public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 21/53] clk: sunxi: Implement AHB bus MMC resets
Date: Fri, 10 Aug 2018 11:36:39 +0530	[thread overview]
Message-ID: <20180810060711.6547-22-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180810060711.6547-1-jagan@amarulasolutions.com>

Implement AHB bus MMC resets for all Allwinner SoC
clock drivers via reset map descriptor table.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/clk/sunxi/clk_a23.c  | 3 +++
 drivers/clk/sunxi/clk_a31.c  | 4 ++++
 drivers/clk/sunxi/clk_a64.c  | 3 +++
 drivers/clk/sunxi/clk_a83t.c | 3 +++
 drivers/clk/sunxi/clk_h3.c   | 3 +++
 drivers/clk/sunxi/clk_r40.c  | 4 ++++
 drivers/clk/sunxi/clk_v3s.c  | 3 +++
 7 files changed, 23 insertions(+)

diff --git a/drivers/clk/sunxi/clk_a23.c b/drivers/clk/sunxi/clk_a23.c
index 0b5406c5b3..183c6275f3 100644
--- a/drivers/clk/sunxi/clk_a23.c
+++ b/drivers/clk/sunxi/clk_a23.c
@@ -38,6 +38,9 @@ static struct ccu_reset_map a23_resets[] = {
 	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
 	[RST_USB_HSIC]		= { 0x0cc, BIT(2) },
 
+	[RST_BUS_MMC0]		= { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		= { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		= { 0x2c0, BIT(10) },
 	[RST_BUS_OTG]		= { 0x2c0, BIT(24) },
 	[RST_BUS_EHCI]		= { 0x2c0, BIT(26) },
 	[RST_BUS_OHCI]		= { 0x2c0, BIT(29) },
diff --git a/drivers/clk/sunxi/clk_a31.c b/drivers/clk/sunxi/clk_a31.c
index 3c807bde77..15076d0e72 100644
--- a/drivers/clk/sunxi/clk_a31.c
+++ b/drivers/clk/sunxi/clk_a31.c
@@ -42,6 +42,10 @@ static struct ccu_reset_map a31_resets[] = {
 	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
 	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
 
+	[RST_AHB1_MMC0]		= { 0x2c0, BIT(8) },
+	[RST_AHB1_MMC1]		= { 0x2c0, BIT(9) },
+	[RST_AHB1_MMC2]		= { 0x2c0, BIT(10) },
+	[RST_AHB1_MMC3]		= { 0x2c0, BIT(11) },
 	[RST_AHB1_OTG]		= { 0x2c0, BIT(24) },
 	[RST_AHB1_EHCI0]	= { 0x2c0, BIT(26) },
 	[RST_AHB1_EHCI1]	= { 0x2c0, BIT(27) },
diff --git a/drivers/clk/sunxi/clk_a64.c b/drivers/clk/sunxi/clk_a64.c
index 62cd6d6464..9ef9b606d2 100644
--- a/drivers/clk/sunxi/clk_a64.c
+++ b/drivers/clk/sunxi/clk_a64.c
@@ -39,6 +39,9 @@ static struct ccu_reset_map a64_resets[] = {
 	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
 	[RST_USB_HSIC]		= { 0x0cc, BIT(2) },
 
+	[RST_BUS_MMC0]		= { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		= { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		= { 0x2c0, BIT(10) },
 	[RST_BUS_OTG]		= { 0x2c0, BIT(23) },
 	[RST_BUS_EHCI0]		= { 0x2c0, BIT(24) },
 	[RST_BUS_EHCI1]		= { 0x2c0, BIT(25) },
diff --git a/drivers/clk/sunxi/clk_a83t.c b/drivers/clk/sunxi/clk_a83t.c
index a2e0ac7a26..47b7672e7f 100644
--- a/drivers/clk/sunxi/clk_a83t.c
+++ b/drivers/clk/sunxi/clk_a83t.c
@@ -37,6 +37,9 @@ static struct ccu_reset_map a83t_resets[] = {
 	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
 	[RST_USB_HSIC]		= { 0x0cc, BIT(2) },
 
+	[RST_BUS_MMC0]		= { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		= { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		= { 0x2c0, BIT(10) },
 	[RST_BUS_OTG]		= { 0x2c0, BIT(24) },
 	[RST_BUS_EHCI0]		= { 0x2c0, BIT(26) },
 	[RST_BUS_EHCI1]		= { 0x2c0, BIT(27) },
diff --git a/drivers/clk/sunxi/clk_h3.c b/drivers/clk/sunxi/clk_h3.c
index f467187c01..ad15aaae67 100644
--- a/drivers/clk/sunxi/clk_h3.c
+++ b/drivers/clk/sunxi/clk_h3.c
@@ -46,6 +46,9 @@ static struct ccu_reset_map h3_resets[] = {
 	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
 	[RST_USB_PHY3]		= { 0x0cc, BIT(3) },
 
+	[RST_BUS_MMC0]		= { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		= { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		= { 0x2c0, BIT(10) },
 	[RST_BUS_OTG]		= { 0x2c0, BIT(23) },
 	[RST_BUS_EHCI0]		= { 0x2c0, BIT(24) },
 	[RST_BUS_EHCI1]		= { 0x2c0, BIT(25) },
diff --git a/drivers/clk/sunxi/clk_r40.c b/drivers/clk/sunxi/clk_r40.c
index 9273f3b7ea..24c26ad3be 100644
--- a/drivers/clk/sunxi/clk_r40.c
+++ b/drivers/clk/sunxi/clk_r40.c
@@ -43,6 +43,10 @@ static struct ccu_reset_map r40_resets[] = {
 	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
 	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
 
+	[RST_BUS_MMC0]		= { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		= { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		= { 0x2c0, BIT(10) },
+	[RST_BUS_MMC3]		= { 0x2c0, BIT(11) },
 	[RST_BUS_OTG]		= { 0x2c0, BIT(25) },
 	[RST_BUS_EHCI0]		= { 0x2c0, BIT(26) },
 	[RST_BUS_EHCI1]		= { 0x2c0, BIT(27) },
diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c
index e0d757debe..6eeec201a2 100644
--- a/drivers/clk/sunxi/clk_v3s.c
+++ b/drivers/clk/sunxi/clk_v3s.c
@@ -28,6 +28,9 @@ static struct ccu_clk_map v3s_clks[] = {
 static struct ccu_reset_map v3s_resets[] = {
 	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
 
+	[RST_BUS_MMC0]		= { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		= { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		= { 0x2c0, BIT(10) },
 	[RST_BUS_OTG]		= { 0x2c0, BIT(24) },
 };
 
-- 
2.18.0.321.gffc6fa0e3

  parent reply	other threads:[~2018-08-10  6:06 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-10  6:06 [U-Boot] [PATCH v2 00/53] clk: Add Allwinner CLK, RESET support Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 01/53] clk: Kconfig: Ascending order to sub directiory kconfigs Jagan Teki
2018-08-13 10:34   ` Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 02/53] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 03/53] reset: Add default request ops Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 04/53] reset: Add Allwinner RESET driver Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 05/53] clk: sunxi: Add Allwinner H3/H5 CLK driver Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 06/53] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 07/53] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 08/53] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 09/53] clk: sunxi: Add Allwinner A23 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 10/53] clk: sunxi: a23: Add CLK support for A33 Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 11/53] clk: sunxi: Add Allwinner A83T CLK driver Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 12/53] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 13/53] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 14/53] sunxi: Enable CLK Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 15/53] musb-new: sunxi: Use CLK and RESET support Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 16/53] phy: sun4i-usb: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 17/53] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 18/53] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 19/53] clk: sunxi: Implement AHB bus MMC clocks Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 20/53] clk: sunxi: Implement direct " Jagan Teki
2018-08-10  6:06 ` Jagan Teki [this message]
2018-08-10  6:06 ` [U-Boot] [PATCH v2 22/53] reset: Add get reset by name optionally Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 23/53] reset: Add reset valid Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 24/53] dm: mmc: sunxi: Add CLK and RESET support Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 25/53] fastboot: sunxi: Update fastboot mmc default device Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 26/53] env: sunxi: Update default env fat device Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 27/53] sunxi: Use mmc_bootdev=2 for MMC2 boot Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 28/53] sunxi: A20: Enable DM_MMC Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 29/53] mmc: sunxi: Add mmc, emmc H5/A64 compatible Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 30/53] sunxi: H3_H5: Enable DM_MMC Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 31/53] sunxi: A64: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 32/53] mmc: sunxi: Add A83T emmc compatible Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 33/53] sunxi: A83T: Enable DM_MMC Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 34/53] sunxi: V40: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 35/53] sunxi: A13/A31: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 36/53] sunxi: A23/A33/V3S: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 37/53] clk: sunxi: Implement SPI clocks Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 38/53] clk: sunxi: Implement SPI resets Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 39/53] spi: sun4i: Add CLK support Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 40/53] spi: Add Allwinner A31 SPI driver Jagan Teki
2018-08-11  0:38   ` Fahad Sadah
2018-08-10  6:06 ` [U-Boot] [PATCH v2 41/53] clk: sunxi: Implement UART clocks Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 42/53] clk: sunxi: Implement UART resets Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 43/53] clk: sunxi: Implement Ethernet clocks Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 44/53] clk: sunxi: Implement Ethernet resets Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 45/53] net: sunxi_emac: Add CLK support Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 46/53] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 47/53] net: sun8i_emac: Add CLK and RESET support Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 48/53] clk: Get the CLK by index without device Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 49/53] clk: Use clk_get_by_index_tail() Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 50/53] reset: Get the RESET by index without device Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 51/53] clk: sunxi: h3: Implement EPHY CLK and RESET Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 52/53] net: sun8i_emac: Add EPHY CLK and RESET support Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 53/53] board: sunxi: gmac: Remove Ethernet clock and reset Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180810060711.6547-22-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox