From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 00/32] i.MX: Add i.MX8QXP support
Date: Thu, 19 Jul 2018 16:28:36 +0200 [thread overview]
Message-ID: <20180719162836.7afed82a@crub> (raw)
In-Reply-To: <HE1PR04MB30045EC86979C54F157612EF88520@HE1PR04MB3004.eurprd04.prod.outlook.com>
Hi Peng,
On Thu, 19 Jul 2018 14:02:43 +0000
Peng Fan peng.fan at nxp.com wrote:
...
> > Also, in order to test this series we need a README file.
> > Please prepare one so that we can test it.
>
> Currently there is no public available code for atf and scfw, so
> There will no link in the README, I could only add steps
> on how to build out images. Is this ok?
I'd like to test this series, too. It would be good if a README
existed in the board directory, with some instructions how to
build and install an image on SD card (or other boot source, if
already supported). E.g. like board/freescale/mx6sabresd/README.
Thanks!
--
Anatolij
next prev parent reply other threads:[~2018-07-19 14:28 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-18 1:35 [U-Boot] [PATCH V2 00/32] i.MX: Add i.MX8QXP support Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 01/32] dt-bindings: pinctrl: add i.MX8QXP pads definition Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 02/32] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks definition Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 03/32] dt-bindings: soc: add i.MX8QXP pm and rsrc definition Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 04/32] imx8: add scfw macro definition Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 05/32] imx: add Kconfig entry for i.MX8QXP Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 06/32] arm: build mach-imx for i.MX8 Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 07/32] misc: add i.MX8 misc driver Peng Fan
2018-07-18 8:37 ` Lokesh Vutla
2018-07-18 8:52 ` Peng Fan
2018-07-18 9:04 ` Lokesh Vutla
2018-07-18 9:15 ` Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 08/32] misc: imx8: add scfw api impementation Peng Fan
2018-07-18 8:54 ` Lokesh Vutla
2018-07-18 9:08 ` Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 09/32] arm: global_data: add scu_dev for i.MX8 Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 10/32] imx: boot_mode: Add FLEXSPI boot entry Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 11/32] imx8: add imx-regs header file Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 12/32] imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 13/32] imx: add i.MX8 cpu type Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 14/32] armv8: add cpu core helper functions Peng Fan
2018-07-19 13:58 ` Fabio Estevam
2018-07-18 1:35 ` [U-Boot] [PATCH V2 15/32] imx8: add basic cpu support Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 16/32] imx8: add boot device detection Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 17/32] imx8: implement mmc_get_env_dev Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 18/32] imx8: add mmu and dram related functiions Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 19/32] imx8: add arch_cpu_init arch_cpu_init_dm Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 20/32] imx8: add iomux configuration api Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 21/32] imx8: add dummy clock Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 22/32] gpio: mxc_gpio: add support for i.MX8 Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 23/32] pinctrl: Add pinctrl driver " Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 24/32] power: Add power domain " Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 25/32] clk: imx: add clk driver for i.MX8QXP Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 26/32] serial_lpuart: Update lpuart driver to support i.MX8 Peng Fan
2018-07-19 14:03 ` Fabio Estevam
2018-07-18 1:35 ` [U-Boot] [PATCH V2 27/32] serial: lpuart: Enable RX and TX FIFO Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 28/32] serial: lpuart: support uclass clk api Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 29/32] fsl_esdhc: Update usdhc driver to support i.MX8 Peng Fan
2018-07-19 14:01 ` Fabio Estevam
2018-07-19 14:04 ` Peng Fan
2018-07-23 19:26 ` Fabio Estevam
2018-07-24 0:45 ` Peng Fan
2018-07-24 0:51 ` Fabio Estevam
2018-07-24 18:27 ` Troy Kisky
2018-07-24 18:28 ` Fabio Estevam
2018-07-25 0:06 ` Peng Fan
2018-07-18 1:36 ` [U-Boot] [PATCH V2 30/32] mmc: fsl_esdhc: add uclass clk support Peng Fan
2018-07-18 1:36 ` [U-Boot] [PATCH V2 31/32] arm: dts: introduce dtsi for i.MX8QXP Peng Fan
2018-07-18 1:36 ` [U-Boot] [PATCH V2 32/32] imx: add i.MX8QXP MEK board support Peng Fan
2018-07-18 8:29 ` [U-Boot] [PATCH V2 00/32] i.MX: Add i.MX8QXP support Lokesh Vutla
2018-07-18 12:05 ` Peng Fan
2018-07-18 12:43 ` Peter Robinson
2018-07-18 12:47 ` Peng Fan
2018-07-19 13:41 ` Fabio Estevam
2018-07-19 14:02 ` Peng Fan
2018-07-19 14:15 ` Fabio Estevam
2018-07-19 14:28 ` Anatolij Gustschin [this message]
2018-07-27 7:54 ` Peng Fan
2018-07-27 17:58 ` Troy Kisky
2018-07-28 2:43 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180719162836.7afed82a@crub \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox