[U-Boot] [PATCH v2 3/5] Kconfig: Sort bool, default, select and imply options

Michal Simek
2018-07-23T13:55:13Z

Fix Kconfig bool, default, select and imply options to be
alphabetically sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2:
- new patch

I have sorted only Kconfig which I need for the next patch.

---
arch/Kconfig | 54 +++++-----
arch/arm/Kconfig | 206 ++++++++++++++++++-------------------
arch/arm/mach-at91/Kconfig | 60 +++++------
arch/arm/mach-imx/mx5/Kconfig | 12 +--
arch/arm/mach-imx/mx6/Kconfig | 158 ++++++++++++++--------------
arch/arm/mach-imx/mx7/Kconfig | 18 ++--
arch/arm/mach-omap2/am33xx/Kconfig | 46 ++++-----
arch/arm/mach-omap2/omap3/Kconfig | 20 ++--
arch/arm/mach-rmobile/Kconfig.32 | 14 +--
arch/arm/mach-tegra/Kconfig | 8 +-
arch/microblaze/Kconfig | 4 +-
arch/mips/Kconfig | 50 ++++-----
arch/powerpc/cpu/mpc83xx/Kconfig | 6 +-
cmd/Kconfig | 14 +--
14 files changed, 335 insertions(+), 335 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index cbeb9f67348f..7967fa50ac22 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -10,12 +10,12 @@ choice

config ARC
bool "ARC architecture"
- select HAVE_PRIVATE_LIBGCC
- select SUPPORT_OF_CONTROL
select ARCH_EARLY_INIT_R
+ select ARC_TIMER
select CLK
+ select HAVE_PRIVATE_LIBGCC
+ select SUPPORT_OF_CONTROL
select TIMER
- select ARC_TIMER

config ARM
bool "ARM architecture"
@@ -46,10 +46,10 @@ config NDS32

config NIOS2
bool "Nios II architecture"
- select SUPPORT_OF_CONTROL
- select OF_CONTROL
- select DM
select CPU
+ select DM
+ select OF_CONTROL
+ select SUPPORT_OF_CONTROL

config PPC
bool "PowerPC architecture"
@@ -65,30 +65,30 @@ config RISCV
config SANDBOX
bool "Sandbox"
select BOARD_LATE_INIT
- select SUPPORT_OF_CONTROL
select DM
+ select DM_GPIO
+ select DM_I2C
select DM_KEYBOARD
- select DM_SPI_FLASH
+ select DM_MMC
select DM_SERIAL
- select DM_I2C
select DM_SPI
- select DM_GPIO
- select DM_MMC
+ select DM_SPI_FLASH
select HAVE_BLOCK_DEVICE
- select SPI
select LZO
+ select SPI
+ select SUPPORT_OF_CONTROL
imply CMD_GETTIME
imply CMD_HASH
imply CMD_IO
imply CMD_IOTRACE
imply CMD_LZMADEC
+ imply CMD_SATA
+ imply CMD_SF_TEST
imply CRC32_VERIFY
imply FAT_WRITE
imply HASH_VERIFY
imply LZMA
imply SCSI
- imply CMD_SATA
- imply CMD_SF_TEST

config SH
bool "SuperH architecture"
@@ -97,39 +97,39 @@ config SH
config X86
bool "x86 architecture"
select CREATE_ARCH_SYMLINK
- select HAVE_PRIVATE_LIBGCC
- select USE_PRIVATE_LIBGCC
- select SUPPORT_OF_CONTROL
- select OF_CONTROL
select DM
select DM_PCI
+ select HAVE_PRIVATE_LIBGCC
+ select OF_CONTROL
select PCI
+ select SUPPORT_OF_CONTROL
select TIMER
+ select USE_PRIVATE_LIBGCC
select X86_TSC_TIMER
imply BLK
+ imply CMD_FPGA_LOADMK
+ imply CMD_GETTIME
+ imply CMD_IO
+ imply CMD_IRQ
+ imply CMD_PCI
+ imply CMD_SF_TEST
+ imply CMD_ZBOOT
imply DM_ETH
imply DM_GPIO
imply DM_KEYBOARD
imply DM_MMC
imply DM_RTC
- imply DM_SERIAL
imply DM_SCSI
+ imply DM_SERIAL
imply DM_SPI
imply DM_SPI_FLASH
imply DM_USB
imply DM_VIDEO
imply SYSRESET
imply SYSRESET_X86
- imply CMD_FPGA_LOADMK
- imply CMD_GETTIME
- imply CMD_IO
- imply CMD_IRQ
- imply CMD_PCI
- imply CMD_SF_TEST
- imply CMD_ZBOOT
- imply USB_HOST_ETHER
imply USB_ETHER_ASIX
imply USB_ETHER_SMSC95XX
+ imply USB_HOST_ETHER

config XTENSA
bool "Xtensa architecture"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ce619641b753..0c43c58ef0ed 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -219,25 +219,25 @@ config CPU_ARM1176

config CPU_V7A
bool
- select HAS_VBAR
select HAS_THUMB2
+ select HAS_VBAR
select SYS_CACHE_SHIFT_6
imply SYS_ARM_MMU

config CPU_V7M
bool
select HAS_THUMB2
- select THUMB2_KERNEL
- select SYS_CACHE_SHIFT_5
select SYS_ARM_MPU
+ select SYS_CACHE_SHIFT_5
select SYS_THUMB_BUILD
+ select THUMB2_KERNEL

config CPU_V7R
bool
select HAS_THUMB2
- select SYS_CACHE_SHIFT_6
- select SYS_ARM_MPU
select SYS_ARM_CACHE_CP15
+ select SYS_ARM_MPU
+ select SYS_CACHE_SHIFT_6

config CPU_PXA
bool
@@ -427,19 +427,19 @@ config ARCH_DAVINCI

config KIRKWOOD
bool "Marvell Kirkwood"
- select CPU_ARM926EJS
- select BOARD_EARLY_INIT_F
select ARCH_MISC_INIT
+ select BOARD_EARLY_INIT_F
+ select CPU_ARM926EJS

config ARCH_MVEBU
bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
- select OF_CONTROL
- select OF_SEPARATE
select DM
select DM_ETH
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select OF_CONTROL
+ select OF_SEPARATE
select SPI

config TARGET_DEVKIT3250
@@ -463,31 +463,31 @@ config ORION5X

config TARGET_SPEAR300
bool "Support spear300"
- select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
- imply CMD_SAVES
+ select CPU_ARM926EJS
select PL011_SERIAL
+ imply CMD_SAVES

config TARGET_SPEAR310
bool "Support spear310"
- select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
- imply CMD_SAVES
+ select CPU_ARM926EJS
select PL011_SERIAL
+ imply CMD_SAVES

config TARGET_SPEAR320
bool "Support spear320"
- select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
- imply CMD_SAVES
+ select CPU_ARM926EJS
select PL011_SERIAL
+ imply CMD_SAVES

config TARGET_SPEAR600
bool "Support spear600"
- select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
- imply CMD_SAVES
+ select CPU_ARM926EJS
select PL011_SERIAL
+ imply CMD_SAVES

config TARGET_STV0991
bool "Support stv0991"
@@ -496,16 +496,16 @@ config TARGET_STV0991
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select PL01X_SERIAL
select SPI
select SPI_FLASH
- select PL01X_SERIAL

config TARGET_X600
bool "Support x600"
select BOARD_LATE_INIT
select CPU_ARM926EJS
- select SUPPORT_SPL
select PL011_SERIAL
+ select SUPPORT_SPL

config TARGET_WOODBURN
bool "Support woodburn"
@@ -528,8 +528,8 @@ config TARGET_MX35PDK
config ARCH_BCM283X
bool "Broadcom BCM283X family"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OF_CONTROL
select PL01X_SERIAL
select SERIAL_SEARCH_ALL
@@ -577,13 +577,13 @@ config TARGET_BCM28155_AP
config TARGET_BCMCYGNUS
bool "Support bcmcygnus"
select CPU_V7A
- imply CRC32_VERIFY
+ imply BCM_SF2_ETH
+ imply BCM_SF2_ETH_GMAC
imply CMD_HASH
+ imply CRC32_VERIFY
imply FAT_WRITE
imply HASH_VERIFY
imply NETDEVICES
- imply BCM_SF2_ETH
- imply BCM_SF2_ETH_GMAC

config TARGET_BCMNSP
bool "Support bcmnsp"
@@ -600,12 +600,12 @@ config TARGET_BCMNS2
config ARCH_EXYNOS
bool "Samsung EXYNOS"
select DM
+ select DM_GPIO
select DM_I2C
- select DM_SPI_FLASH
+ select DM_KEYBOARD
select DM_SERIAL
select DM_SPI
- select DM_GPIO
- select DM_KEYBOARD
+ select DM_SPI_FLASH
select SPI
imply FAT_WRITE

@@ -613,9 +613,9 @@ config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
select CPU_V7A
select DM
- select DM_SERIAL
select DM_GPIO
select DM_I2C
+ select DM_SERIAL

config ARCH_HIGHBANK
bool "Calxeda Highbank"
@@ -630,14 +630,14 @@ config ARCH_INTEGRATOR

config ARCH_KEYSTONE
bool "TI Keystone"
+ select CMD_POWEROFF
select CPU_V7A
select SUPPORT_SPL
- select SYS_THUMB_BUILD
- select CMD_POWEROFF
select SYS_ARCH_TIMER
+ select SYS_THUMB_BUILD
imply CMD_MTDPARTS
- imply FIT
imply CMD_SAVES
+ imply FIT

config ARCH_OMAP2PLUS
bool "TI OMAP2+"
@@ -690,12 +690,12 @@ config ARCH_MX7ULP

config ARCH_MX7
bool "Freescale MX7"
+ select ARCH_MISC_INIT
+ select BOARD_EARLY_INIT_F
select CPU_V7A
select SYS_FSL_HAS_SEC if SECURE_BOOT
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
- select BOARD_EARLY_INIT_F
- select ARCH_MISC_INIT
imply MXC_GPIO

config ARCH_MX6
@@ -714,8 +714,8 @@ endif

config ARCH_MX5
bool "Freescale MX5"
- select CPU_V7A
select BOARD_EARLY_INIT_F
+ select CPU_V7A
imply MXC_GPIO

config ARCH_OWL
@@ -734,9 +734,9 @@ config ARCH_QEMU

config ARCH_RMOBILE
bool "Renesas ARM SoCs"
+ select BOARD_EARLY_INIT_F
select DM
select DM_SERIAL
- select BOARD_EARLY_INIT_F
imply FAT_WRITE
imply SYS_THUMB_BUILD

@@ -751,30 +751,32 @@ config ARCH_SNAPDRAGON
select DM
select DM_GPIO
select DM_SERIAL
- select SPMI
+ select MSM_SMEM
select OF_CONTROL
select OF_SEPARATE
select SMEM
- select MSM_SMEM
+ select SPMI

config ARCH_SOCFPGA
bool "Altera SOCFPGA family"
select ARCH_EARLY_INIT_R
select ARCH_MISC_INIT
+ select ARM64 if TARGET_SOCFPGA_STRATIX10
select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select DM
select DM_SERIAL
select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select OF_CONTROL
+ select SPL_DM_SERIAL
select SPL_LIBCOMMON_SUPPORT
select SPL_LIBDISK_SUPPORT
select SPL_LIBGENERIC_SUPPORT
select SPL_MMC_SUPPORT if DM_MMC
select SPL_NAND_SUPPORT if SPL_NAND_DENALI
select SPL_OF_CONTROL
- select SPL_SERIAL_SUPPORT
- select SPL_DM_SERIAL
select SPL_RESET_SUPPORT
+ select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
+ select SPL_SERIAL_SUPPORT
select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
select SPL_SPI_SUPPORT if DM_SPI
select SPL_WATCHDOG_SUPPORT
@@ -782,14 +784,12 @@ config ARCH_SOCFPGA
select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
select SYS_NS16550
select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
- select ARM64 if TARGET_SOCFPGA_STRATIX10
imply CMD_MTDPARTS
imply CRC32_VERIFY
imply DM_SPI
imply DM_SPI_FLASH
imply FAT_WRITE
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
- select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10

config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
@@ -809,12 +809,12 @@ config ARCH_SUNXI
select SPECIFY_CONSOLE_INDEX
select SPL_STACK_R if SPL
select SPL_SYS_MALLOC_SIMPLE if SPL
- select SYS_NS16550
select SPL_SYS_THUMB_BUILD if !ARM64
+ select SYS_NS16550
select SYS_THUMB_BUILD if !ARM64
select USB if DISTRO_DEFAULTS
- select USB_STORAGE if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS
+ select USB_STORAGE if DISTRO_DEFAULTS
select USE_TINY_PRINTF
imply CMD_GPT
imply DISTRO_DEFAULTS
@@ -839,51 +839,51 @@ config ARCH_VF610

config ARCH_ZYNQ
bool "Xilinx Zynq based platform"
+ select BOARD_EARLY_INIT_F if WDT
select BOARD_LATE_INIT
+ select CLK
+ select CLK_ZYNQ
select CPU_V7A
- select SUPPORT_SPL
- select OF_CONTROL
- select SPL_BOARD_INIT if SPL
- select BOARD_EARLY_INIT_F if WDT
- select SPL_OF_CONTROL if SPL
select DM
select DM_ETH if NET
- select SPL_DM if SPL
select DM_MMC if MMC
- select DM_SPI
select DM_SERIAL
+ select DM_SPI
select DM_SPI_FLASH
- select SPL_SEPARATE_BSS if SPL
select DM_USB if USB
- select CLK
- select SPL_CLK if SPL
- select CLK_ZYNQ
+ select OF_CONTROL
select SPI
+ select SPL_BOARD_INIT if SPL
+ select SPL_CLK if SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL
+ imply ARCH_EARLY_INIT_R
imply CMD_CLK
- imply FAT_WRITE
imply CMD_SPL
- imply ARCH_EARLY_INIT_R
+ imply FAT_WRITE

config ARCH_ZYNQMP_R5
bool "Xilinx ZynqMP R5 based platform"
+ select CLK
select CPU_V7R
- select OF_CONTROL
select DM
select DM_SERIAL
- select CLK
+ select OF_CONTROL

config ARCH_ZYNQMP
bool "Xilinx ZynqMP based platform"
select ARM64
select BOARD_LATE_INIT
+ select CLK
select DM
- select OF_CONTROL
select DM_SERIAL
- select SUPPORT_SPL
- select CLK
+ select DM_USB if USB
+ select OF_CONTROL
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
- select DM_USB if USB
+ select SUPPORT_SPL
imply FAT_WRITE

config TEGRA
@@ -899,8 +899,8 @@ config TARGET_VEXPRESS64_AEMV8A
config TARGET_VEXPRESS64_BASE_FVP
bool "Support Versatile Express ARMv8a FVP BASE model"
select ARM64
- select SEMIHOSTING
select PL01X_SERIAL
+ select SEMIHOSTING

config TARGET_VEXPRESS64_BASE_FVP_DRAM
bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
@@ -920,9 +920,9 @@ config TARGET_VEXPRESS64_JUNO
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
- select ARCH_MISC_INIT
help
Support for Freescale LS2080A_EMU platform
The LS2080A Development System (EMULATOR) is a pre silicon
@@ -932,9 +932,9 @@ config TARGET_LS2080A_EMU
config TARGET_LS2080A_SIMU
bool "Support ls2080a_simu"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
- select ARCH_MISC_INIT
help
Support for Freescale LS2080A_SIMU platform
The LS2080A Development System (QDS) is a pre silicon
@@ -944,9 +944,9 @@ config TARGET_LS2080A_SIMU
config TARGET_LS1088AQDS
bool "Support ls1088aqds"
select ARCH_LS1088A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
- select ARCH_MISC_INIT
select BOARD_LATE_INIT
select SUPPORT_SPL
help
@@ -958,11 +958,11 @@ config TARGET_LS1088AQDS
config TARGET_LS2080AQDS
bool "Support ls2080aqds"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
- select ARCH_MISC_INIT
imply SCSI
imply SCSI_AHCI
help
@@ -974,11 +974,11 @@ config TARGET_LS2080AQDS
config TARGET_LS2080ARDB
bool "Support ls2080ardb"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
- select ARCH_MISC_INIT
imply SCSI
imply SCSI_AHCI
help
@@ -990,11 +990,11 @@ config TARGET_LS2080ARDB
config TARGET_LS2081ARDB
bool "Support ls2081ardb"
select ARCH_LS2080A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
- select ARCH_MISC_INIT
help
Support for Freescale LS2081ARDB platform.
The LS2081A Reference design board (RDB) is a high-performance
@@ -1018,9 +1018,9 @@ config TARGET_POPLAR
bool "Support Poplar 96boards Enterprise Edition Platform"
select ARM64
select DM
- select OF_CONTROL
select DM_SERIAL
select DM_USB
+ select OF_CONTROL
select PL01X_SERIAL
help
Support for Poplar 96boards EE platform. It features a HI3798cv200
@@ -1067,8 +1067,8 @@ config TARGET_LS1012A2G5RDB
config TARGET_LS1012AFRWY
bool "Support ls1012afrwy"
select ARCH_LS1012A
- select BOARD_LATE_INIT
select ARM64
+ select BOARD_LATE_INIT
imply SCSI
imply SCSI_AHCI
help
@@ -1090,9 +1090,9 @@ config TARGET_LS1012AFRDM
config TARGET_LS1088ARDB
bool "Support ls1088ardb"
select ARCH_LS1088A
+ select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
- select ARCH_MISC_INIT
select BOARD_LATE_INIT
select SUPPORT_SPL
help
@@ -1103,40 +1103,40 @@ config TARGET_LS1088ARDB

config TARGET_LS1021AQDS
bool "Support ls1021aqds"
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select SUPPORT_SPL
- select ARCH_LS1021A
- select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
+ select SUPPORT_SPL
select SYS_FSL_DDR
- select BOARD_EARLY_INIT_F
imply SCSI

config TARGET_LS1021ATWR
bool "Support ls1021atwr"
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select SUPPORT_SPL
- select ARCH_LS1021A
- select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
- select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
imply SCSI

config TARGET_LS1021AIOT
bool "Support ls1021aiot"
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
select BOARD_LATE_INIT
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
- select ARCH_LS1021A
- select ARCH_SUPPORT_PSCI
imply SCSI
help
Support for Freescale LS1021AIOT platform.
@@ -1149,9 +1149,9 @@ config TARGET_LS1043AQDS
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
imply SCSI
help
Support for Freescale LS1043AQDS platform.
@@ -1161,9 +1161,9 @@ config TARGET_LS1043ARDB
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
imply SCSI
help
Support for Freescale LS1043ARDB platform.
@@ -1173,10 +1173,10 @@ config TARGET_LS1046AQDS
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
- select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
imply SCSI
help
Support for Freescale LS1046AQDS platform.
@@ -1189,11 +1189,11 @@ config TARGET_LS1046ARDB
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
select POWER_MC34VR500
- select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL
imply SCSI
help
Support for Freescale LS1046ARDB platform.
@@ -1247,12 +1247,12 @@ config STM32

config ARCH_STI
bool "Support STMicrolectronics SoCs"
+ select BLK
select CPU_V7A
select DM
- select DM_SERIAL
- select BLK
select DM_MMC
select DM_RESET
+ select DM_SERIAL
help
Support for STMicroelectronics STiH407/10 SoC family.
This SoC is used on Linaro 96Board STiH410-B2260
@@ -1266,9 +1266,9 @@ config ARCH_STM32MP
select DM_GPIO
select DM_RESET
select DM_SERIAL
+ select MISC
select OF_CONTROL
select OF_LIBFDT
- select MISC
select PINCTRL
select REGMAP
select SUPPORT_SPL
@@ -1283,44 +1283,44 @@ config ARCH_STM32MP

config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
- select OF_CONTROL
select BLK
select DM
- select SPL_DM if SPL
- select SYS_MALLOC_F
- select SYS_THUMB_BUILD if !ARM64
- select SPL_SYS_MALLOC_SIMPLE if SPL
select DM_GPIO
select DM_I2C
select DM_MMC
+ select DM_PWM
+ select DM_REGULATOR
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
select DM_USB if USB
- select DM_PWM
- select DM_REGULATOR
select ENABLE_ARM_SOC_BOOT0_HOOK
+ select OF_CONTROL
select SPI
+ select SPL_DM if SPL
+ select SPL_SYS_MALLOC_SIMPLE if SPL
+ select SYS_MALLOC_F
+ select SYS_THUMB_BUILD if !ARM64
+ imply ADC
imply DISTRO_DEFAULTS
imply FAT_WRITE
- imply USB_FUNCTION_FASTBOOT
- imply SPL_SYSRESET
- imply TPL_SYSRESET
- imply ADC
imply SARADC_ROCKCHIP
+ imply SPL_SYSRESET
imply SYS_NS16550
+ imply TPL_SYSRESET
+ imply USB_FUNCTION_FASTBOOT

config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
select ARM64
select OF_CONTROL
- select SYS_CACHE_SHIFT_7
select PL01X_SERIAL
+ select SYS_CACHE_SHIFT_7

config ARCH_ASPEED
bool "Support Aspeed SoCs"
- select OF_CONTROL
select DM
+ select OF_CONTROL

endchoice

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index ce6be3829afe..1a56957cf9d1 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -76,18 +76,18 @@ config TARGET_SNAPPER9260
bool "Support snapper9260"
select AT91SAM9260
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_GURNARD
bool "Support gurnard"
select AT91SAM9G45
select BOARD_LATE_INIT
select DM
+ select DM_ETH
+ select DM_GPIO
select DM_SERIAL
select DM_SPI
- select DM_GPIO
- select DM_ETH
select SPI

config TARGET_AT91SAM9261EK
@@ -115,8 +115,8 @@ config TARGET_PM9263
config TARGET_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK board"
select AT91SAM9M10G45
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL

config TARGET_PM9G45
bool "Ronetix pm9g45 board"
@@ -130,8 +130,8 @@ config TARGET_PICOSAM9G45
config TARGET_AT91SAM9N12EK
bool "Atmel AT91SAM9N12-EK board"
select AT91SAM9N12
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL

config TARGET_AT91SAM9RLEK
bool "Atmel at91sam9rl reference board"
@@ -141,28 +141,28 @@ config TARGET_AT91SAM9RLEK
config TARGET_AT91SAM9X5EK
bool "Atmel AT91SAM9X5-EK board"
select AT91SAM9X5
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SUPPORT_SPL

config TARGET_SAMA5D2_PTC_EK
bool "SAMA5D2 PTC EK board"
- select SAMA5D2
select BOARD_EARLY_INIT_F
+ select SAMA5D2

config TARGET_SAMA5D2_XPLAINED
bool "SAMA5D2 Xplained board"
- select SAMA5D2
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SAMA5D2
+ select SUPPORT_SPL

config TARGET_SAMA5D27_SOM1_EK
bool "SAMA5D27 SOM1 EK board"
- select CPU_V7A
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select CPU_V7A
+ select SUPPORT_SPL
help
The SAMA5D27 SOM1 embeds SAMA5D2 SiP(System in Package),
a 64Mbit QSPI flash, KSZ8081 Phy and a Mac-address EEPROM
@@ -172,30 +172,30 @@ config TARGET_SAMA5D27_SOM1_EK

config TARGET_SAMA5D3_XPLAINED
bool "SAMA5D3 Xplained board"
+ select BOARD_EARLY_INIT_F
select SAMA5D3
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F

config TARGET_SAMA5D3XEK
bool "SAMA5D3X-EK board"
- select SAMA5D3
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SAMA5D3
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F

config TARGET_SAMA5D4_XPLAINED
bool "SAMA5D4 Xplained board"
- select SAMA5D4
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SAMA5D4
+ select SUPPORT_SPL

config TARGET_SAMA5D4EK
bool "SAMA5D4 Evaluation Kit"
- select SAMA5D4
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SAMA5D4
+ select SUPPORT_SPL

config TARGET_MEESC
bool "Support meesc"
@@ -204,39 +204,39 @@ config TARGET_MEESC
config TARGET_CORVUS
bool "Support corvus"
select AT91SAM9M10G45
- select SUPPORT_SPL
select DM
- select DM_SERIAL
- select DM_GPIO
select DM_ETH
+ select DM_GPIO
+ select DM_SERIAL
+ select SUPPORT_SPL

config TARGET_TAURUS
bool "Support taurus"
select AT91SAM9G20
- select SUPPORT_SPL
select DM
+ select DM_ETH
+ select DM_GPIO
select DM_SERIAL
select DM_SPI
- select DM_GPIO
- select DM_ETH
select SPI
+ select SUPPORT_SPL

config TARGET_SMARTWEB
bool "Support smartweb"
select AT91SAM9260
- select SUPPORT_SPL
select DM
- select DM_SERIAL
- select DM_GPIO
select DM_ETH
+ select DM_GPIO
+ select DM_SERIAL
+ select SUPPORT_SPL

config TARGET_VINCO
bool "Support VINCO"
- select SAMA5D4
- select SUPPORT_SPL
select DM
select DM_SPI
+ select SAMA5D4
select SPI
+ select SUPPORT_SPL

config TARGET_WB45N
bool "Support Laird WB45N"
@@ -245,10 +245,10 @@ config TARGET_WB45N

config TARGET_WB50N
bool "Support Laird WB50N"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select CPU_V7A
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F

endchoice

diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
index 3654670442fb..1bb373bf2d1c 100644
--- a/arch/arm/mach-imx/mx5/Kconfig
+++ b/arch/arm/mach-imx/mx5/Kconfig
@@ -1,14 +1,14 @@
if ARCH_MX5

config MX5
- select GPT_TIMER
bool
default y
+ select GPT_TIMER

config MX51
bool
- select SYS_FSL_ERRATUM_ESDHC_A001
select ARM_CORTEX_A8_CVE_2017_5715
+ select SYS_FSL_ERRATUM_ESDHC_A001

config MX53
bool
@@ -21,13 +21,13 @@ choice
config TARGET_KP_IMX53
bool "Support K+P imx53 board"
select BOARD_LATE_INIT
- select MX53
select DM
- select DM_SERIAL
select DM_ETH
- select DM_I2C
select DM_GPIO
+ select DM_I2C
select DM_PMIC
+ select DM_SERIAL
+ select MX53

config TARGET_MX51EVK
bool "Support mx51evk"
@@ -41,9 +41,9 @@ config TARGET_MX53ARD
config TARGET_MX53CX9020
bool "Support CX9020"
select BOARD_LATE_INIT
- select MX53
select DM
select DM_SERIAL
+ select MX53

config TARGET_MX53EVK
bool "Support mx53evk"
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index b7b77cc51b97..5cce9ce23c0e 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -1,89 +1,89 @@
if ARCH_MX6

config MX6_SMP
+ bool
select ARM_ERRATA_751472
select ARM_ERRATA_761320
select ARM_ERRATA_794072
select ARM_ERRATA_845369
select MP
- bool

config MX6
- select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
- select GPT_TIMER if !MX6UL && !MX6ULL
bool
default y
+ select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
+ select GPT_TIMER if !MX6UL && !MX6ULL
imply CMD_FUSE

config MX6D
+ bool
select HAS_CAAM
select MX6_SMP
- bool

config MX6DL
+ bool
select HAS_CAAM
select MX6_SMP
- bool

config MX6Q
+ bool
select HAS_CAAM
select MX6_SMP
- bool

config MX6QDL
+ bool
select HAS_CAAM
select MX6_SMP
- bool

config MX6S
- select HAS_CAAM
bool
+ select HAS_CAAM

config MX6SL
bool

config MX6SX
+ bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
- bool

config MX6SLL
- select ROM_UNIFIED_SECTIONS
bool
+ select ROM_UNIFIED_SECTIONS

config MX6UL
+ bool
select HAS_CAAM
- select SYS_L2CACHE_OFF
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
- bool
+ select SYS_L2CACHE_OFF

config MX6UL_LITESOM
bool
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL

config MX6UL_OPOS6UL
bool
- select MX6UL
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6UL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL

config MX6ULL
- select SYS_L2CACHE_OFF
+ bool
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
- bool
+ select SYS_L2CACHE_OFF

config MX6_DDRCAL
bool "Include dynamic DDR calibration routines"
@@ -106,10 +106,10 @@ config TARGET_ADVANTECH_DMS_BA16
config TARGET_APALIS_IMX6
bool "Toradex Apalis iMX6 board"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_SERIAL
select DM_THERMAL
+ select SUPPORT_SPL
imply CMD_SATA

config TARGET_ARISTAINETOS
@@ -125,44 +125,44 @@ config TARGET_ARISTAINETOS2B

config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
- select MX6QDL
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL

config TARGET_CM_FX6
bool "CM-FX6"
- select SUPPORT_SPL
- select MX6QDL
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ select MX6QDL
+ select SUPPORT_SPL

config TARGET_COLIBRI_IMX6
bool "Toradex Colibri iMX6 board"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_SERIAL
select DM_THERMAL
+ select SUPPORT_SPL

config TARGET_DHCOMIMX6
bool "dh_imx6"
- select MX6QDL
- select BOARD_LATE_INIT
select BOARD_EARLY_INIT_F
- select SUPPORT_SPL
+ select BOARD_LATE_INIT
select DM
select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
imply CMD_SPL

config TARGET_DISPLAY5
bool "LWN DISPLAY5 board"
- select SUPPORT_SPL
select DM
select DM_SERIAL
+ select SUPPORT_SPL

config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
@@ -192,8 +192,8 @@ config TARGET_MCCMON6

config TARGET_MX6CUBOXI
bool "Solid-run mx6 boards"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL

config TARGET_MX6LOGICPD
@@ -222,9 +222,6 @@ config TARGET_MX6QARM2

config TARGET_MX6DL_MAMOJ
bool "Support BTicino Mamoj"
- select MX6QDL
- select OF_CONTROL
- select PINCTRL
select DM
select DM_ETH
select DM_GPIO
@@ -233,59 +230,62 @@ config TARGET_MX6DL_MAMOJ
select DM_PMIC
select DM_PMIC_PFUZE100
select DM_THERMAL
+ select MX6QDL
+ select OF_CONTROL
+ select PINCTRL
select SPL
- select SUPPORT_SPL
select SPL_DM if SPL
- select SPL_OF_LIBFDT if SPL
- select SPL_OF_CONTROL if SPL
- select SPL_PINCTRL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_GPIO_SUPPORT if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBDISK_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_MMC_SUPPORT if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_OF_LIBFDT if SPL
+ select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
select SPL_SERIAL_SUPPORT if SPL
- select SPL_USB_HOST_SUPPORT if SPL
select SPL_USB_GADGET_SUPPORT if SPL
+ select SPL_USB_HOST_SUPPORT if SPL
select SPL_USB_SDP_SUPPORT if SPL
select SPL_WATCHDOG_SUPPORT if SPL
+ select SUPPORT_SPL

config TARGET_MX6Q_ENGICAM
bool "Support Engicam i.Core(RQS)"
select BOARD_LATE_INIT
- select MX6QDL
- select OF_CONTROL
- select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6QDL
+ select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
+ select SPL_OF_LIBFDT
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL

config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
- select MX6QDL
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6QDL
+ select SUPPORT_SPL

config TARGET_MX6SABRESD
bool "mx6sabresd"
- select MX6QDL
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6QDL
+ select SUPPORT_SPL

config TARGET_MX6SLEVK
bool "mx6slevk"
@@ -295,73 +295,73 @@ config TARGET_MX6SLEVK
config TARGET_MX6SLLEVK
bool "mx6sll evk"
select BOARD_LATE_INIT
- select MX6SLL
select DM
select DM_THERMAL
+ select MX6SLL

config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select MX6SX
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6SX
+ select SUPPORT_SPL

config TARGET_MX6SXSABREAUTO
bool "mx6sxsabreauto"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select MX6SX
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6SX

config TARGET_MX6UL_9X9_EVK
bool "mx6ul_9x9_evk"
select BOARD_LATE_INIT
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL

config TARGET_MX6UL_14X14_EVK
- select BOARD_LATE_INIT
bool "mx6ul_14x14_evk"
- select MX6UL
+ select BOARD_LATE_INIT
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL

config TARGET_MX6UL_ENGICAM
bool "Support Engicam GEAM6UL/Is.IoT"
select BOARD_LATE_INIT
- select MX6UL
- select OF_CONTROL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6UL
+ select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL

config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"
select BOARD_LATE_INIT
- select MX6ULL
select DM
select DM_THERMAL
+ select MX6ULL

config TARGET_NITROGEN6X
bool "nitrogen6x"
- imply USB_HOST_ETHER
imply USB_ETHER_ASIX
- imply USB_ETHER_SMSC95XX
imply USB_ETHER_MCS7830
+ imply USB_ETHER_SMSC95XX
+ imply USB_HOST_ETHER

config TARGET_OPOS6ULDEV
bool "Armadeus OPOS6ULDev board"
@@ -396,8 +396,8 @@ config TARGET_PCM058

config TARGET_PFLA02
bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL

config TARGET_SECOMX6
@@ -415,12 +415,12 @@ config TARGET_TITANIUM

config TARGET_KP_IMX6Q_TPC
bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
- select MX6QDL
- select BOARD_LATE_INIT
select BOARD_EARLY_INIT_F
- select SUPPORT_SPL
+ select BOARD_LATE_INIT
select DM
select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
imply CMD_SPL

config TARGET_TQMA6
@@ -429,57 +429,57 @@ config TARGET_TQMA6

config TARGET_UDOO
bool "udoo"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL

config TARGET_UDOO_NEO
bool "UDOO Neo"
select BOARD_LATE_INIT
- select SUPPORT_SPL
- select MX6SX
select DM
select DM_THERMAL
+ select MX6SX
+ select SUPPORT_SPL

config TARGET_SAMTEC_VINING_2000
bool "samtec VIN|ING 2000"
select BOARD_LATE_INIT
- select MX6SX
select DM
select DM_THERMAL
+ select MX6SX

config TARGET_WANDBOARD
bool "wandboard"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL

config TARGET_WARP
bool "WaRP"
- select MX6SL
select BOARD_LATE_INIT
+ select MX6SL

config TARGET_XPRESS
bool "CCV xPress"
select BOARD_LATE_INIT
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL

config TARGET_ZC5202
bool "zc5202"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select SUPPORT_SPL

config TARGET_ZC5601
bool "zc5601"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select SUPPORT_SPL

endchoice

diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig
index 2a3db860bbcf..f618a7bb9d1f 100644
--- a/arch/arm/mach-imx/mx7/Kconfig
+++ b/arch/arm/mach-imx/mx7/Kconfig
@@ -2,19 +2,19 @@ if ARCH_MX7

config MX7
bool
+ default y
+ select ARCH_SUPPORT_PSCI
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
- select CPU_V7_HAS_VIRT
- select CPU_V7_HAS_NONSEC
- select ARCH_SUPPORT_PSCI
imply CMD_FUSE
- default y

config MX7D
+ bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
imply CMD_FUSE
- bool

choice
prompt "MX7 board select"
@@ -22,31 +22,31 @@ choice

config TARGET_CL_SOM_IMX7
bool "CL-SOM-iMX7"
- select MX7D
select DM
select DM_THERMAL
+ select MX7D
select SUPPORT_SPL

config TARGET_MX7DSABRESD
bool "mx7dsabresd"
select BOARD_LATE_INIT
- select MX7D
select DM
select DM_THERMAL
+ select MX7D

config TARGET_PICO_IMX7D
bool "pico-imx7d"
select BOARD_LATE_INIT
- select MX7D
select DM
select DM_THERMAL
+ select MX7D

config TARGET_WARP7
bool "warp7"
select BOARD_LATE_INIT
- select MX7D
select DM
select DM_THERMAL
+ select MX7D

config TARGET_COLIBRI_IMX7
bool "Support Colibri iMX7S/iMX7D modules"
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 76da6d911ed6..94d9d868f893 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -31,9 +31,11 @@ config TARGET_AM335X_EVM
bool "Support am335x_evm"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select TI_I2C_BOARD_DETECT
+ imply SPL_DM
+ imply SPL_DM_SEQ_ALIAS
imply SPL_ENV_SUPPORT
imply SPL_EXT_SUPPORT
imply SPL_FAT_SUPPORT
@@ -44,15 +46,13 @@ config TARGET_AM335X_EVM
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_NAND_SUPPORT
+ imply SPL_OF_LIBFDT
imply SPL_POWER_SUPPORT
+ imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
+ imply SPL_SYS_MALLOC_SIMPLE
imply SPL_WATCHDOG_SUPPORT
imply SPL_YMODEM_SUPPORT
- imply SPL_SYS_MALLOC_SIMPLE
- imply SPL_SEPARATE_BSS
- imply SPL_DM
- imply SPL_DM_SEQ_ALIAS
- imply SPL_OF_LIBFDT
help
This option specifies support for the AM335x
GP and HS EVM development platforms. The AM335x
@@ -65,30 +65,30 @@ config TARGET_AM335X_BALTOS
bool "Support am335x_baltos"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_AM335X_IGEP003X
bool "Support am335x_igep003x"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_AM335X_SHC
bool "Support am335x based shc board from bosch"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
imply CMD_SPL

config TARGET_AM335X_SL50
bool "Support am335x_sl50"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_BAV335X
bool "Support bav335x"
@@ -122,68 +122,68 @@ config TARGET_CHILIBOARD
config TARGET_CM_T335
bool "Support cm_t335"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_DRACO
bool "Support draco"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_ETAMIN
bool "Support etamin"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_PCM051
bool "Support pcm051"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_PENGWYN
bool "Support pengwyn"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_PEPPER
bool "Support pepper"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_PXM2
bool "Support pxm2"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_RASTABAN
bool "Support rastaban"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_RUT
bool "Support rut"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_THUBAN
bool "Support thuban"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_PDU001
bool "Support PDU001"
@@ -258,6 +258,8 @@ endif
if AM43XX || AM33XX
config ISW_ENTRY_ADDR
hex "Address in memory or XIP flash of bootloader entry point"
+ default 0x402F4000 if AM43XX
+ default 0x402F0400 if AM33XX
help
After any reset, the boot ROM on the AM43XX SOC
searches the boot media for a valid boot image.
@@ -268,11 +270,10 @@ config ISW_ENTRY_ADDR
point address depending on the device type
(secure/non-secure), boot media (xip/non-xip) and
image headers.
- default 0x402F4000 if AM43XX
- default 0x402F0400 if AM33XX

config PUB_ROM_DATA_SIZE
hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
+ default 0x8400
help
During the device boot, the public ROM uses the top of
the public L3 OCMC RAM to store r/w data like stack,
@@ -283,5 +284,4 @@ config PUB_ROM_DATA_SIZE
boot image. Once the ROM transfers control to the boot
image, this area is no longer used, and can be reclaimed
for run time use by the boot image.
- default 0x8400
endif
diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 6d714f6cdb2c..9e4227d8266b 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -23,10 +23,10 @@ choice
config TARGET_AM3517_EVM
bool "AM3517 EVM"
select DM
- select DM_SERIAL
select DM_GPIO
select DM_I2C
select DM_MMC
+ select DM_SERIAL

config TARGET_MT_VENTOUX
bool "TeeJet Mt.Ventoux"
@@ -36,8 +36,8 @@ config TARGET_MT_VENTOUX
config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_5
select OMAP3_GPIO_6

@@ -56,21 +56,21 @@ config TARGET_CM_T3517
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_OMAP3_EVM
bool "TI OMAP3 EVM"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_3

config TARGET_OMAP3_IGEP00X0
bool "IGEP"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_5
select OMAP3_GPIO_6
@@ -78,8 +78,8 @@ config TARGET_OMAP3_IGEP00X0
config TARGET_OMAP3_OVERO
bool "OMAP35xx Gumstix Overo"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
@@ -89,8 +89,8 @@ config TARGET_OMAP3_OVERO
config TARGET_OMAP3_ZOOM1
bool "TI Zoom1"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_AM3517_CRANE
bool "am3517_crane"
@@ -118,8 +118,8 @@ config TARGET_OMAP3_LOGIC
bool "OMAP3 Logic"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_6
@@ -143,14 +143,14 @@ config TARGET_TWISTER
config TARGET_OMAP3_CAIRO
bool "QUIPOS CAIRO"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL

config TARGET_SNIPER
bool "LG Optimus Black"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32
index c0b5b2457cb1..dc517350ee19 100644
--- a/arch/arm/mach-rmobile/Kconfig.32
+++ b/arch/arm/mach-rmobile/Kconfig.32
@@ -47,25 +47,25 @@ config TARGET_GOSE
bool "Gose board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET

config TARGET_KOELSCH
bool "Koelsch board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET

config TARGET_LAGER
bool "Lager board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET

config TARGET_KZM9G
bool "KZM9D board"
@@ -74,33 +74,33 @@ config TARGET_ALT
bool "Alt board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET

config TARGET_SILK
bool "Silk board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET

config TARGET_PORTER
bool "Porter board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET

config TARGET_STOUT
bool "Stout board"
select DM
select DM_SERIAL
+ select SPL_TINY_MEMSET
select SUPPORT_SPL
select USE_TINY_PRINTF
- select SPL_TINY_MEMSET

endchoice

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 0fb0c6339018..cd03705b64c0 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -22,6 +22,8 @@ config TEGRA_IVC

config TEGRA_COMMON
bool "Tegra common options"
+ select BINMAN
+ select BOARD_EARLY_INIT_F
select CLK
select DM
select DM_ETH
@@ -35,11 +37,9 @@ config TEGRA_COMMON
select DM_SPI
select DM_SPI_FLASH
select MISC
- select SPI
select OF_CONTROL
+ select SPI
select VIDCONSOLE_AS_LCD if DM_VIDEO
- select BOARD_EARLY_INIT_F
- select BINMAN
imply CRC32_VERIFY

config TEGRA_NO_BPMP
@@ -98,8 +98,8 @@ config TEGRA124

config TEGRA210
bool "Tegra210 family"
- select TEGRA_GPIO
select TEGRA_ARMV8_COMMON
+ select TEGRA_GPIO
select TEGRA_NO_BPMP

config TEGRA186
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index c56459345136..1df1ecf72d19 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -11,10 +11,10 @@ choice
config TARGET_MICROBLAZE_GENERIC
bool "Support microblaze-generic"
select BOARD_LATE_INIT
- select SUPPORT_SPL
- select OF_CONTROL
select DM
select DM_SERIAL
+ select OF_CONTROL
+ select SUPPORT_SPL
select SYSRESET

endchoice
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d07b92d1b442..315d89dbeb3f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -14,13 +14,13 @@ choice

config TARGET_QEMU_MIPS
bool "Support qemu-mips"
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
- select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_LITTLE_ENDIAN

config TARGET_MALTA
bool "Support malta"
@@ -28,98 +28,98 @@ config TARGET_MALTA
select DM_SERIAL
select DYNAMIC_IO_PORT_BASE
select MIPS_CM
+ select MIPS_L1_CACHE_SHIFT_6
select MIPS_L2_CACHE
select OF_CONTROL
select OF_ISA_BUS
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS32_R6
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
select SUPPORTS_CPU_MIPS64_R6
+ select SUPPORTS_LITTLE_ENDIAN
select SWAP_IO_SPACE
- select MIPS_L1_CACHE_SHIFT_6
- select ROM_EXCEPTION_VECTORS

config TARGET_VCT
bool "Support vct"
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS

config TARGET_DBAU1X00
bool "Support dbau1x00"
+ select MIPS_TUNE_4KC
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_4KC

config TARGET_PB1X00
bool "Support pb1x00"
- select SUPPORTS_LITTLE_ENDIAN
+ select MIPS_TUNE_4KC
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_4KC

config ARCH_ATH79
bool "Support QCA/Atheros ath79"
- select OF_CONTROL
select DM
+ select OF_CONTROL

config ARCH_BMIPS
bool "Support BMIPS SoCs"
- select OF_CONTROL
- select DM
select CLK
select CPU
+ select DM
+ select OF_CONTROL
select RAM
select SYSRESET

config MACH_PIC32
bool "Support Microchip PIC32"
- select OF_CONTROL
select DM
+ select OF_CONTROL

config TARGET_BOSTON
bool "Support Boston"
select DM
select DM_SERIAL
- select OF_CONTROL
select MIPS_CM
select MIPS_L1_CACHE_SHIFT_6
select MIPS_L2_CACHE
select OF_BOARD_SETUP
+ select OF_CONTROL
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS32_R6
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
select SUPPORTS_CPU_MIPS64_R6
- select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_LITTLE_ENDIAN

config TARGET_XILFPGA
bool "Support Imagination Xilfpga"
- select OF_CONTROL
select DM
- select DM_SERIAL
- select DM_GPIO
select DM_ETH
- select SUPPORTS_LITTLE_ENDIAN
- select SUPPORTS_CPU_MIPS32_R1
- select SUPPORTS_CPU_MIPS32_R2
+ select DM_GPIO
+ select DM_SERIAL
select MIPS_L1_CACHE_SHIFT_4
+ select OF_CONTROL
select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
help
This supports IMGTEC MIPSfpga platform

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 05d29d2fd95f..385a7a6e2172 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -26,8 +26,8 @@ config TARGET_MPC8308RDB

config TARGET_MPC8313ERDB
bool "Support MPC8313ERDB"
- select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select SUPPORT_SPL

config TARGET_MPC8315ERDB
bool "Support MPC8315ERDB"
@@ -42,10 +42,10 @@ config TARGET_MPC832XEMDS

config TARGET_MPC8349EMDS
bool "Support MPC8349EMDS"
+ select BOARD_EARLY_INIT_F
select SYS_FSL_DDR
- select SYS_FSL_HAS_DDR2
select SYS_FSL_DDR_BE
- select BOARD_EARLY_INIT_F
+ select SYS_FSL_HAS_DDR2

config TARGET_MPC8349ITX
bool "Support MPC8349ITX"
diff --git a/cmd/Kconfig b/cmd/Kconfig
index b359ac7118b0..e1c45eeb5ce4 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -152,8 +152,8 @@ config CMD_BDI

config CMD_CONFIG
bool "config"
- select BUILD_BIN2C
default SANDBOX
+ select BUILD_BIN2C
help
Print ".config" contents.

@@ -429,8 +429,8 @@ config CMD_BINOP

config CMD_CRC32
bool "crc32"
- select HASH
default y
+ select HASH
help
Compute CRC32.

@@ -737,9 +737,9 @@ config CMD_GPIO

config CMD_GPT
bool "GPT (GUID Partition Table) command"
- select PARTITION_UUIDS
select EFI_PARTITION
select HAVE_BLOCK_DEVICE
+ select PARTITION_UUIDS
imply RANDOM_UUID
help
Enable the 'gpt' command to ready and write GPT style partition
@@ -899,8 +899,8 @@ config CMD_ONENAND

config CMD_PART
bool "part"
- select PARTITION_UUIDS
select HAVE_BLOCK_DEVICE
+ select PARTITION_UUIDS
help
Read and display information about the partition table on
various media.
@@ -1797,10 +1797,10 @@ endmenu

config CMD_UBI
tristate "Enable UBI - Unsorted block images commands"
+ default y if NAND_SUNXI
+ select CMD_MTDPARTS
select CRC32
select MTD_UBI
- select CMD_MTDPARTS
- default y if NAND_SUNXI
help
UBI is a software layer above MTD layer which admits use of LVM-like
logical volumes on top of MTD devices, hides some complexities of
@@ -1812,9 +1812,9 @@ config CMD_UBI
config CMD_UBIFS
tristate "Enable UBIFS - Unsorted block images filesystem commands"
depends on CMD_UBI
+ default y if CMD_UBI
select CRC32
select LZO
- default y if CMD_UBI
help
UBIFS is a file system for flash devices which works on top of UBI.

--
1.9.1