From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 09/53] clk: sunxi: Add Allwinner A23 CLK driver
Date: Fri, 10 Aug 2018 11:36:27 +0530 [thread overview]
Message-ID: <20180810060711.6547-10-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180810060711.6547-1-jagan@amarulasolutions.com>
Add initial clock driver for Allwinner A23.
- Implement USB bus and USB clocks via ccu_clk_map descriptor
for A23, so it can accessed in common clk enable and disable
functions from clk_sunxi.c
- Implement USB bus and USB resets via ccu_reset_map descriptor
for A23, so it can accessed in common reset deassert and assert
functions from reset-sunxi.c
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/clk/sunxi/Kconfig | 7 ++++
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/clk_a23.c | 79 +++++++++++++++++++++++++++++++++++++
3 files changed, 87 insertions(+)
create mode 100644 drivers/clk/sunxi/clk_a23.c
diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
index 535b0dc02c..54600e8e1f 100644
--- a/drivers/clk/sunxi/Kconfig
+++ b/drivers/clk/sunxi/Kconfig
@@ -30,6 +30,13 @@ config CLK_SUN6I_A31
This enables common clock driver support for platforms based
on Allwinner A31/A31s SoC.
+config CLK_SUN8I_A23
+ bool "Clock driver for Allwinner A23"
+ default MACH_SUN8I_A23
+ help
+ This enables common clock driver support for platforms based
+ on Allwinner A23 SoC.
+
config CLK_SUN8I_H3
bool "Clock driver for Allwinner H3/H5"
default MACH_SUNXI_H3_H5
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 3cf0071b0c..6924897036 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -9,5 +9,6 @@ obj-$(CONFIG_CLK_SUNXI) += clk_sunxi.o
obj-$(CONFIG_CLK_SUN4I_A10) += clk_a10.o
obj-$(CONFIG_CLK_SUN5I_A10S) += clk_a10s.o
obj-$(CONFIG_CLK_SUN6I_A31) += clk_a31.o
+obj-$(CONFIG_CLK_SUN8I_A23) += clk_a23.o
obj-$(CONFIG_CLK_SUN8I_H3) += clk_h3.o
obj-$(CONFIG_CLK_SUN50I_A64) += clk_a64.o
diff --git a/drivers/clk/sunxi/clk_a23.c b/drivers/clk/sunxi/clk_a23.c
new file mode 100644
index 0000000000..799c8ac0aa
--- /dev/null
+++ b/drivers/clk/sunxi/clk_a23.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/arch/ccu.h>
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+static struct ccu_clk_map a23_clks[] = {
+ [CLK_BUS_OTG] = { 0x060, BIT(24), NULL },
+ [CLK_BUS_EHCI] = { 0x060, BIT(26), NULL },
+ [CLK_BUS_OHCI] = { 0x060, BIT(29), NULL },
+
+ [CLK_USB_PHY0] = { 0x0cc, BIT(8), NULL },
+ [CLK_USB_PHY1] = { 0x0cc, BIT(9), NULL },
+ [CLK_USB_HSIC] = { 0x0cc, BIT(10), NULL },
+ [CLK_USB_HSIC_12M] = { 0x0cc, BIT(11), NULL },
+ [CLK_USB_OHCI] = { 0x0cc, BIT(16), NULL },
+};
+
+static struct ccu_reset_map a23_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_HSIC] = { 0x0cc, BIT(2) },
+
+ [RST_BUS_OTG] = { 0x2c0, BIT(24) },
+ [RST_BUS_EHCI] = { 0x2c0, BIT(26) },
+ [RST_BUS_OHCI] = { 0x2c0, BIT(29) },
+};
+
+static const struct ccu_desc sun8i_a23_ccu_desc = {
+ .clks = a23_clks,
+ .num_clks = ARRAY_SIZE(a23_clks),
+
+ .resets = a23_resets,
+ .num_resets = ARRAY_SIZE(a23_resets),
+};
+
+static int a23_clk_probe(struct udevice *dev)
+{
+ struct sunxi_clk_priv *priv = dev_get_priv(dev);
+
+ priv->base = dev_read_addr_ptr(dev);
+ if (!priv->base)
+ return -ENOMEM;
+
+ priv->desc = (const struct ccu_desc *)dev_get_driver_data(dev);
+ if (!priv->desc)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int a23_clk_bind(struct udevice *dev)
+{
+ return sunxi_reset_bind(dev, 39);
+}
+
+static const struct udevice_id a23_clk_ids[] = {
+ { .compatible = "allwinner,sun8i-a23-ccu",
+ .data = (ulong)&sun8i_a23_ccu_desc },
+ { }
+};
+
+U_BOOT_DRIVER(clk_sun8i_a23) = {
+ .name = "sun8i_a23_ccu",
+ .id = UCLASS_CLK,
+ .of_match = a23_clk_ids,
+ .priv_auto_alloc_size = sizeof(struct sunxi_clk_priv),
+ .ops = &sunxi_clk_ops,
+ .probe = a23_clk_probe,
+ .bind = a23_clk_bind,
+};
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2018-08-10 6:06 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-10 6:06 [U-Boot] [PATCH v2 00/53] clk: Add Allwinner CLK, RESET support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 01/53] clk: Kconfig: Ascending order to sub directiory kconfigs Jagan Teki
2018-08-13 10:34 ` Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 02/53] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 03/53] reset: Add default request ops Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 04/53] reset: Add Allwinner RESET driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 05/53] clk: sunxi: Add Allwinner H3/H5 CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 06/53] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 07/53] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 08/53] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-08-10 6:06 ` Jagan Teki [this message]
2018-08-10 6:06 ` [U-Boot] [PATCH v2 10/53] clk: sunxi: a23: Add CLK support for A33 Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 11/53] clk: sunxi: Add Allwinner A83T CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 12/53] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 13/53] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 14/53] sunxi: Enable CLK Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 15/53] musb-new: sunxi: Use CLK and RESET support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 16/53] phy: sun4i-usb: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 17/53] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 18/53] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 19/53] clk: sunxi: Implement AHB bus MMC clocks Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 20/53] clk: sunxi: Implement direct " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 21/53] clk: sunxi: Implement AHB bus MMC resets Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 22/53] reset: Add get reset by name optionally Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 23/53] reset: Add reset valid Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 24/53] dm: mmc: sunxi: Add CLK and RESET support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 25/53] fastboot: sunxi: Update fastboot mmc default device Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 26/53] env: sunxi: Update default env fat device Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 27/53] sunxi: Use mmc_bootdev=2 for MMC2 boot Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 28/53] sunxi: A20: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 29/53] mmc: sunxi: Add mmc, emmc H5/A64 compatible Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 30/53] sunxi: H3_H5: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 31/53] sunxi: A64: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 32/53] mmc: sunxi: Add A83T emmc compatible Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 33/53] sunxi: A83T: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 34/53] sunxi: V40: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 35/53] sunxi: A13/A31: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 36/53] sunxi: A23/A33/V3S: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 37/53] clk: sunxi: Implement SPI clocks Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 38/53] clk: sunxi: Implement SPI resets Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 39/53] spi: sun4i: Add CLK support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 40/53] spi: Add Allwinner A31 SPI driver Jagan Teki
2018-08-11 0:38 ` Fahad Sadah
2018-08-10 6:06 ` [U-Boot] [PATCH v2 41/53] clk: sunxi: Implement UART clocks Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 42/53] clk: sunxi: Implement UART resets Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 43/53] clk: sunxi: Implement Ethernet clocks Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 44/53] clk: sunxi: Implement Ethernet resets Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 45/53] net: sunxi_emac: Add CLK support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 46/53] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 47/53] net: sun8i_emac: Add CLK and RESET support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 48/53] clk: Get the CLK by index without device Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 49/53] clk: Use clk_get_by_index_tail() Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 50/53] reset: Get the RESET by index without device Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 51/53] clk: sunxi: h3: Implement EPHY CLK and RESET Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 52/53] net: sun8i_emac: Add EPHY CLK and RESET support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 53/53] board: sunxi: gmac: Remove Ethernet clock and reset Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180810060711.6547-10-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox