From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/53] clk: Add Allwinner CLK, RESET support
Date: Fri, 10 Aug 2018 11:36:18 +0530 [thread overview]
Message-ID: <20180810060711.6547-1-jagan@amarulasolutions.com> (raw)
This series is refined version of Allwinner CLK, RESET
support for previous RFC[3] which implements CLK and RESET for
- USB
- MMC
- SPI
- UART
- Ethernet
This series depends on 'musb shutdown' series [1] and
Linux dts(i) sync series [2].
Since this series supporting MMC, the previous version[4]
DM_MMC migration changes are squashed and droped reset and
clock ccm hacks.
Tested on A64, H3, H5, R40, A83T, A20.
Changes for v2:
- Fixed few warnings and spaces in reset descriptor table.
- Add Ethernet CLK and RESET changes
Note:
- added previous version fastboot, env changes as-it-is,
so-that we can discuss it further.
- V3S, A23, A33 still need to test.
All these changes available at u-boot-sunxi/clk
Any inputs,
Jagan.
[1] https://patchwork.ozlabs.org/cover/946738/
[2] https://patchwork.ozlabs.org/cover/955563/
[3] https://patchwork.ozlabs.org/cover/944313/
[4] https://patchwork.ozlabs.org/cover/944180/
Jagan Teki (53):
clk: Kconfig: Ascending order to sub directiory kconfigs
clk: Add Allwinner A64 CLK driver
reset: Add default request ops
reset: Add Allwinner RESET driver
clk: sunxi: Add Allwinner H3/H5 CLK driver
clk: sunxi: Add Allwinner A10/A20 CLK driver
clk: sunxi: Add Allwinner A10s/A13 CLK driver
clk: sunxi: Add Allwinner A31 CLK driver
clk: sunxi: Add Allwinner A23 CLK driver
clk: sunxi: a23: Add CLK support for A33
clk: sunxi: Add Allwinner A83T CLK driver
clk: sunxi: Add Allwinner R40 CLK driver
clk: sunxi: Add Allwinner V3S CLK driver
sunxi: Enable CLK
musb-new: sunxi: Use CLK and RESET support
phy: sun4i-usb: Use CLK and RESET support
sunxi: usb: Switch to Generic host controllers
usb: host: Drop [e-o]hci-sunxi drivers
clk: sunxi: Implement AHB bus MMC clocks
clk: sunxi: Implement direct MMC clocks
clk: sunxi: Implement AHB bus MMC resets
reset: Add get reset by name optionally
reset: Add reset valid
dm: mmc: sunxi: Add CLK and RESET support
fastboot: sunxi: Update fastboot mmc default device
env: sunxi: Update default env fat device
sunxi: Use mmc_bootdev=2 for MMC2 boot
sunxi: A20: Enable DM_MMC
mmc: sunxi: Add mmc, emmc H5/A64 compatible
sunxi: H3_H5: Enable DM_MMC
sunxi: A64: Enable DM_MMC
mmc: sunxi: Add A83T emmc compatible
sunxi: A83T: Enable DM_MMC
sunxi: V40: Enable DM_MMC
sunxi: A13/A31: Enable DM_MMC
sunxi: A23/A33/V3S: Enable DM_MMC
clk: sunxi: Implement SPI clocks
clk: sunxi: Implement SPI resets
spi: sun4i: Add CLK support
spi: Add Allwinner A31 SPI driver
clk: sunxi: Implement UART clocks
clk: sunxi: Implement UART resets
clk: sunxi: Implement Ethernet clocks
clk: sunxi: Implement Ethernet resets
net: sunxi_emac: Add CLK support
net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle
net: sun8i_emac: Add CLK and RESET support
clk: Get the CLK by index without device
clk: Use clk_get_by_index_tail()
reset: Get the RESET by index without device
clk: sunxi: h3: Implement EPHY CLK and RESET
net: sun8i_emac: Add EPHY CLK and RESET support
board: sunxi: gmac: Remove Ethernet clock and reset
arch/arm/include/asm/arch-sunxi/ccu.h | 82 +++
arch/arm/mach-sunxi/Kconfig | 22 +
board/sunxi/board.c | 2 +-
board/sunxi/gmac.c | 8 -
configs/A10-OLinuXino-Lime_defconfig | 1 +
configs/A10s-OLinuXino-M_defconfig | 1 +
configs/A13-OLinuXinoM_defconfig | 1 +
configs/A13-OLinuXino_defconfig | 1 +
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 3 +
configs/A20-OLinuXino-Lime2_defconfig | 1 +
configs/A20-OLinuXino-Lime_defconfig | 1 +
configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 +
configs/A20-OLinuXino_MICRO_defconfig | 1 +
configs/A20-Olimex-SOM-EVB_defconfig | 1 +
configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 1 +
configs/A20-Olimex-SOM204-EVB_defconfig | 2 +
configs/Auxtek-T003_defconfig | 1 +
configs/Auxtek-T004_defconfig | 1 +
configs/Bananapi_defconfig | 1 +
configs/Bananapi_m2m_defconfig | 1 +
configs/Bananapro_defconfig | 1 +
configs/CHIP_defconfig | 1 +
configs/CHIP_pro_defconfig | 1 +
configs/CSQ_CS908_defconfig | 1 +
configs/Colombus_defconfig | 1 +
configs/Cubieboard2_defconfig | 1 +
configs/Cubieboard_defconfig | 1 +
configs/Cubietruck_plus_defconfig | 1 +
configs/Hummingbird_A31_defconfig | 1 +
configs/Itead_Ibox_A20_defconfig | 1 +
configs/Linksprite_pcDuino3_Nano_defconfig | 1 +
configs/Linksprite_pcDuino3_defconfig | 1 +
configs/Linksprite_pcDuino_defconfig | 1 +
configs/MK808C_defconfig | 1 +
configs/Marsboard_A10_defconfig | 1 +
configs/Mele_A1000G_quad_defconfig | 1 +
configs/Mele_A1000_defconfig | 1 +
configs/Mele_I7_defconfig | 1 +
configs/Mele_M3_defconfig | 2 +
configs/Mele_M5_defconfig | 1 +
configs/Mele_M9_defconfig | 1 +
configs/Mini-X_defconfig | 1 +
configs/Orangepi_defconfig | 1 +
configs/Orangepi_mini_defconfig | 2 +
configs/Sinlinx_SinA31s_defconfig | 1 +
configs/Sinlinx_SinA33_defconfig | 3 +
configs/Sinovoip_BPI_M2_Plus_defconfig | 1 +
configs/Sinovoip_BPI_M2_defconfig | 1 +
configs/Sinovoip_BPI_M3_defconfig | 1 +
configs/Wexler_TAB7200_defconfig | 1 +
configs/Wobo_i5_defconfig | 1 +
configs/Yones_Toptech_BD1078_defconfig | 1 +
configs/a64-olinuxino_defconfig | 1 +
configs/amarula_a64_relic_defconfig | 2 +
configs/ba10_tv_box_defconfig | 1 +
configs/bananapi_m1_plus_defconfig | 1 +
configs/bananapi_m64_defconfig | 1 +
configs/ga10h_v1_1_defconfig | 1 +
configs/h8_homlet_v2_defconfig | 1 +
configs/i12-tvbox_defconfig | 1 +
configs/icnova-a20-swac_defconfig | 1 +
configs/inet1_defconfig | 1 +
configs/inet_q972_defconfig | 1 +
configs/jesurun_q5_defconfig | 1 +
configs/libretech_all_h3_cc_h2_plus_defconfig | 1 +
configs/libretech_all_h3_cc_h3_defconfig | 1 +
configs/libretech_all_h3_cc_h5_defconfig | 1 +
configs/mixtile_loftq_defconfig | 1 +
configs/mk802_a10s_defconfig | 1 +
configs/mk802_defconfig | 1 +
configs/mk802ii_defconfig | 1 +
configs/nanopi_a64_defconfig | 1 +
configs/nanopi_m1_defconfig | 1 +
configs/nanopi_m1_plus_defconfig | 1 +
configs/nanopi_neo2_defconfig | 1 +
configs/nanopi_neo_air_defconfig | 1 +
configs/nanopi_neo_defconfig | 1 +
configs/nanopi_neo_plus2_defconfig | 1 +
configs/orangepi_2_defconfig | 1 +
configs/orangepi_lite_defconfig | 1 +
configs/orangepi_one_defconfig | 1 +
configs/orangepi_pc2_defconfig | 1 +
configs/orangepi_pc_defconfig | 1 +
configs/orangepi_pc_plus_defconfig | 1 +
configs/orangepi_plus2e_defconfig | 1 +
configs/orangepi_plus_defconfig | 1 +
configs/orangepi_prime_defconfig | 1 +
configs/orangepi_r1_defconfig | 1 +
configs/orangepi_win_defconfig | 1 +
configs/orangepi_zero_defconfig | 1 +
configs/orangepi_zero_plus2_defconfig | 1 +
configs/orangepi_zero_plus_defconfig | 1 +
configs/parrot_r16_defconfig | 1 +
configs/pine64_plus_defconfig | 1 +
configs/r7-tv-dongle_defconfig | 1 +
configs/sopine_baseboard_defconfig | 1 +
configs/sun8i_a23_evb_defconfig | 1 +
configs/sunxi_Gemei_G9_defconfig | 1 +
configs/tbs_a711_defconfig | 1 +
drivers/clk/Kconfig | 9 +-
drivers/clk/Makefile | 1 +
drivers/clk/clk-uclass.c | 84 +++-
drivers/clk/sunxi/Kconfig | 75 +++
drivers/clk/sunxi/Makefile | 17 +
drivers/clk/sunxi/clk_a10.c | 107 ++++
drivers/clk/sunxi/clk_a10s.c | 96 ++++
drivers/clk/sunxi/clk_a23.c | 105 ++++
drivers/clk/sunxi/clk_a31.c | 128 +++++
drivers/clk/sunxi/clk_a64.c | 115 +++++
drivers/clk/sunxi/clk_a83t.c | 105 ++++
drivers/clk/sunxi/clk_h3.c | 130 +++++
drivers/clk/sunxi/clk_r40.c | 123 +++++
drivers/clk/sunxi/clk_sunxi.c | 77 +++
drivers/clk/sunxi/clk_v3s.c | 91 ++++
drivers/fastboot/Kconfig | 3 +-
drivers/mmc/sunxi_mmc.c | 121 +++--
drivers/net/sun8i_emac.c | 179 ++++---
drivers/net/sunxi_emac.c | 28 +-
drivers/phy/allwinner/phy-sun4i-usb.c | 77 ++-
drivers/reset/Kconfig | 8 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-sunxi.c | 124 +++++
drivers/reset/reset-uclass.c | 81 ++-
drivers/spi/Kconfig | 6 +
drivers/spi/Makefile | 1 +
drivers/spi/sun4i_spi.c | 40 +-
drivers/spi/sun6i_spi.c | 475 ++++++++++++++++++
drivers/usb/host/Kconfig | 2 +
drivers/usb/host/Makefile | 2 -
drivers/usb/host/ehci-sunxi.c | 204 --------
drivers/usb/host/ohci-sunxi.c | 233 ---------
drivers/usb/musb-new/sunxi.c | 82 +--
env/Kconfig | 3 +-
include/clk.h | 15 +
include/configs/sun4i.h | 4 -
include/configs/sun50i.h | 5 -
include/configs/sun5i.h | 4 -
include/configs/sun6i.h | 4 -
include/configs/sun7i.h | 4 -
include/configs/sun8i.h | 4 -
include/configs/sunxi-common.h | 5 +-
include/reset.h | 52 ++
scripts/config_whitelist.txt | 2 -
143 files changed, 2566 insertions(+), 683 deletions(-)
create mode 100644 arch/arm/include/asm/arch-sunxi/ccu.h
create mode 100644 drivers/clk/sunxi/Kconfig
create mode 100644 drivers/clk/sunxi/Makefile
create mode 100644 drivers/clk/sunxi/clk_a10.c
create mode 100644 drivers/clk/sunxi/clk_a10s.c
create mode 100644 drivers/clk/sunxi/clk_a23.c
create mode 100644 drivers/clk/sunxi/clk_a31.c
create mode 100644 drivers/clk/sunxi/clk_a64.c
create mode 100644 drivers/clk/sunxi/clk_a83t.c
create mode 100644 drivers/clk/sunxi/clk_h3.c
create mode 100644 drivers/clk/sunxi/clk_r40.c
create mode 100644 drivers/clk/sunxi/clk_sunxi.c
create mode 100644 drivers/clk/sunxi/clk_v3s.c
create mode 100644 drivers/reset/reset-sunxi.c
create mode 100644 drivers/spi/sun6i_spi.c
delete mode 100644 drivers/usb/host/ehci-sunxi.c
delete mode 100644 drivers/usb/host/ohci-sunxi.c
--
2.18.0.321.gffc6fa0e3
next reply other threads:[~2018-08-10 6:06 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-10 6:06 Jagan Teki [this message]
2018-08-10 6:06 ` [U-Boot] [PATCH v2 01/53] clk: Kconfig: Ascending order to sub directiory kconfigs Jagan Teki
2018-08-13 10:34 ` Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 02/53] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 03/53] reset: Add default request ops Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 04/53] reset: Add Allwinner RESET driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 05/53] clk: sunxi: Add Allwinner H3/H5 CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 06/53] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 07/53] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 08/53] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 09/53] clk: sunxi: Add Allwinner A23 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 10/53] clk: sunxi: a23: Add CLK support for A33 Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 11/53] clk: sunxi: Add Allwinner A83T CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 12/53] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 13/53] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 14/53] sunxi: Enable CLK Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 15/53] musb-new: sunxi: Use CLK and RESET support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 16/53] phy: sun4i-usb: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 17/53] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 18/53] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 19/53] clk: sunxi: Implement AHB bus MMC clocks Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 20/53] clk: sunxi: Implement direct " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 21/53] clk: sunxi: Implement AHB bus MMC resets Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 22/53] reset: Add get reset by name optionally Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 23/53] reset: Add reset valid Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 24/53] dm: mmc: sunxi: Add CLK and RESET support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 25/53] fastboot: sunxi: Update fastboot mmc default device Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 26/53] env: sunxi: Update default env fat device Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 27/53] sunxi: Use mmc_bootdev=2 for MMC2 boot Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 28/53] sunxi: A20: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 29/53] mmc: sunxi: Add mmc, emmc H5/A64 compatible Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 30/53] sunxi: H3_H5: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 31/53] sunxi: A64: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 32/53] mmc: sunxi: Add A83T emmc compatible Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 33/53] sunxi: A83T: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 34/53] sunxi: V40: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 35/53] sunxi: A13/A31: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 36/53] sunxi: A23/A33/V3S: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 37/53] clk: sunxi: Implement SPI clocks Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 38/53] clk: sunxi: Implement SPI resets Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 39/53] spi: sun4i: Add CLK support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 40/53] spi: Add Allwinner A31 SPI driver Jagan Teki
2018-08-11 0:38 ` Fahad Sadah
2018-08-10 6:06 ` [U-Boot] [PATCH v2 41/53] clk: sunxi: Implement UART clocks Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 42/53] clk: sunxi: Implement UART resets Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 43/53] clk: sunxi: Implement Ethernet clocks Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 44/53] clk: sunxi: Implement Ethernet resets Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 45/53] net: sunxi_emac: Add CLK support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 46/53] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 47/53] net: sun8i_emac: Add CLK and RESET support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 48/53] clk: Get the CLK by index without device Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 49/53] clk: Use clk_get_by_index_tail() Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 50/53] reset: Get the RESET by index without device Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 51/53] clk: sunxi: h3: Implement EPHY CLK and RESET Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 52/53] net: sun8i_emac: Add EPHY CLK and RESET support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 53/53] board: sunxi: gmac: Remove Ethernet clock and reset Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180810060711.6547-1-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox