[U-Boot] [PATCH v2 5/5] Kconfig: Sort bool, default, select and imply options

Michal Simek
2018-07-23T13:55:15Z

Another round of sorting Kconfig entries aplhabetically.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2: None

Kconfig | 22 ++++++++++-----------
arch/arc/Kconfig | 10 +++++-----
arch/arm/cpu/armv7/ls102xa/Kconfig | 10 +++++-----
arch/arm/cpu/armv8/Kconfig | 4 ++--
arch/arm/mach-davinci/Kconfig | 4 ++--
arch/arm/mach-exynos/Kconfig | 30 ++++++++++++++---------------
arch/arm/mach-imx/mx3/Kconfig | 2 +-
arch/arm/mach-mvebu/Kconfig | 6 +++---
arch/arm/mach-omap2/Kconfig | 6 +++---
arch/arm/mach-omap2/omap5/Kconfig | 12 ++++++------
arch/arm/mach-qemu/Kconfig | 2 +-
arch/arm/mach-rockchip/rk3288/Kconfig | 20 +++++++++----------
arch/arm/mach-socfpga/Kconfig | 4 ++--
arch/arm/mach-stm32/Kconfig | 20 +++++++++----------
arch/arm/mach-tegra/tegra124/Kconfig | 4 ++--
arch/arm/mach-uniphier/Kconfig | 8 ++++----
arch/mips/mach-ath79/Kconfig | 10 +++++-----
arch/mips/mach-bmips/Kconfig | 36 +++++++++++++++++------------------
arch/mips/mach-pic32/Kconfig | 6 +++---
arch/powerpc/Kconfig | 2 +-
20 files changed, 109 insertions(+), 109 deletions(-)

diff --git a/Kconfig b/Kconfig
index c8b86cd3843d..62235cae96cf 100644
--- a/Kconfig
+++ b/Kconfig
@@ -68,25 +68,25 @@ config CC_COVERAGE

config DISTRO_DEFAULTS
bool "Select defaults suitable for booting general purpose Linux distributions"
- imply USE_BOOTCOMMAND
- select CMD_BOOTZ if ARM && !ARM64
+ select AUTO_COMPLETE
+ select CMDLINE_EDITING
select CMD_BOOTI if ARM64
+ select CMD_BOOTZ if ARM && !ARM64
select CMD_DHCP if CMD_NET
- select CMD_PING if CMD_NET
- select CMD_PXE if NET
select CMD_ENV_EXISTS
select CMD_EXT2
select CMD_EXT4
select CMD_FAT
select CMD_FS_GENERIC
- imply CMD_MII if NET
select CMD_PART if PARTITIONS
+ select CMD_PING if CMD_NET
+ select CMD_PXE if NET
+ select ENV_VARS_UBOOT_CONFIG
select HUSH_PARSER
- select CMDLINE_EDITING
- select AUTO_COMPLETE
- select SYS_LONGHELP
select SUPPORT_RAW_INITRD
- select ENV_VARS_UBOOT_CONFIG
+ select SYS_LONGHELP
+ imply CMD_MII if NET
+ imply USE_BOOTCOMMAND
help
Select this to enable various options and commands which are suitable
for building u-boot for booting general purpose Linux distributions.
@@ -237,8 +237,8 @@ if FIT

config FIT_ENABLE_SHA256_SUPPORT
bool "Support SHA256 checksum of FIT image contents"
- select SHA256
default y
+ select SHA256
help
Enable this to support SHA256 checksum of FIT image contents. A
SHA256 checksum is a 256-bit (32-byte) hash value used to check that
@@ -252,8 +252,8 @@ config FIT_ENABLE_SHA256_SUPPORT
config FIT_SIGNATURE
bool "Enable signature verification of FIT uImages"
depends on DM
- select RSA
select HASH
+ select RSA
help
This option enables signature verification of FIT uImages,
using a hash signed and verified using RSA. If
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 6f139d5bdc52..d59aa3ae291e 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -31,36 +31,36 @@ choice

config CPU_ARC750D
bool "ARC 750D"
- select ARC_MMU_V2
depends on ISA_ARCOMPACT
+ select ARC_MMU_V2
help
Choose this option to build an U-Boot for ARC750D CPU.

config CPU_ARC770D
bool "ARC 770D"
- select ARC_MMU_V3
depends on ISA_ARCOMPACT
+ select ARC_MMU_V3
help
Choose this option to build an U-Boot for ARC770D CPU.

config CPU_ARCEM6
bool "ARC EM6"
- select ARC_MMU_ABSENT
depends on ISA_ARCV2
+ select ARC_MMU_ABSENT
help
Next Generation ARC Core based on ISA-v2 ISA without MMU.

config CPU_ARCHS36
bool "ARC HS36"
- select ARC_MMU_ABSENT
depends on ISA_ARCV2
+ select ARC_MMU_ABSENT
help
Next Generation ARC Core based on ISA-v2 ISA without MMU.

config CPU_ARCHS38
bool "ARC HS38"
- select ARC_MMU_V4
depends on ISA_ARCV2
+ select ARC_MMU_V4
help
Next Generation ARC Core based on ISA-v2 ISA with MMU.

diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 635358e32838..5d6a711c140c 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -1,5 +1,7 @@
config ARCH_LS1021A
bool
+ select SYS_FSL_DDR_BE if SYS_FSL_DDR
+ select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
select SYS_FSL_ERRATUM_A008378
select SYS_FSL_ERRATUM_A008407
select SYS_FSL_ERRATUM_A008997
@@ -10,18 +12,16 @@ config ARCH_LS1021A
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_HAS_CCI400
- select SYS_FSL_SRDS_1
- select SYS_HAS_SERDES
- select SYS_FSL_DDR_BE if SYS_FSL_DDR
- select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR
select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+ imply CMD_PCI
imply SCSI
imply SCSI_AHCI
- imply CMD_PCI

menu "LS102xA architecture"
depends on ARCH_LS1021A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 22d2f295487c..741e15c77378 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -44,8 +44,8 @@ config ARMV8_SPIN_TABLE
menu "ARMv8 secure monitor firmware"
config ARMV8_SEC_FIRMWARE_SUPPORT
bool "Enable ARMv8 secure monitor firmware framework support"
- select OF_LIBFDT
select FIT
+ select OF_LIBFDT
help
This framework is aimed at making secure monitor firmware load
process brief.
@@ -60,8 +60,8 @@ config ARMV8_SEC_FIRMWARE_SUPPORT

config SPL_ARMV8_SEC_FIRMWARE_SUPPORT
bool "Enable ARMv8 secure monitor firmware framework support for SPL"
- select SPL_OF_LIBFDT
select SPL_FIT
+ select SPL_OF_LIBFDT
help
Say Y here to support this framework in SPL phase.

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 5e7baba3fe49..12b1e682e6a2 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -18,9 +18,9 @@ config TARGET_DA850EVM

config TARGET_EA20
bool "EA20 board"
+ select BOARD_LATE_INIT
select MACH_DAVINCI_DA850_EVM
select SOC_DA850
- select BOARD_LATE_INIT

config TARGET_OMAPL138_LCDK
bool "OMAPL138 LCDK"
@@ -57,8 +57,8 @@ config SOC_DA850

config SOC_DA8XX
bool
- select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL
select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL
+ select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL

config MACH_DAVINCI_DA850_EVM
bool
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 65d9168ae2f3..ed04369cfae3 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -6,8 +6,8 @@ choice

config ARCH_EXYNOS4
bool "Exynos4 SoC family"
- select CPU_V7A
select BOARD_EARLY_INIT_F
+ select CPU_V7A
help
Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
are multiple SoCs in this family including Exynos4210, Exynos4412,
@@ -15,14 +15,14 @@ config ARCH_EXYNOS4

config ARCH_EXYNOS5
bool "Exynos5 SoC family"
- select CPU_V7A
select BOARD_EARLY_INIT_F
+ select CPU_V7A
select SHA_HW_ACCEL
- imply CRC32_VERIFY
imply CMD_HASH
+ imply CRC32_VERIFY
imply HASH_VERIFY
- imply USB_ETHER_RTL8152
imply USB_ETHER_ASIX
+ imply USB_ETHER_RTL8152
imply USB_ETHER_SMSC95XX
help
Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
@@ -46,9 +46,9 @@ choice
prompt "EXYNOS4 board select"

config TARGET_SMDKV310
- select SUPPORT_SPL
bool "Exynos4210 SMDKV310 board"
select OF_CONTROL
+ select SUPPORT_SPL

config TARGET_TRATS
bool "Exynos4210 Trats board"
@@ -93,39 +93,39 @@ config TARGET_ARNDALE
select ARM_ERRATA_774769
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL

config TARGET_SMDK5250
bool "SMDK5250 board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL

config TARGET_SNOW
bool "Snow board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL

config TARGET_SPRING
bool "Spring board"
- select SUPPORT_SPL
select OF_CONTROL
select SPL_DISABLE_OF_CONTROL
+ select SUPPORT_SPL

config TARGET_SMDK5420
bool "SMDK5420 board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL

config TARGET_PEACH_PI
bool "Peach Pi board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL

config TARGET_PEACH_PIT
bool "Peach Pit board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL

endchoice
endif
@@ -139,12 +139,12 @@ config TARGET_ESPRESSO7420
bool "ESPRESSO7420 board"
select ARM64
select ARMV8_MULTIENTRY
- select SUPPORT_SPL
+ select CLK_EXYNOS
select OF_CONTROL
- select SPL_DISABLE_OF_CONTROL
select PINCTRL
select PINCTRL_EXYNOS7420
- select CLK_EXYNOS
+ select SPL_DISABLE_OF_CONTROL
+ select SUPPORT_SPL

endchoice
endif
diff --git a/arch/arm/mach-imx/mx3/Kconfig b/arch/arm/mach-imx/mx3/Kconfig
index 6cc970fc4992..5028d5ea568a 100644
--- a/arch/arm/mach-imx/mx3/Kconfig
+++ b/arch/arm/mach-imx/mx3/Kconfig
@@ -9,9 +9,9 @@ choice

config TARGET_MX31PDK
bool "Support the i.MX31 PDK board from Freescale/NXP"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F

endchoice

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 5415b5a7bfe2..3df124c6a8ad 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -6,14 +6,14 @@ config HAVE_MVEBU_EFUSE

config ARMADA_32BIT
bool
+ select ARCH_MISC_INIT
+ select BOARD_EARLY_INIT_F
select CPU_V7A
- select SUPPORT_SPL
select SPL_DM
select SPL_DM_SEQ_ALIAS
select SPL_OF_CONTROL
select SPL_SIMPLE_BUS
- select BOARD_EARLY_INIT_F
- select ARCH_MISC_INIT
+ select SUPPORT_SPL

config ARMADA_64BIT
bool
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f4babc8d2600..76a19064c9b1 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -6,11 +6,11 @@ choice

config OMAP34XX
bool "OMAP34XX SoC"
+ select ARM_CORTEX_A8_CVE_2017_5715
select ARM_ERRATA_430973
select ARM_ERRATA_454179
select ARM_ERRATA_621766
select ARM_ERRATA_725233
- select ARM_CORTEX_A8_CVE_2017_5715
select USE_TINY_PRINTF
imply NAND_OMAP_GPMC
imply SPL_EXT_SUPPORT
@@ -52,9 +52,9 @@ config OMAP44XX

config OMAP54XX
bool "OMAP54XX SoC"
+ select ARM_CORTEX_A15_CVE_2017_5715
select ARM_ERRATA_798870
select SYS_THUMB_BUILD
- select ARM_CORTEX_A15_CVE_2017_5715
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SPL_DISPLAY_PRINT
@@ -116,8 +116,8 @@ config AM43XX

config AM33XX
bool "AM33XX SoC"
- select SPECIFY_CONSOLE_INDEX
select ARM_CORTEX_A8_CVE_2017_5715
+ select SPECIFY_CONSOLE_INDEX
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SPL_NAND_AM33XX_BCH
diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig
index deb9873cc537..f083a4a385c5 100644
--- a/arch/arm/mach-omap2/omap5/Kconfig
+++ b/arch/arm/mach-omap2/omap5/Kconfig
@@ -23,26 +23,26 @@ config TARGET_DRA7XX_EVM
bool "TI DRA7XX"
select BOARD_LATE_INIT
select DRA7XX
- select TI_I2C_BOARD_DETECT
select PHYS_64BIT
- imply SCSI
+ select TI_I2C_BOARD_DETECT
imply DM_PMIC
- imply PMIC_LP87565
imply DM_REGULATOR
imply DM_REGULATOR_LP87565
- imply SPL_THERMAL
imply DM_THERMAL
+ imply PMIC_LP87565
+ imply SCSI
+ imply SPL_THERMAL
imply TI_DRA7_THERMAL

config TARGET_AM57XX_EVM
bool "AM57XX"
select BOARD_LATE_INIT
+ select CMD_DDR3
select DRA7XX
select TI_I2C_BOARD_DETECT
- select CMD_DDR3
+ imply DM_THERMAL
imply SCSI
imply SPL_THERMAL
- imply DM_THERMAL
imply TI_DRA7_THERMAL

endchoice
diff --git a/arch/arm/mach-qemu/Kconfig b/arch/arm/mach-qemu/Kconfig
index 726f8a7d3140..a2e4b98b8887 100644
--- a/arch/arm/mach-qemu/Kconfig
+++ b/arch/arm/mach-qemu/Kconfig
@@ -14,8 +14,8 @@ endif
config TARGET_QEMU_ARM_32BIT
bool "Support qemu_arm"
depends on ARCH_QEMU
- select CPU_V7A
select ARCH_SUPPORT_PSCI
+ select CPU_V7A
select SYS_ARCH_TIMER

config TARGET_QEMU_ARM_64BIT
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index 6beb26fd7a68..b5447e5b6587 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -87,22 +87,22 @@ config TARGET_POPMETAL_RK3288
config TARGET_VYASA_RK3288
bool "Vyasa-RK3288"
select BOARD_LATE_INIT
- select TPL
+ select ROCKCHIP_BROM_HELPER
select SUPPORT_TPL
- select TPL_DM
- select TPL_REGMAP
- select TPL_SYSCON
- select TPL_CLK
- select TPL_RAM
- select TPL_OF_PLATDATA
- select TPL_OF_CONTROL
+ select TPL
select TPL_BOOTROM_SUPPORT
- select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
- select ROCKCHIP_BROM_HELPER
+ select TPL_CLK
+ select TPL_DM
select TPL_DRIVERS_MISC_SUPPORT
select TPL_LIBCOMMON_SUPPORT
select TPL_LIBGENERIC_SUPPORT
+ select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
+ select TPL_OF_CONTROL
+ select TPL_OF_PLATDATA
+ select TPL_RAM
+ select TPL_REGMAP
select TPL_SERIAL_SUPPORT
+ select TPL_SYSCON
help
Vyasa is a RK3288-based development board with 2 USB ports,
HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 91ea742f3b10..5c1df2cf1f81 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -9,8 +9,8 @@ config TARGET_SOCFPGA_ARRIA5

config TARGET_SOCFPGA_ARRIA10
bool
- select SPL_BOARD_INIT if SPL
select ALTERA_SDRAM
+ select SPL_BOARD_INIT if SPL

config TARGET_SOCFPGA_CYCLONE5
bool
@@ -23,8 +23,8 @@ config TARGET_SOCFPGA_GEN5
config TARGET_SOCFPGA_STRATIX10
bool
select ARMV8_MULTIENTRY
- select ARMV8_SPIN_TABLE
select ARMV8_SET_SMPEN
+ select ARMV8_SPIN_TABLE

choice
prompt "Altera SOCFPGA board select"
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index a45f3fd77a75..cea5ee2ce54a 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -9,9 +9,9 @@ config STM32F4
select PINCTRL
select PINCTRL_STM32
select RAM
- select STM32_SDRAM
select STM32_RCC
select STM32_RESET
+ select STM32_SDRAM
select STM32_SERIAL
select STM32_TIMER
select TIMER
@@ -25,13 +25,6 @@ config STM32F7
select PINCTRL
select PINCTRL_STM32
select RAM
- select STM32_SDRAM
- select STM32_RCC
- select STM32_RESET
- select STM32_SERIAL
- select STM32_TIMER
- select TIMER
- select SUPPORT_SPL
select SPL
select SPL_BOARD_INIT
select SPL_CLK
@@ -46,13 +39,20 @@ config STM32F7
select SPL_OF_CONTROL
select SPL_OF_LIBFDT
select SPL_OF_TRANSLATE
- imply SPL_OS_BOOT
select SPL_PINCTRL
select SPL_RAM
select SPL_SERIAL_SUPPORT
select SPL_SYS_MALLOC_SIMPLE
select SPL_TIMER
select SPL_XIP_SUPPORT
+ select STM32_RCC
+ select STM32_RESET
+ select STM32_SDRAM
+ select STM32_SERIAL
+ select STM32_TIMER
+ select SUPPORT_SPL
+ select TIMER
+ imply SPL_OS_BOOT

config STM32H7
bool "stm32h7 family"
@@ -64,9 +64,9 @@ config STM32H7
select PINCTRL_STM32
select RAM
select REGMAP
- select STM32_SDRAM
select STM32_RCC
select STM32_RESET
+ select STM32_SDRAM
select STM32_SERIAL
select STM32_TIMER
select SYSCON
diff --git a/arch/arm/mach-tegra/tegra124/Kconfig b/arch/arm/mach-tegra/tegra124/Kconfig
index a07add68fd20..6fa31ea0a16c 100644
--- a/arch/arm/mach-tegra/tegra124/Kconfig
+++ b/arch/arm/mach-tegra/tegra124/Kconfig
@@ -6,16 +6,16 @@ choice

config TARGET_APALIS_TK1
bool "Toradex Apalis TK1 module"
+ select ARCH_SUPPORT_PSCI
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select ARCH_SUPPORT_PSCI

config TARGET_JETSON_TK1
bool "NVIDIA Tegra124 Jetson TK1 board"
+ select ARCH_SUPPORT_PSCI
select BOARD_LATE_INIT
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select ARCH_SUPPORT_PSCI

config TARGET_CEI_TK1_SOM
bool "Colorado Engineering Inc Tegra124 TK1-som board"
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 91bea776e6cb..bfb445a60296 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -5,10 +5,10 @@ config SYS_CONFIG_NAME

config ARCH_UNIPHIER_32BIT
bool
+ select ARCH_SUPPORT_PSCI
+ select ARMV7_NONSEC
select CPU_V7A
select CPU_V7_HAS_NONSEC
- select ARMV7_NONSEC
- select ARCH_SUPPORT_PSCI

choice
prompt "UniPhier SoC select"
@@ -68,8 +68,8 @@ config ARCH_UNIPHIER_LD11
config ARCH_UNIPHIER_LD20
bool "Enable UniPhier LD20 SoC support"
depends on ARCH_UNIPHIER_V8_MULTI
- select OF_BOARD_SETUP
default y
+ select OF_BOARD_SETUP

config ARCH_UNIPHIER_PXS3
bool "Enable UniPhier PXs3 SoC support"
@@ -79,8 +79,8 @@ config ARCH_UNIPHIER_PXS3
config CACHE_UNIPHIER
bool "Enable the UniPhier L2 cache controller"
depends on ARCH_UNIPHIER_32BIT
- select SYS_CACHE_SHIFT_7
default y
+ select SYS_CACHE_SHIFT_7
help
This option allows to use the UniPhier System Cache as L2 cache.

diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index d982b0f8e697..bc86f591df83 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -6,30 +6,30 @@ config SYS_SOC

config SOC_AR933X
bool
+ select MIPS_TUNE_24KC
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_24KC
help
This supports QCA/Atheros ar933x family SOCs.

config SOC_AR934X
bool
+ select MIPS_TUNE_74KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
- select MIPS_TUNE_74KC
help
This supports QCA/Atheros ar934x family SOCs.

config SOC_QCA953X
bool
+ select MIPS_TUNE_24KC
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_24KC
help
This supports QCA/Atheros qca953x family SOCs.

diff --git a/arch/mips/mach-bmips/Kconfig b/arch/mips/mach-bmips/Kconfig
index 10900bf6045a..5968d5345ed7 100644
--- a/arch/mips/mach-bmips/Kconfig
+++ b/arch/mips/mach-bmips/Kconfig
@@ -20,10 +20,10 @@ choice

config SOC_BMIPS_BCM3380
bool "BMIPS BCM3380 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_WATCHDOG
help
@@ -31,10 +31,10 @@ config SOC_BMIPS_BCM3380

config SOC_BMIPS_BCM6318
bool "BMIPS BCM6318 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
@@ -42,10 +42,10 @@ config SOC_BMIPS_BCM6318

config SOC_BMIPS_BCM6328
bool "BMIPS BCM6328 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
@@ -53,10 +53,10 @@ config SOC_BMIPS_BCM6328

config SOC_BMIPS_BCM6338
bool "BMIPS BCM6338 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
@@ -64,10 +64,10 @@ config SOC_BMIPS_BCM6338

config SOC_BMIPS_BCM6348
bool "BMIPS BCM6348 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_WATCHDOG
help
@@ -75,10 +75,10 @@ config SOC_BMIPS_BCM6348

config SOC_BMIPS_BCM6358
bool "BMIPS BCM6358 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
@@ -86,10 +86,10 @@ config SOC_BMIPS_BCM6358

config SOC_BMIPS_BCM6368
bool "BMIPS BCM6368 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
@@ -97,10 +97,10 @@ config SOC_BMIPS_BCM6368

config SOC_BMIPS_BCM6362
bool "BMIPS BCM6362 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
@@ -108,10 +108,10 @@ config SOC_BMIPS_BCM6362

config SOC_BMIPS_BCM63268
bool "BMIPS BCM63268 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig
index 8fad4cff9126..5f13bf14ed6b 100644
--- a/arch/mips/mach-pic32/Kconfig
+++ b/arch/mips/mach-pic32/Kconfig
@@ -9,12 +9,12 @@ choice

config SOC_PIC32MZDA
bool "Microchip PIC32MZ[DA] family"
- select SUPPORTS_LITTLE_ENDIAN
+ select MIPS_L1_CACHE_SHIFT_4
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
- select MIPS_L1_CACHE_SHIFT_4
+ select SUPPORTS_LITTLE_ENDIAN
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
help
This supports Microchip PIC32MZ[DA] family of microcontrollers.

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 13a79560b24b..8faef0ba9fc3 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -20,9 +20,9 @@ config MPC85xx
select CREATE_ARCH_SYMLINK
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
- imply USB_EHCI_HCD if USB
imply CMD_HASH
imply CMD_IRQ
+ imply USB_EHCI_HCD if USB

config MPC86xx
bool "MPC86xx"
--
1.9.1