },
-	{ .compatible = "allwinner,sun9i-a80-ohci", },
-	{ .compatible = "allwinner,sun50i-a64-ohci", },
-	{ }
+	{
+		.compatible = "allwinner,sun4i-a10-ohci",
+		.data = (ulong)&sun4i_a10_cfg,
+	},
+	{
+		.compatible = "allwinner,sun5i-a13-ohci",
+		.data = (ulong)&sun4i_a10_cfg,
+	},
+	{
+		.compatible = "allwinner,sun6i-a31-ohci",
+		.data = (ulong)&sun6i_a31_cfg,
+	},
+	{
+		.compatible = "allwinner,sun7i-a20-ohci",
+		.data = (ulong)&sun4i_a10_cfg,
+	},
+	{
+		.compatible = "allwinner,sun8i-a23-ohci",
+		.data = (ulong)&sun6i_a31_cfg,
+	},
+	{
+		.compatible = "allwinner,sun8i-a83t-ohci",
+		.data = (ulong)&sun6i_a31_cfg,
+	},
+	{
+		.compatible = "allwinner,sun8i-h3-ohci",
+		.data = (ulong)&sun8i_h3_cfg,
+	},
+	{
+		.compatible = "allwinner,sun9i-a80-ohci",
+		.data = (ulong)&sun6i_a31_cfg,
+	},
+	{
+		.compatible = "allwinner,sun50i-a64-ohci",
+		.data = (ulong)&sun6i_a31_cfg,
+	},
+	{ /* sentinel */ }
 };
 
 U_BOOT_DRIVER(usb_ohci) = {
-- 
2.17.1

  parent reply	other threads:[~2018-06-08  2:23 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-08  2:23 [U-Boot] [PATCH v3 1/4] sunxi: clock: Fix EHCI and OHCI clocks on A64 Vasily Khoruzhick
2018-06-08  2:23 ` [U-Boot] [PATCH v3 2/4] usb: sunxi: ehci: get rid of ifdefs Vasily Khoruzhick
2018-06-08 14:24   ` Maxime Ripard
2018-06-08 15:24     ` Vasily Khoruzhick
2018-06-08 15:38       ` Maxime Ripard
2018-06-08  2:23 ` Vasily Khoruzhick [this message]
2018-06-08  2:23 ` [U-Boot] [PATCH v3 4/4] usb: sunxi: sun50i: enable OHCI0 clock when OHCI1 is in use Vasily Khoruzhick
2018-06-08  7:31 ` [U-Boot] [U-Boot, v3, 1/4] sunxi: clock: Fix EHCI and OHCI clocks on A64 Vagrant Cascadian
2018-06-13  4:51 ` [U-Boot] [PATCH v3 " Vasily Khoruzhick
2018-06-13  5:35 ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180608022341.27225-3-anarsoul@gmail.com \
    --to=anarsoul@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox